Skip to content
[Jenkins]Jenkins
log in

Changes

#6 (Jan 17, 2024, 6:54:47 AM)

  1. Fix unit error in SimpleLiquidWater model — quentinl / githubweb
  2. Express the pressure rate in relation to Pa / bar conversion. — noreply / githubweb
  3. Fix unit error in TestOnly.MoistAir — Tidefelt Henrik / githubweb
  4. Fix R134a_setState_pTX and WaterIF97_dewEnthalpy in the same way — Tidefelt Henrik / githubweb
  5. Fix unit error in Thyristor — noreply / githubweb
  6. Add Friction test to ModelicaTest.Translational package — maximilian.kormann / githubweb
  7. Fix position prescribed friction for both moving directions — maximilian.kormann / githubweb
  8. Add more test models — maximilian.kormann / githubweb
  9. Add failing test for Rotational Friction — maximilian.kormann / githubweb
  10. Fix position prescribed rotational friction for both moving directions — maximilian.kormann / githubweb
  11. Avoid having both start-value and initial equation. — Hans.Olsson / githubweb
  12. Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. — Hans.Olsson / githubweb
  13. Proper word — Hans.Olsson / githubweb
  14. Implement improvement suggested by @tobolar — maximilian.kormann / githubweb
  15. User's Guide: add recommendation for 'tab' and 'group' annotations — jakub.tobolar / githubweb
  16. Documentation: clarify mind-set of planar rotation — jakub.tobolar / githubweb
  17. Improve EN grammar — noreply / githubweb
  18. Add a rule priorizing the 'general' tab — jakub.tobolar / githubweb
  19. Add example how to define tab and group annotations — jakub.tobolar / githubweb
  20. Enhance the 'Tabs and Groups' example — jakub.tobolar / githubweb
  21. Add ZeroThresholds test — jakub.tobolar / githubweb
  22. Update Modelica/Media/package.mo — noreply / githubweb
  23. Fix unit errors in Examples.MoistAir — modelica / githubweb
  24. Fix unit error in IdealGasH2O — modelica / githubweb
  25. Fix unit errors in ReferenceAir.MoistAir — modelica / githubweb
  26. Make the new variable a parameter as it is more idiomatic. — noreply / githubweb
  27. Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. — dietmar.winkler / githubweb
  28. Proper word — dietmar.winkler / githubweb
  29. Avoid having both start-value and initial equation. — dietmar.winkler / githubweb
  30. Improve ElastoGap — HansOlsson / githubweb
  31. - added partial massFraction to partialMedium — dirk.zimmer / githubweb
  32. Update Modelica/Media/package.mo — noreply / githubweb
  33. Use spaces instead of tabs — noreply / githubweb
  34. Bump used Modelica language version to 3.6 (#4208) — noreply / githubweb
  35. A value with unit="1" should not have a time as start-value — HansOlsson / githubweb
  36. Time events instead of state events — HansOlsson / githubweb
  37. Replace "discrete input" by just "input" — Hans.Olsson / githubweb
  38. Remove unused functions (#4061) — noreply / githubweb
  39. Update .mailmap file — modelica / githubweb
  40. Upgrade zlib to v1.2.13 (#4047) — noreply / githubweb
  41. Fix typo (#4249) — noreply / githubweb
  42. Some generic Formatting guides - consistent with how classes are usually written. — HansOlsson / githubweb
  43. Use protected as a heading for a number of declarations. — HansOlsson / githubweb
  44. Avoid bad line-breaks in connect-annotation. — HansOlsson / githubweb
  45. Do not use tab. — HansOlsson / githubweb
  46. Remove trailing white-space — HansOlsson / githubweb
  47. The end of a class shall not be indented relative to class. — HansOlsson / githubweb
  48. RemoveTrailingWhiteSpace — HansOlsson / githubweb
  49. NoTab — HansOlsson / githubweb
  50. Even for redeclare extends ensure that class contents is indented relative to class. — HansOlsson / githubweb
  51. Indent annotation relative to class — HansOlsson / githubweb
  52. Documentation shall be indented relative to class — HansOlsson / githubweb
  53. And sensible formatting — HansOlsson / githubweb
  54. Use protected as heading consistently. — HansOlsson / githubweb
  55. Remove weird line-breaks and format equation consistently. — HansOlsson / githubweb
  56. Add separation rule as well. — HansOlsson / githubweb
  57. And apply the rule — HansOlsson / githubweb
  58. Update Modelica/Electrical/Machines/Sensors/CurrentQuasiRMSSensor.mo — HansOlsson / githubweb
  59. Apply suggestions from code review — HansOlsson / githubweb
  60. Apply suggestions from code review — HansOlsson / githubweb
  61. Specify how to handle modifier lists. — HansOlsson / githubweb
  62. TrailingWhiteSpace — HansOlsson / githubweb
  63. TrailingWhiteSpaceOnEmptyLine — HansOlsson / githubweb
  64. Revert "Fix position prescribed friction" — noreply / githubweb
  65. Revert "Merge pull request #4255 from modelica/revert-4129-fix-friction" — maximilian.kormann / githubweb
  66. Enhance a_relfric for forward/backward sliding — jakub.tobolar / githubweb
  67. Fix missing simulation time — noreply / githubweb
  68. Use Vector for visualization of forces and torques — tobolar / githubweb
  69. Use Vector for visualization of positions in Sensors and Joints — tobolar / githubweb
  70. Use Vector for visualization — tobolar / githubweb
  71. Update .mailmap file — modelica / githubweb
  72. resolves issue #4245 — Anton.Haumer / githubweb
  73. Set Evaluate = true for IdealTransformer.considerMagnetization — modelica / githubweb
  74. Partially revert 18320a68b295c9b0be7a5fade0420487ec0059dc (#4252) — noreply / githubweb
  75. Add badges for regression tests run by LTX (#4212) — noreply / githubweb
  76. Make third-party licenses explicit (#4268) — noreply / githubweb
  77. Utilize PressureSlope unit in Media consistently (#4262) — noreply / githubweb
  78. Fix loss factors in SharpEdgedOrifice (#4258) — noreply / githubweb
  79. Add ModelicaDuplicateString and ModelicaDuplicateStringWithErrorReturn (new in Modelica Language Specification version 3.5) (#3686) — noreply / githubweb

#6 (Jan 17, 2024, 6:54:47 AM)

  1. Fix unit error in SimpleLiquidWater model — quentinl / githubweb
  2. Express the pressure rate in relation to Pa / bar conversion. — noreply / githubweb
  3. Fix unit error in TestOnly.MoistAir — Tidefelt Henrik / githubweb
  4. Fix R134a_setState_pTX and WaterIF97_dewEnthalpy in the same way — Tidefelt Henrik / githubweb
  5. Fix unit error in Thyristor — noreply / githubweb
  6. Add Friction test to ModelicaTest.Translational package — maximilian.kormann / githubweb
  7. Fix position prescribed friction for both moving directions — maximilian.kormann / githubweb
  8. Add more test models — maximilian.kormann / githubweb
  9. Add failing test for Rotational Friction — maximilian.kormann / githubweb
  10. Fix position prescribed rotational friction for both moving directions — maximilian.kormann / githubweb
  11. Avoid having both start-value and initial equation. — Hans.Olsson / githubweb
  12. Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. — Hans.Olsson / githubweb
  13. Proper word — Hans.Olsson / githubweb
  14. Implement improvement suggested by @tobolar — maximilian.kormann / githubweb
  15. User's Guide: add recommendation for 'tab' and 'group' annotations — jakub.tobolar / githubweb
  16. Documentation: clarify mind-set of planar rotation — jakub.tobolar / githubweb
  17. Improve EN grammar — noreply / githubweb
  18. Add a rule priorizing the 'general' tab — jakub.tobolar / githubweb
  19. Add example how to define tab and group annotations — jakub.tobolar / githubweb
  20. Enhance the 'Tabs and Groups' example — jakub.tobolar / githubweb
  21. Add ZeroThresholds test — jakub.tobolar / githubweb
  22. Update Modelica/Media/package.mo — noreply / githubweb
  23. Fix unit errors in Examples.MoistAir — modelica / githubweb
  24. Fix unit error in IdealGasH2O — modelica / githubweb
  25. Fix unit errors in ReferenceAir.MoistAir — modelica / githubweb
  26. Make the new variable a parameter as it is more idiomatic. — noreply / githubweb
  27. Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. — dietmar.winkler / githubweb
  28. Proper word — dietmar.winkler / githubweb
  29. Avoid having both start-value and initial equation. — dietmar.winkler / githubweb
  30. Improve ElastoGap — HansOlsson / githubweb
  31. - added partial massFraction to partialMedium — dirk.zimmer / githubweb
  32. Update Modelica/Media/package.mo — noreply / githubweb
  33. Use spaces instead of tabs — noreply / githubweb
  34. Bump used Modelica language version to 3.6 (#4208) — noreply / githubweb
  35. A value with unit="1" should not have a time as start-value — HansOlsson / githubweb
  36. Time events instead of state events — HansOlsson / githubweb
  37. Replace "discrete input" by just "input" — Hans.Olsson / githubweb
  38. Remove unused functions (#4061) — noreply / githubweb
  39. Update .mailmap file — modelica / githubweb
  40. Upgrade zlib to v1.2.13 (#4047) — noreply / githubweb
  41. Fix typo (#4249) — noreply / githubweb
  42. Some generic Formatting guides - consistent with how classes are usually written. — HansOlsson / githubweb
  43. Use protected as a heading for a number of declarations. — HansOlsson / githubweb
  44. Avoid bad line-breaks in connect-annotation. — HansOlsson / githubweb
  45. Do not use tab. — HansOlsson / githubweb
  46. Remove trailing white-space — HansOlsson / githubweb
  47. The end of a class shall not be indented relative to class. — HansOlsson / githubweb
  48. RemoveTrailingWhiteSpace — HansOlsson / githubweb
  49. NoTab — HansOlsson / githubweb
  50. Even for redeclare extends ensure that class contents is indented relative to class. — HansOlsson / githubweb
  51. Indent annotation relative to class — HansOlsson / githubweb
  52. Documentation shall be indented relative to class — HansOlsson / githubweb
  53. And sensible formatting — HansOlsson / githubweb
  54. Use protected as heading consistently. — HansOlsson / githubweb
  55. Remove weird line-breaks and format equation consistently. — HansOlsson / githubweb
  56. Add separation rule as well. — HansOlsson / githubweb
  57. And apply the rule — HansOlsson / githubweb
  58. Update Modelica/Electrical/Machines/Sensors/CurrentQuasiRMSSensor.mo — HansOlsson / githubweb
  59. Apply suggestions from code review — HansOlsson / githubweb
  60. Apply suggestions from code review — HansOlsson / githubweb
  61. Specify how to handle modifier lists. — HansOlsson / githubweb
  62. TrailingWhiteSpace — HansOlsson / githubweb
  63. TrailingWhiteSpaceOnEmptyLine — HansOlsson / githubweb
  64. Revert "Fix position prescribed friction" — noreply / githubweb
  65. Revert "Merge pull request #4255 from modelica/revert-4129-fix-friction" — maximilian.kormann / githubweb
  66. Enhance a_relfric for forward/backward sliding — jakub.tobolar / githubweb
  67. Fix missing simulation time — noreply / githubweb
  68. Use Vector for visualization of forces and torques — tobolar / githubweb
  69. Use Vector for visualization of positions in Sensors and Joints — tobolar / githubweb
  70. Use Vector for visualization — tobolar / githubweb
  71. Update .mailmap file — modelica / githubweb
  72. resolves issue #4245 — Anton.Haumer / githubweb
  73. Set Evaluate = true for IdealTransformer.considerMagnetization — modelica / githubweb
  74. Partially revert 18320a68b295c9b0be7a5fade0420487ec0059dc (#4252) — noreply / githubweb
  75. Add badges for regression tests run by LTX (#4212) — noreply / githubweb
  76. Make third-party licenses explicit (#4268) — noreply / githubweb
  77. Utilize PressureSlope unit in Media consistently (#4262) — noreply / githubweb
  78. Fix loss factors in SharpEdgedOrifice (#4258) — noreply / githubweb
  79. Add ModelicaDuplicateString and ModelicaDuplicateStringWithErrorReturn (new in Modelica Language Specification version 3.5) (#3686) — noreply / githubweb

#6 (Jan 17, 2024, 6:54:47 AM)

  1. Fix unit error in SimpleLiquidWater model — quentinl / githubweb
  2. Express the pressure rate in relation to Pa / bar conversion. — noreply / githubweb
  3. Fix unit error in TestOnly.MoistAir — Tidefelt Henrik / githubweb
  4. Fix R134a_setState_pTX and WaterIF97_dewEnthalpy in the same way — Tidefelt Henrik / githubweb
  5. Fix unit error in Thyristor — noreply / githubweb
  6. Add Friction test to ModelicaTest.Translational package — maximilian.kormann / githubweb
  7. Fix position prescribed friction for both moving directions — maximilian.kormann / githubweb
  8. Add more test models — maximilian.kormann / githubweb
  9. Add failing test for Rotational Friction — maximilian.kormann / githubweb
  10. Fix position prescribed rotational friction for both moving directions — maximilian.kormann / githubweb
  11. Avoid having both start-value and initial equation. — Hans.Olsson / githubweb
  12. Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. — Hans.Olsson / githubweb
  13. Proper word — Hans.Olsson / githubweb
  14. Implement improvement suggested by @tobolar — maximilian.kormann / githubweb
  15. User's Guide: add recommendation for 'tab' and 'group' annotations — jakub.tobolar / githubweb
  16. Documentation: clarify mind-set of planar rotation — jakub.tobolar / githubweb
  17. Improve EN grammar — noreply / githubweb
  18. Add a rule priorizing the 'general' tab — jakub.tobolar / githubweb
  19. Add example how to define tab and group annotations — jakub.tobolar / githubweb
  20. Enhance the 'Tabs and Groups' example — jakub.tobolar / githubweb
  21. Add ZeroThresholds test — jakub.tobolar / githubweb
  22. Update Modelica/Media/package.mo — noreply / githubweb
  23. Fix unit errors in Examples.MoistAir — modelica / githubweb
  24. Fix unit error in IdealGasH2O — modelica / githubweb
  25. Fix unit errors in ReferenceAir.MoistAir — modelica / githubweb
  26. Make the new variable a parameter as it is more idiomatic. — noreply / githubweb
  27. Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. — dietmar.winkler / githubweb
  28. Proper word — dietmar.winkler / githubweb
  29. Avoid having both start-value and initial equation. — dietmar.winkler / githubweb
  30. Improve ElastoGap — HansOlsson / githubweb
  31. - added partial massFraction to partialMedium — dirk.zimmer / githubweb
  32. Update Modelica/Media/package.mo — noreply / githubweb
  33. Use spaces instead of tabs — noreply / githubweb
  34. Bump used Modelica language version to 3.6 (#4208) — noreply / githubweb
  35. A value with unit="1" should not have a time as start-value — HansOlsson / githubweb
  36. Time events instead of state events — HansOlsson / githubweb
  37. Replace "discrete input" by just "input" — Hans.Olsson / githubweb
  38. Remove unused functions (#4061) — noreply / githubweb
  39. Update .mailmap file — modelica / githubweb
  40. Upgrade zlib to v1.2.13 (#4047) — noreply / githubweb
  41. Fix typo (#4249) — noreply / githubweb
  42. Some generic Formatting guides - consistent with how classes are usually written. — HansOlsson / githubweb
  43. Use protected as a heading for a number of declarations. — HansOlsson / githubweb
  44. Avoid bad line-breaks in connect-annotation. — HansOlsson / githubweb
  45. Do not use tab. — HansOlsson / githubweb
  46. Remove trailing white-space — HansOlsson / githubweb
  47. The end of a class shall not be indented relative to class. — HansOlsson / githubweb
  48. RemoveTrailingWhiteSpace — HansOlsson / githubweb
  49. NoTab — HansOlsson / githubweb
  50. Even for redeclare extends ensure that class contents is indented relative to class. — HansOlsson / githubweb
  51. Indent annotation relative to class — HansOlsson / githubweb
  52. Documentation shall be indented relative to class — HansOlsson / githubweb
  53. And sensible formatting — HansOlsson / githubweb
  54. Use protected as heading consistently. — HansOlsson / githubweb
  55. Remove weird line-breaks and format equation consistently. — HansOlsson / githubweb
  56. Add separation rule as well. — HansOlsson / githubweb
  57. And apply the rule — HansOlsson / githubweb
  58. Update Modelica/Electrical/Machines/Sensors/CurrentQuasiRMSSensor.mo — HansOlsson / githubweb
  59. Apply suggestions from code review — HansOlsson / githubweb
  60. Apply suggestions from code review — HansOlsson / githubweb
  61. Specify how to handle modifier lists. — HansOlsson / githubweb
  62. TrailingWhiteSpace — HansOlsson / githubweb
  63. TrailingWhiteSpaceOnEmptyLine — HansOlsson / githubweb
  64. Revert "Fix position prescribed friction" — noreply / githubweb
  65. Revert "Merge pull request #4255 from modelica/revert-4129-fix-friction" — maximilian.kormann / githubweb
  66. Enhance a_relfric for forward/backward sliding — jakub.tobolar / githubweb
  67. Fix missing simulation time — noreply / githubweb
  68. Use Vector for visualization of forces and torques — tobolar / githubweb
  69. Use Vector for visualization of positions in Sensors and Joints — tobolar / githubweb
  70. Use Vector for visualization — tobolar / githubweb
  71. Update .mailmap file — modelica / githubweb
  72. resolves issue #4245 — Anton.Haumer / githubweb
  73. Set Evaluate = true for IdealTransformer.considerMagnetization — modelica / githubweb
  74. Partially revert 18320a68b295c9b0be7a5fade0420487ec0059dc (#4252) — noreply / githubweb
  75. Add badges for regression tests run by LTX (#4212) — noreply / githubweb
  76. Make third-party licenses explicit (#4268) — noreply / githubweb
  77. Utilize PressureSlope unit in Media consistently (#4262) — noreply / githubweb
  78. Fix loss factors in SharpEdgedOrifice (#4258) — noreply / githubweb
  79. Add ModelicaDuplicateString and ModelicaDuplicateStringWithErrorReturn (new in Modelica Language Specification version 3.5) (#3686) — noreply / githubweb

#6 (Jan 17, 2024, 6:54:47 AM)

  1. Fix unit error in SimpleLiquidWater model — quentinl / githubweb
  2. Express the pressure rate in relation to Pa / bar conversion. — noreply / githubweb
  3. Fix unit error in TestOnly.MoistAir — Tidefelt Henrik / githubweb
  4. Fix R134a_setState_pTX and WaterIF97_dewEnthalpy in the same way — Tidefelt Henrik / githubweb
  5. Fix unit error in Thyristor — noreply / githubweb
  6. Add Friction test to ModelicaTest.Translational package — maximilian.kormann / githubweb
  7. Fix position prescribed friction for both moving directions — maximilian.kormann / githubweb
  8. Add more test models — maximilian.kormann / githubweb
  9. Add failing test for Rotational Friction — maximilian.kormann / githubweb
  10. Fix position prescribed rotational friction for both moving directions — maximilian.kormann / githubweb
  11. Avoid having both start-value and initial equation. — Hans.Olsson / githubweb
  12. Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. — Hans.Olsson / githubweb
  13. Proper word — Hans.Olsson / githubweb
  14. Implement improvement suggested by @tobolar — maximilian.kormann / githubweb
  15. User's Guide: add recommendation for 'tab' and 'group' annotations — jakub.tobolar / githubweb
  16. Documentation: clarify mind-set of planar rotation — jakub.tobolar / githubweb
  17. Improve EN grammar — noreply / githubweb
  18. Add a rule priorizing the 'general' tab — jakub.tobolar / githubweb
  19. Add example how to define tab and group annotations — jakub.tobolar / githubweb
  20. Enhance the 'Tabs and Groups' example — jakub.tobolar / githubweb
  21. Add ZeroThresholds test — jakub.tobolar / githubweb
  22. Update Modelica/Media/package.mo — noreply / githubweb
  23. Fix unit errors in Examples.MoistAir — modelica / githubweb
  24. Fix unit error in IdealGasH2O — modelica / githubweb
  25. Fix unit errors in ReferenceAir.MoistAir — modelica / githubweb
  26. Make the new variable a parameter as it is more idiomatic. — noreply / githubweb
  27. Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. — dietmar.winkler / githubweb
  28. Proper word — dietmar.winkler / githubweb
  29. Avoid having both start-value and initial equation. — dietmar.winkler / githubweb
  30. Improve ElastoGap — HansOlsson / githubweb
  31. - added partial massFraction to partialMedium — dirk.zimmer / githubweb
  32. Update Modelica/Media/package.mo — noreply / githubweb
  33. Use spaces instead of tabs — noreply / githubweb
  34. Bump used Modelica language version to 3.6 (#4208) — noreply / githubweb
  35. A value with unit="1" should not have a time as start-value — HansOlsson / githubweb
  36. Time events instead of state events — HansOlsson / githubweb
  37. Replace "discrete input" by just "input" — Hans.Olsson / githubweb
  38. Remove unused functions (#4061) — noreply / githubweb
  39. Update .mailmap file — modelica / githubweb
  40. Upgrade zlib to v1.2.13 (#4047) — noreply / githubweb
  41. Fix typo (#4249) — noreply / githubweb
  42. Some generic Formatting guides - consistent with how classes are usually written. — HansOlsson / githubweb
  43. Use protected as a heading for a number of declarations. — HansOlsson / githubweb
  44. Avoid bad line-breaks in connect-annotation. — HansOlsson / githubweb
  45. Do not use tab. — HansOlsson / githubweb
  46. Remove trailing white-space — HansOlsson / githubweb
  47. The end of a class shall not be indented relative to class. — HansOlsson / githubweb
  48. RemoveTrailingWhiteSpace — HansOlsson / githubweb
  49. NoTab — HansOlsson / githubweb
  50. Even for redeclare extends ensure that class contents is indented relative to class. — HansOlsson / githubweb
  51. Indent annotation relative to class — HansOlsson / githubweb
  52. Documentation shall be indented relative to class — HansOlsson / githubweb
  53. And sensible formatting — HansOlsson / githubweb
  54. Use protected as heading consistently. — HansOlsson / githubweb
  55. Remove weird line-breaks and format equation consistently. — HansOlsson / githubweb
  56. Add separation rule as well. — HansOlsson / githubweb
  57. And apply the rule — HansOlsson / githubweb
  58. Update Modelica/Electrical/Machines/Sensors/CurrentQuasiRMSSensor.mo — HansOlsson / githubweb
  59. Apply suggestions from code review — HansOlsson / githubweb
  60. Apply suggestions from code review — HansOlsson / githubweb
  61. Specify how to handle modifier lists. — HansOlsson / githubweb
  62. TrailingWhiteSpace — HansOlsson / githubweb
  63. TrailingWhiteSpaceOnEmptyLine — HansOlsson / githubweb
  64. Revert "Fix position prescribed friction" — noreply / githubweb
  65. Revert "Merge pull request #4255 from modelica/revert-4129-fix-friction" — maximilian.kormann / githubweb
  66. Enhance a_relfric for forward/backward sliding — jakub.tobolar / githubweb
  67. Fix missing simulation time — noreply / githubweb
  68. Use Vector for visualization of forces and torques — tobolar / githubweb
  69. Use Vector for visualization of positions in Sensors and Joints — tobolar / githubweb
  70. Use Vector for visualization — tobolar / githubweb
  71. Update .mailmap file — modelica / githubweb
  72. resolves issue #4245 — Anton.Haumer / githubweb
  73. Set Evaluate = true for IdealTransformer.considerMagnetization — modelica / githubweb
  74. Partially revert 18320a68b295c9b0be7a5fade0420487ec0059dc (#4252) — noreply / githubweb
  75. Add badges for regression tests run by LTX (#4212) — noreply / githubweb
  76. Make third-party licenses explicit (#4268) — noreply / githubweb
  77. Utilize PressureSlope unit in Media consistently (#4262) — noreply / githubweb
  78. Fix loss factors in SharpEdgedOrifice (#4258) — noreply / githubweb
  79. Add ModelicaDuplicateString and ModelicaDuplicateStringWithErrorReturn (new in Modelica Language Specification version 3.5) (#3686) — noreply / githubweb

#5 (Dec 19, 2023, 6:39:59 PM)

  1. R_s for each ideal gas record now calculated with constant R_NASA_2002 — 84810440+Parti-Gyle / githubweb

#3 (Dec 12, 2023, 4:46:27 PM)

  1. Reduce guess for initial temperature difference across wall. — Hans.Olsson / githubweb
  2. Use prefix style 'quantity' for FixedBoundary.X — Tidefelt Henrik / githubweb
  3. Remove modification of 'quantity' — noreply / githubweb
  4. Remove empty modifications — Tidefelt Henrik / githubweb
  5. Fix unit errors in ArmatureStroke — Tidefelt Henrik / githubweb
  6. refs #4174: Fix (and rename) parameters (#4176) — noreply / githubweb

#3 (Dec 12, 2023, 4:46:27 PM)

  1. Reduce guess for initial temperature difference across wall. — Hans.Olsson / githubweb
  2. Use prefix style 'quantity' for FixedBoundary.X — Tidefelt Henrik / githubweb
  3. Remove modification of 'quantity' — noreply / githubweb
  4. Remove empty modifications — Tidefelt Henrik / githubweb
  5. Fix unit errors in ArmatureStroke — Tidefelt Henrik / githubweb
  6. refs #4174: Fix (and rename) parameters (#4176) — noreply / githubweb

#3 (Dec 12, 2023, 4:46:27 PM)

  1. Reduce guess for initial temperature difference across wall. — Hans.Olsson / githubweb
  2. Use prefix style 'quantity' for FixedBoundary.X — Tidefelt Henrik / githubweb
  3. Remove modification of 'quantity' — noreply / githubweb
  4. Remove empty modifications — Tidefelt Henrik / githubweb
  5. Fix unit errors in ArmatureStroke — Tidefelt Henrik / githubweb
  6. refs #4174: Fix (and rename) parameters (#4176) — noreply / githubweb

#3 (Dec 12, 2023, 4:46:27 PM)

  1. Reduce guess for initial temperature difference across wall. — Hans.Olsson / githubweb
  2. Use prefix style 'quantity' for FixedBoundary.X — Tidefelt Henrik / githubweb
  3. Remove modification of 'quantity' — noreply / githubweb
  4. Remove empty modifications — Tidefelt Henrik / githubweb
  5. Fix unit errors in ArmatureStroke — Tidefelt Henrik / githubweb
  6. refs #4174: Fix (and rename) parameters (#4176) — noreply / githubweb

#3 (Dec 12, 2023, 4:46:27 PM)

  1. Reduce guess for initial temperature difference across wall. — Hans.Olsson / githubweb
  2. Use prefix style 'quantity' for FixedBoundary.X — Tidefelt Henrik / githubweb
  3. Remove modification of 'quantity' — noreply / githubweb
  4. Remove empty modifications — Tidefelt Henrik / githubweb
  5. Fix unit errors in ArmatureStroke — Tidefelt Henrik / githubweb
  6. refs #4174: Fix (and rename) parameters (#4176) — noreply / githubweb

#3 (Dec 12, 2023, 4:46:27 PM)

  1. Reduce guess for initial temperature difference across wall. — Hans.Olsson / githubweb
  2. Use prefix style 'quantity' for FixedBoundary.X — Tidefelt Henrik / githubweb
  3. Remove modification of 'quantity' — noreply / githubweb
  4. Remove empty modifications — Tidefelt Henrik / githubweb
  5. Fix unit errors in ArmatureStroke — Tidefelt Henrik / githubweb
  6. refs #4174: Fix (and rename) parameters (#4176) — noreply / githubweb

#3 (Dec 12, 2023, 4:46:27 PM)

  1. Reduce guess for initial temperature difference across wall. — Hans.Olsson / githubweb
  2. Use prefix style 'quantity' for FixedBoundary.X — Tidefelt Henrik / githubweb
  3. Remove modification of 'quantity' — noreply / githubweb
  4. Remove empty modifications — Tidefelt Henrik / githubweb
  5. Fix unit errors in ArmatureStroke — Tidefelt Henrik / githubweb
  6. refs #4174: Fix (and rename) parameters (#4176) — noreply / githubweb

#3 (Dec 12, 2023, 4:46:27 PM)

  1. Reduce guess for initial temperature difference across wall. — Hans.Olsson / githubweb
  2. Use prefix style 'quantity' for FixedBoundary.X — Tidefelt Henrik / githubweb
  3. Remove modification of 'quantity' — noreply / githubweb
  4. Remove empty modifications — Tidefelt Henrik / githubweb
  5. Fix unit errors in ArmatureStroke — Tidefelt Henrik / githubweb
  6. refs #4174: Fix (and rename) parameters (#4176) — noreply / githubweb

#2 (Dec 11, 2023, 8:08:50 PM)

  1. Remove unit-casting — Hans.Olsson / githubweb
  2. Remove all uses of unitFrequency. That was previously necessary when Gain.k had unit 1 — Hans.Olsson / githubweb