Summary
- Fix unit error in SimpleLiquidWater model (details)
- Express the pressure rate in relation to Pa / bar conversion. (details)
- Fix unit error in TestOnly.MoistAir (details)
- Fix R134a_setState_pTX and WaterIF97_dewEnthalpy in the same way (details)
- Fix unit error in Thyristor (details)
- Add Friction test to ModelicaTest.Translational package (details)
- Fix position prescribed friction for both moving directions (details)
- Add more test models (details)
- Add failing test for Rotational Friction (details)
- Fix position prescribed rotational friction for both moving directions (details)
- Cast result of malloc (details)
- Avoid having both start-value and initial equation. (details)
- Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. (details)
- Proper word (details)
- Implement improvement suggested by @tobolar (details)
- User's Guide: add recommendation for 'tab' and 'group' annotations (details)
- Documentation: clarify mind-set of planar rotation (details)
- Improve EN grammar (details)
- Add a rule priorizing the 'general' tab (details)
- Add example how to define tab and group annotations (details)
- Enhance the 'Tabs and Groups' example (details)
- Add ZeroThresholds test (details)
- Update Modelica/Media/package.mo (details)
- Fix unit errors in Examples.MoistAir (details)
- Fix unit error in IdealGasH2O (details)
- Fix unit errors in ReferenceAir.MoistAir (details)
- Make the new variable a parameter as it is more idiomatic. (details)
- Remove newlines at end of Text primitive. (#4187) (details)
- Based on comments in #4156 just remove eps. (details)
- Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. (details)
- Proper word (details)
- Avoid having both start-value and initial equation. (details)
- Update .mailmap file (details)
- Remove call of localtime (details)
- Improve ElastoGap (details)
- - added partial massFraction to partialMedium (details)
- Update Modelica/Media/package.mo (details)
- Use spaces instead of tabs (details)
- Bump used Modelica language version to 3.6 (#4208) (details)
- A value with unit="1" should not have a time as start-value (details)
- Time events instead of state events (details)
- Replace "discrete input" by just "input" (details)
- Remove unused functions (#4061) (details)
- Update .mailmap file (details)
- Upgrade zlib to v1.2.13 (#4047) (details)
- Fix typo (#4249) (details)
- Some generic Formatting guides - consistent with how classes are usually written. (details)
- Use protected as a heading for a number of declarations. (details)
- Avoid bad line-breaks in connect-annotation. (details)
- Do not use tab. (details)
- Remove trailing white-space (details)
- The end of a class shall not be indented relative to class. (details)
- RemoveTrailingWhiteSpace (details)
- NoTab (details)
- Even for redeclare extends ensure that class contents is indented relative to class. (details)
- Indent annotation relative to class (details)
- Documentation shall be indented relative to class (details)
- And sensible formatting (details)
- Use protected as heading consistently. (details)
- Remove weird line-breaks and format equation consistently. (details)
- Add separation rule as well. (details)
- And apply the rule (details)
- Update Modelica/Electrical/Machines/Sensors/CurrentQuasiRMSSensor.mo (details)
- Apply suggestions from code review (details)
- Apply suggestions from code review (details)
- Specify how to handle modifier lists. (details)
- TrailingWhiteSpace (details)
- TrailingWhiteSpaceOnEmptyLine (details)
- Revert "Fix position prescribed friction" (details)
- Revert "Merge pull request #4255 from modelica/revert-4129-fix-friction" (details)
- Enhance a_relfric for forward/backward sliding (details)
- Fix missing simulation time (details)
- Use Vector for visualization of forces and torques (details)
- Use Vector for visualization of positions in Sensors and Joints (details)
- Use Vector for visualization (details)
- Update .mailmap file (details)
- resolves issue #4245 (details)
- Set Evaluate = true for IdealTransformer.considerMagnetization (details)
- Partially revert 18320a68b295c9b0be7a5fade0420487ec0059dc (#4252) (details)
- Add badges for regression tests run by LTX (#4212) (details)
- Make third-party licenses explicit (#4268) (details)
- Utilize PressureSlope unit in Media consistently (#4262) (details)
- Fix loss factors in SharpEdgedOrifice (#4258) (details)
- Add ModelicaDuplicateString and ModelicaDuplicateStringWithErrorReturn (new in Modelica Language Specification version 3.5) (#3686) (details)
- R_s for each ideal gas record now calculated with R_NASA (details)
- R_s for each ideal gas record now calculated with constant R_NASA_2002 (details)
- Fix dimension error of PumpCharacteristics.linearPower (#4259) (details)
- Remove `min=0` for StoichiometricCoefficient type in Units.mo (details)
Summary
- Fix unit error in SimpleLiquidWater model (details)
- Express the pressure rate in relation to Pa / bar conversion. (details)
- Fix unit error in TestOnly.MoistAir (details)
- Fix R134a_setState_pTX and WaterIF97_dewEnthalpy in the same way (details)
- Fix unit error in Thyristor (details)
- Add Friction test to ModelicaTest.Translational package (details)
- Fix position prescribed friction for both moving directions (details)
- Add more test models (details)
- Add failing test for Rotational Friction (details)
- Fix position prescribed rotational friction for both moving directions (details)
- Cast result of malloc (details)
- Avoid having both start-value and initial equation. (details)
- Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. (details)
- Proper word (details)
- Implement improvement suggested by @tobolar (details)
- User's Guide: add recommendation for 'tab' and 'group' annotations (details)
- Documentation: clarify mind-set of planar rotation (details)
- Improve EN grammar (details)
- Add a rule priorizing the 'general' tab (details)
- Add example how to define tab and group annotations (details)
- Enhance the 'Tabs and Groups' example (details)
- Add ZeroThresholds test (details)
- Update Modelica/Media/package.mo (details)
- Fix unit errors in Examples.MoistAir (details)
- Fix unit error in IdealGasH2O (details)
- Fix unit errors in ReferenceAir.MoistAir (details)
- Make the new variable a parameter as it is more idiomatic. (details)
- Remove newlines at end of Text primitive. (#4187) (details)
- Based on comments in #4156 just remove eps. (details)
- Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. (details)
- Proper word (details)
- Avoid having both start-value and initial equation. (details)
- Update .mailmap file (details)
- Remove call of localtime (details)
- Improve ElastoGap (details)
- - added partial massFraction to partialMedium (details)
- Update Modelica/Media/package.mo (details)
- Use spaces instead of tabs (details)
- Bump used Modelica language version to 3.6 (#4208) (details)
- A value with unit="1" should not have a time as start-value (details)
- Time events instead of state events (details)
- Replace "discrete input" by just "input" (details)
- Remove unused functions (#4061) (details)
- Update .mailmap file (details)
- Upgrade zlib to v1.2.13 (#4047) (details)
- Fix typo (#4249) (details)
- Some generic Formatting guides - consistent with how classes are usually written. (details)
- Use protected as a heading for a number of declarations. (details)
- Avoid bad line-breaks in connect-annotation. (details)
- Do not use tab. (details)
- Remove trailing white-space (details)
- The end of a class shall not be indented relative to class. (details)
- RemoveTrailingWhiteSpace (details)
- NoTab (details)
- Even for redeclare extends ensure that class contents is indented relative to class. (details)
- Indent annotation relative to class (details)
- Documentation shall be indented relative to class (details)
- And sensible formatting (details)
- Use protected as heading consistently. (details)
- Remove weird line-breaks and format equation consistently. (details)
- Add separation rule as well. (details)
- And apply the rule (details)
- Update Modelica/Electrical/Machines/Sensors/CurrentQuasiRMSSensor.mo (details)
- Apply suggestions from code review (details)
- Apply suggestions from code review (details)
- Specify how to handle modifier lists. (details)
- TrailingWhiteSpace (details)
- TrailingWhiteSpaceOnEmptyLine (details)
- Revert "Fix position prescribed friction" (details)
- Revert "Merge pull request #4255 from modelica/revert-4129-fix-friction" (details)
- Enhance a_relfric for forward/backward sliding (details)
- Fix missing simulation time (details)
- Use Vector for visualization of forces and torques (details)
- Use Vector for visualization of positions in Sensors and Joints (details)
- Use Vector for visualization (details)
- Update .mailmap file (details)
- resolves issue #4245 (details)
- Set Evaluate = true for IdealTransformer.considerMagnetization (details)
- Partially revert 18320a68b295c9b0be7a5fade0420487ec0059dc (#4252) (details)
- Add badges for regression tests run by LTX (#4212) (details)
- Make third-party licenses explicit (#4268) (details)
- Utilize PressureSlope unit in Media consistently (#4262) (details)
- Fix loss factors in SharpEdgedOrifice (#4258) (details)
- Add ModelicaDuplicateString and ModelicaDuplicateStringWithErrorReturn (new in Modelica Language Specification version 3.5) (#3686) (details)
- R_s for each ideal gas record now calculated with R_NASA (details)
- R_s for each ideal gas record now calculated with constant R_NASA_2002 (details)
- Fix dimension error of PumpCharacteristics.linearPower (#4259) (details)
- Remove `min=0` for StoichiometricCoefficient type in Units.mo (details)
Summary
- Fix unit error in SimpleLiquidWater model (details)
- Express the pressure rate in relation to Pa / bar conversion. (details)
- Fix unit error in TestOnly.MoistAir (details)
- Fix R134a_setState_pTX and WaterIF97_dewEnthalpy in the same way (details)
- Fix unit error in Thyristor (details)
- Add Friction test to ModelicaTest.Translational package (details)
- Fix position prescribed friction for both moving directions (details)
- Add more test models (details)
- Add failing test for Rotational Friction (details)
- Fix position prescribed rotational friction for both moving directions (details)
- Cast result of malloc (details)
- Avoid having both start-value and initial equation. (details)
- Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. (details)
- Proper word (details)
- Implement improvement suggested by @tobolar (details)
- User's Guide: add recommendation for 'tab' and 'group' annotations (details)
- Documentation: clarify mind-set of planar rotation (details)
- Improve EN grammar (details)
- Add a rule priorizing the 'general' tab (details)
- Add example how to define tab and group annotations (details)
- Enhance the 'Tabs and Groups' example (details)
- Add ZeroThresholds test (details)
- Update Modelica/Media/package.mo (details)
- Fix unit errors in Examples.MoistAir (details)
- Fix unit error in IdealGasH2O (details)
- Fix unit errors in ReferenceAir.MoistAir (details)
- Make the new variable a parameter as it is more idiomatic. (details)
- Remove newlines at end of Text primitive. (#4187) (details)
- Based on comments in #4156 just remove eps. (details)
- Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. (details)
- Proper word (details)
- Avoid having both start-value and initial equation. (details)
- Update .mailmap file (details)
- Remove call of localtime (details)
- Improve ElastoGap (details)
- - added partial massFraction to partialMedium (details)
- Update Modelica/Media/package.mo (details)
- Use spaces instead of tabs (details)
- Bump used Modelica language version to 3.6 (#4208) (details)
- A value with unit="1" should not have a time as start-value (details)
- Time events instead of state events (details)
- Replace "discrete input" by just "input" (details)
- Remove unused functions (#4061) (details)
- Update .mailmap file (details)
- Upgrade zlib to v1.2.13 (#4047) (details)
- Fix typo (#4249) (details)
- Some generic Formatting guides - consistent with how classes are usually written. (details)
- Use protected as a heading for a number of declarations. (details)
- Avoid bad line-breaks in connect-annotation. (details)
- Do not use tab. (details)
- Remove trailing white-space (details)
- The end of a class shall not be indented relative to class. (details)
- RemoveTrailingWhiteSpace (details)
- NoTab (details)
- Even for redeclare extends ensure that class contents is indented relative to class. (details)
- Indent annotation relative to class (details)
- Documentation shall be indented relative to class (details)
- And sensible formatting (details)
- Use protected as heading consistently. (details)
- Remove weird line-breaks and format equation consistently. (details)
- Add separation rule as well. (details)
- And apply the rule (details)
- Update Modelica/Electrical/Machines/Sensors/CurrentQuasiRMSSensor.mo (details)
- Apply suggestions from code review (details)
- Apply suggestions from code review (details)
- Specify how to handle modifier lists. (details)
- TrailingWhiteSpace (details)
- TrailingWhiteSpaceOnEmptyLine (details)
- Revert "Fix position prescribed friction" (details)
- Revert "Merge pull request #4255 from modelica/revert-4129-fix-friction" (details)
- Enhance a_relfric for forward/backward sliding (details)
- Fix missing simulation time (details)
- Use Vector for visualization of forces and torques (details)
- Use Vector for visualization of positions in Sensors and Joints (details)
- Use Vector for visualization (details)
- Update .mailmap file (details)
- resolves issue #4245 (details)
- Set Evaluate = true for IdealTransformer.considerMagnetization (details)
- Partially revert 18320a68b295c9b0be7a5fade0420487ec0059dc (#4252) (details)
- Add badges for regression tests run by LTX (#4212) (details)
- Make third-party licenses explicit (#4268) (details)
- Utilize PressureSlope unit in Media consistently (#4262) (details)
- Fix loss factors in SharpEdgedOrifice (#4258) (details)
- Add ModelicaDuplicateString and ModelicaDuplicateStringWithErrorReturn (new in Modelica Language Specification version 3.5) (#3686) (details)
- R_s for each ideal gas record now calculated with R_NASA (details)
- R_s for each ideal gas record now calculated with constant R_NASA_2002 (details)
- Fix dimension error of PumpCharacteristics.linearPower (#4259) (details)
- Remove `min=0` for StoichiometricCoefficient type in Units.mo (details)
Summary
- Fix unit error in SimpleLiquidWater model (details)
- Express the pressure rate in relation to Pa / bar conversion. (details)
- Fix unit error in TestOnly.MoistAir (details)
- Fix R134a_setState_pTX and WaterIF97_dewEnthalpy in the same way (details)
- Fix unit error in Thyristor (details)
- Add Friction test to ModelicaTest.Translational package (details)
- Fix position prescribed friction for both moving directions (details)
- Add more test models (details)
- Add failing test for Rotational Friction (details)
- Fix position prescribed rotational friction for both moving directions (details)
- Cast result of malloc (details)
- Avoid having both start-value and initial equation. (details)
- Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. (details)
- Proper word (details)
- Implement improvement suggested by @tobolar (details)
- User's Guide: add recommendation for 'tab' and 'group' annotations (details)
- Documentation: clarify mind-set of planar rotation (details)
- Improve EN grammar (details)
- Add a rule priorizing the 'general' tab (details)
- Add example how to define tab and group annotations (details)
- Enhance the 'Tabs and Groups' example (details)
- Add ZeroThresholds test (details)
- Update Modelica/Media/package.mo (details)
- Fix unit errors in Examples.MoistAir (details)
- Fix unit error in IdealGasH2O (details)
- Fix unit errors in ReferenceAir.MoistAir (details)
- Make the new variable a parameter as it is more idiomatic. (details)
- Remove newlines at end of Text primitive. (#4187) (details)
- Based on comments in #4156 just remove eps. (details)
- Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. (details)
- Proper word (details)
- Avoid having both start-value and initial equation. (details)
- Update .mailmap file (details)
- Remove call of localtime (details)
- Improve ElastoGap (details)
- - added partial massFraction to partialMedium (details)
- Update Modelica/Media/package.mo (details)
- Use spaces instead of tabs (details)
- Bump used Modelica language version to 3.6 (#4208) (details)
- A value with unit="1" should not have a time as start-value (details)
- Time events instead of state events (details)
- Replace "discrete input" by just "input" (details)
- Remove unused functions (#4061) (details)
- Update .mailmap file (details)
- Upgrade zlib to v1.2.13 (#4047) (details)
- Fix typo (#4249) (details)
- Some generic Formatting guides - consistent with how classes are usually written. (details)
- Use protected as a heading for a number of declarations. (details)
- Avoid bad line-breaks in connect-annotation. (details)
- Do not use tab. (details)
- Remove trailing white-space (details)
- The end of a class shall not be indented relative to class. (details)
- RemoveTrailingWhiteSpace (details)
- NoTab (details)
- Even for redeclare extends ensure that class contents is indented relative to class. (details)
- Indent annotation relative to class (details)
- Documentation shall be indented relative to class (details)
- And sensible formatting (details)
- Use protected as heading consistently. (details)
- Remove weird line-breaks and format equation consistently. (details)
- Add separation rule as well. (details)
- And apply the rule (details)
- Update Modelica/Electrical/Machines/Sensors/CurrentQuasiRMSSensor.mo (details)
- Apply suggestions from code review (details)
- Apply suggestions from code review (details)
- Specify how to handle modifier lists. (details)
- TrailingWhiteSpace (details)
- TrailingWhiteSpaceOnEmptyLine (details)
- Revert "Fix position prescribed friction" (details)
- Revert "Merge pull request #4255 from modelica/revert-4129-fix-friction" (details)
- Enhance a_relfric for forward/backward sliding (details)
- Fix missing simulation time (details)
- Use Vector for visualization of forces and torques (details)
- Use Vector for visualization of positions in Sensors and Joints (details)
- Use Vector for visualization (details)
- Update .mailmap file (details)
- resolves issue #4245 (details)
- Set Evaluate = true for IdealTransformer.considerMagnetization (details)
- Partially revert 18320a68b295c9b0be7a5fade0420487ec0059dc (#4252) (details)
- Add badges for regression tests run by LTX (#4212) (details)
- Make third-party licenses explicit (#4268) (details)
- Utilize PressureSlope unit in Media consistently (#4262) (details)
- Fix loss factors in SharpEdgedOrifice (#4258) (details)
- Add ModelicaDuplicateString and ModelicaDuplicateStringWithErrorReturn (new in Modelica Language Specification version 3.5) (#3686) (details)
- R_s for each ideal gas record now calculated with R_NASA (details)
- R_s for each ideal gas record now calculated with constant R_NASA_2002 (details)
- Fix dimension error of PumpCharacteristics.linearPower (#4259) (details)
- Remove `min=0` for StoichiometricCoefficient type in Units.mo (details)
Summary
- Fix unit error in SimpleLiquidWater model (details)
- Express the pressure rate in relation to Pa / bar conversion. (details)
- Fix unit error in TestOnly.MoistAir (details)
- Fix R134a_setState_pTX and WaterIF97_dewEnthalpy in the same way (details)
- Fix unit error in Thyristor (details)
- Add Friction test to ModelicaTest.Translational package (details)
- Fix position prescribed friction for both moving directions (details)
- Add more test models (details)
- Add failing test for Rotational Friction (details)
- Fix position prescribed rotational friction for both moving directions (details)
- Cast result of malloc (details)
- Avoid having both start-value and initial equation. (details)
- Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. (details)
- Proper word (details)
- Implement improvement suggested by @tobolar (details)
- User's Guide: add recommendation for 'tab' and 'group' annotations (details)
- Documentation: clarify mind-set of planar rotation (details)
- Improve EN grammar (details)
- Add a rule priorizing the 'general' tab (details)
- Add example how to define tab and group annotations (details)
- Enhance the 'Tabs and Groups' example (details)
- Add ZeroThresholds test (details)
- Update Modelica/Media/package.mo (details)
- Fix unit errors in Examples.MoistAir (details)
- Fix unit error in IdealGasH2O (details)
- Fix unit errors in ReferenceAir.MoistAir (details)
- Make the new variable a parameter as it is more idiomatic. (details)
- Remove newlines at end of Text primitive. (#4187) (details)
- Based on comments in #4156 just remove eps. (details)
- Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. (details)
- Proper word (details)
- Avoid having both start-value and initial equation. (details)
- Update .mailmap file (details)
- Remove call of localtime (details)
- Improve ElastoGap (details)
- - added partial massFraction to partialMedium (details)
- Update Modelica/Media/package.mo (details)
- Use spaces instead of tabs (details)
- Bump used Modelica language version to 3.6 (#4208) (details)
- A value with unit="1" should not have a time as start-value (details)
- Time events instead of state events (details)
- Replace "discrete input" by just "input" (details)
- Remove unused functions (#4061) (details)
- Update .mailmap file (details)
- Upgrade zlib to v1.2.13 (#4047) (details)
- Fix typo (#4249) (details)
- Some generic Formatting guides - consistent with how classes are usually written. (details)
- Use protected as a heading for a number of declarations. (details)
- Avoid bad line-breaks in connect-annotation. (details)
- Do not use tab. (details)
- Remove trailing white-space (details)
- The end of a class shall not be indented relative to class. (details)
- RemoveTrailingWhiteSpace (details)
- NoTab (details)
- Even for redeclare extends ensure that class contents is indented relative to class. (details)
- Indent annotation relative to class (details)
- Documentation shall be indented relative to class (details)
- And sensible formatting (details)
- Use protected as heading consistently. (details)
- Remove weird line-breaks and format equation consistently. (details)
- Add separation rule as well. (details)
- And apply the rule (details)
- Update Modelica/Electrical/Machines/Sensors/CurrentQuasiRMSSensor.mo (details)
- Apply suggestions from code review (details)
- Apply suggestions from code review (details)
- Specify how to handle modifier lists. (details)
- TrailingWhiteSpace (details)
- TrailingWhiteSpaceOnEmptyLine (details)
- Revert "Fix position prescribed friction" (details)
- Revert "Merge pull request #4255 from modelica/revert-4129-fix-friction" (details)
- Enhance a_relfric for forward/backward sliding (details)
- Fix missing simulation time (details)
- Use Vector for visualization of forces and torques (details)
- Use Vector for visualization of positions in Sensors and Joints (details)
- Use Vector for visualization (details)
- Update .mailmap file (details)
- resolves issue #4245 (details)
- Set Evaluate = true for IdealTransformer.considerMagnetization (details)
- Partially revert 18320a68b295c9b0be7a5fade0420487ec0059dc (#4252) (details)
- Add badges for regression tests run by LTX (#4212) (details)
- Make third-party licenses explicit (#4268) (details)
- Utilize PressureSlope unit in Media consistently (#4262) (details)
- Fix loss factors in SharpEdgedOrifice (#4258) (details)
- Add ModelicaDuplicateString and ModelicaDuplicateStringWithErrorReturn (new in Modelica Language Specification version 3.5) (#3686) (details)
- R_s for each ideal gas record now calculated with R_NASA (details)
- R_s for each ideal gas record now calculated with constant R_NASA_2002 (details)
- Fix dimension error of PumpCharacteristics.linearPower (#4259) (details)
- Remove `min=0` for StoichiometricCoefficient type in Units.mo (details)
Summary
- Fix unit error in SimpleLiquidWater model (details)
- Express the pressure rate in relation to Pa / bar conversion. (details)
- Fix unit error in TestOnly.MoistAir (details)
- Fix R134a_setState_pTX and WaterIF97_dewEnthalpy in the same way (details)
- Fix unit error in Thyristor (details)
- Add Friction test to ModelicaTest.Translational package (details)
- Fix position prescribed friction for both moving directions (details)
- Add more test models (details)
- Add failing test for Rotational Friction (details)
- Fix position prescribed rotational friction for both moving directions (details)
- Cast result of malloc (details)
- Avoid having both start-value and initial equation. (details)
- Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. (details)
- Proper word (details)
- Implement improvement suggested by @tobolar (details)
- User's Guide: add recommendation for 'tab' and 'group' annotations (details)
- Documentation: clarify mind-set of planar rotation (details)
- Improve EN grammar (details)
- Add a rule priorizing the 'general' tab (details)
- Add example how to define tab and group annotations (details)
- Enhance the 'Tabs and Groups' example (details)
- Add ZeroThresholds test (details)
- Update Modelica/Media/package.mo (details)
- Fix unit errors in Examples.MoistAir (details)
- Fix unit error in IdealGasH2O (details)
- Fix unit errors in ReferenceAir.MoistAir (details)
- Make the new variable a parameter as it is more idiomatic. (details)
- Remove newlines at end of Text primitive. (#4187) (details)
- Based on comments in #4156 just remove eps. (details)
- Use mustBeConnected annotation (introduced in Modelica 3.6) for all conditional support connectors. (details)
- Proper word (details)
- Avoid having both start-value and initial equation. (details)
- Update .mailmap file (details)
- Remove call of localtime (details)
- Improve ElastoGap (details)
- - added partial massFraction to partialMedium (details)
- Update Modelica/Media/package.mo (details)
- Use spaces instead of tabs (details)
- Bump used Modelica language version to 3.6 (#4208) (details)
- A value with unit="1" should not have a time as start-value (details)
- Time events instead of state events (details)
- Replace "discrete input" by just "input" (details)
- Remove unused functions (#4061) (details)
- Update .mailmap file (details)
- Upgrade zlib to v1.2.13 (#4047) (details)
- Fix typo (#4249) (details)
- Some generic Formatting guides - consistent with how classes are usually written. (details)
- Use protected as a heading for a number of declarations. (details)
- Avoid bad line-breaks in connect-annotation. (details)
- Do not use tab. (details)
- Remove trailing white-space (details)
- The end of a class shall not be indented relative to class. (details)
- RemoveTrailingWhiteSpace (details)
- NoTab (details)
- Even for redeclare extends ensure that class contents is indented relative to class. (details)
- Indent annotation relative to class (details)
- Documentation shall be indented relative to class (details)
- And sensible formatting (details)
- Use protected as heading consistently. (details)
- Remove weird line-breaks and format equation consistently. (details)
- Add separation rule as well. (details)
- And apply the rule (details)
- Update Modelica/Electrical/Machines/Sensors/CurrentQuasiRMSSensor.mo (details)
- Apply suggestions from code review (details)
- Apply suggestions from code review (details)
- Specify how to handle modifier lists. (details)
- TrailingWhiteSpace (details)
- TrailingWhiteSpaceOnEmptyLine (details)
- Revert "Fix position prescribed friction" (details)
- Revert "Merge pull request #4255 from modelica/revert-4129-fix-friction" (details)
- Enhance a_relfric for forward/backward sliding (details)
- Fix missing simulation time (details)
- Use Vector for visualization of forces and torques (details)
- Use Vector for visualization of positions in Sensors and Joints (details)
- Use Vector for visualization (details)
- Update .mailmap file (details)
- resolves issue #4245 (details)
- Set Evaluate = true for IdealTransformer.considerMagnetization (details)
- Partially revert 18320a68b295c9b0be7a5fade0420487ec0059dc (#4252) (details)
- Add badges for regression tests run by LTX (#4212) (details)
- Make third-party licenses explicit (#4268) (details)
- Utilize PressureSlope unit in Media consistently (#4262) (details)
- Fix loss factors in SharpEdgedOrifice (#4258) (details)
- Add ModelicaDuplicateString and ModelicaDuplicateStringWithErrorReturn (new in Modelica Language Specification version 3.5) (#3686) (details)
- R_s for each ideal gas record now calculated with R_NASA (details)
- R_s for each ideal gas record now calculated with constant R_NASA_2002 (details)
- Fix dimension error of PumpCharacteristics.linearPower (#4259) (details)
- Remove `min=0` for StoichiometricCoefficient type in Units.mo (details)