Failed

tests / 06 testsuite-clang 3/3 / openmodelica_linearization.simNonlinear.mos (from (result.xml))

Failing for the past 11 builds (Since #10 )

Took 0 ms.

Stacktrace

Output mismatch (see stdout for details)

Standard Output

 + nonlinsys linearization                                                           ... equation mismatch [time: 0]

==== Log /tmp/omc-rtest-omtmpuser/openmodelica/linearization/simNonlinear.mos_temp4064/log-simNonlinear.mos
true
true
""
record SimulationResult
    resultFile = "",
    simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-6, method = 'dassl', fileNamePrefix = 'p.nonlinsys', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
    messages = "Failed to run the linearize command: p.nonlinsys"
end SimulationResult;
"[BackEnd/Initialization.mo:0:0-0:0:writable] Error: Internal error DAEUtil.getStartAttr failed because type Real has no default start value.
Error: No system for the symbolic initialization was generated
"
false
""
record SimulationResult
    resultFile = "",
    simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-6, method = 'dassl', fileNamePrefix = 'linearized_model', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
    messages = "Simulation Failed. Model: linearized_model does not exist! Please load it first before simulation."
end SimulationResult;
""
""
true
"Error: Error opening file: linearized_model.log: No such file or directory.
"
record SimulationResult
    resultFile = "",
    simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-6, method = 'dassl', fileNamePrefix = 'p.nonlinsys', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = '-l=0 -l_datarec'",
    messages = "Failed to build model: p.nonlinsys"
end SimulationResult;
"[BackEnd/Initialization.mo:0:0-0:0:writable] Error: Internal error DAEUtil.getStartAttr failed because type Real has no default start value.
Error: No system for the symbolic initialization was generated
"
false
""
record SimulationResult
    resultFile = "",
    simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-6, method = 'dassl', fileNamePrefix = 'linearized_model', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
    messages = "Simulation Failed. Model: linearized_model does not exist! Please load it first before simulation."
end SimulationResult;
""
""

Equation mismatch: diff says:
--- /tmp/omc-rtest-omtmpuser/openmodelica/linearization/simNonlinear.mos_temp4064/equations-expected2024-04-20 01:40:56.264481218 +0000
+++ /tmp/omc-rtest-omtmpuser/openmodelica/linearization/simNonlinear.mos_temp4064/equations-got2024-04-20 01:40:56.716469922 +0000
@@ -1,111 +1,40 @@
 true
 true
 ""
 record SimulationResult
-resultFile = "p.nonlinsys_res.mat",
-simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'p.nonlinsys', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = "LOG_STDOUT        | info    | Linearization will be performed at point of time: 0.000000
-LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
-LOG_SUCCESS       | info    | The simulation finished successfully.
-LOG_STDOUT        | info    | Linear model is created.
-"
+resultFile = "",
+simulationOptions = "startTime = 0.0, stopTime = 0.0, numberOfIntervals = 500, tolerance = 1e-6, method = 'dassl', fileNamePrefix = 'p.nonlinsys', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
+messages = "Failed to run the linearize command: p.nonlinsys"
 end SimulationResult;
-"Warning: The initial conditions are not fully specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\").
+"[BackEnd/Initialization.mo:0:0-0:0:writable] Error: Internal error DAEUtil.getStartAttr failed because type Real has no default start value.
+Error: No system for the symbolic initialization was generated
 "
-true
-"model linearized_model \"p_nonlinsys\"
-parameter Integer n = 3 \"number of states\";
-parameter Integer m = 1 \"number of inputs\";
-parameter Integer p = 2 \"number of outputs\";
-parameter Real x0[n] = {1, 1, 2};
-parameter Real u0[m] = {0};
-parameter Real A[n, n] = [0, 0, 0; 0, 6, -2; 0, 4, -6];
-parameter Real B[n, m] = [0; 0; 0];
-parameter Real C[p, n] = [0, 0, 0; 0, 0, 0];
-parameter Real D[p, m] = [0; 0];
-Real x[n](start = x0);
-input Real u[m](start = u0);
-output Real y[p];
-Real 'x_b1.x' = x[1];
-Real 'x_c1.x1' = x[2];
-Real 'x_c1.x2' = x[3];
-Real 'u_u1' = u[1];
-Real 'y_y1' = y[1];
-Real 'y_y2' = y[2];
-equation
-der(x) = A*x + B*u;
-y = C*x + D*u;
-end linearized_model;"
+false
+""
 record SimulationResult
-resultFile = "linearized_model_res.mat",
-simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'linearized_model', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = "LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
-LOG_SUCCESS       | info    | The simulation finished successfully.
-"
+resultFile = "",
+simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-6, method = 'dassl', fileNamePrefix = 'linearized_model', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
+messages = "Simulation Failed. Model: linearized_model does not exist! Please load it first before simulation."
 end SimulationResult;
-"Warning: The initial conditions are not fully specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\").
-"
-"LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
-LOG_SUCCESS       | info    | The simulation finished successfully.
-"
-true
 ""
-record SimulationResult
-resultFile = "p.nonlinsys_res.mat",
-simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'p.nonlinsys', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = '-l=0 -l_datarec'",
-messages = "LOG_STDOUT        | info    | Linearization will be performed at point of time: 0.000000
-LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
-LOG_SUCCESS       | info    | The simulation finished successfully.
-LOG_STDOUT        | info    | Linear model is created.
+""
+true
+"Error: Error opening file: linearized_model.log: No such file or directory.
 "
+record SimulationResult
+resultFile = "",
+simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-6, method = 'dassl', fileNamePrefix = 'p.nonlinsys', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = '-l=0 -l_datarec'",
+messages = "Failed to build model: p.nonlinsys"
 end SimulationResult;
-"Warning: The initial conditions are not fully specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\").
+"[BackEnd/Initialization.mo:0:0-0:0:writable] Error: Internal error DAEUtil.getStartAttr failed because type Real has no default start value.
+Error: No system for the symbolic initialization was generated
 "
-true
-"model linearized_model \"p_nonlinsys\"
-parameter Integer n = 3 \"number of states\";
-parameter Integer m = 1 \"number of inputs\";
-parameter Integer p = 2 \"number of outputs\";
-parameter Integer nz = 6 \"data recovery variables\";
-parameter Real x0[3] = {1, 1, 2};
-parameter Real u0[1] = {0};
-parameter Real z0[6] = {0, -6, -6, 0, 0, 0};
-parameter Real A[n, n] = [0, 0, 0; 0, 5.999999994797209, -2.000000002708405; 0, 3.999999998752807, -6.000000017010549];
-parameter Real B[n, m] = [0; 0; 0];
-parameter Real C[p, n] = [0, 0, 0; 0, 0, 0];
-parameter Real D[p, m] = [0; 0];
-parameter Real Cz[nz, n] = [0, 0, 0; 0, 9.999999993550016, -8.000000019718954; 0, 9.999999993550016, -8.000000019718954; 0, 0, 0; 0, 0, 0; 0, 0, 0];
-parameter Real Dz[nz, m] = [0; 0; 0; 1; 0; 0];
-Real x[n](start = x0);
-input Real u[m](start = u0);
-output Real y[p];
-output Real z[nz];
-Real 'x_b1.x' = x[1];
-Real 'x_c1.x1' = x[2];
-Real 'x_c1.x2' = x[3];
-Real 'u_u1' = u[1];
-Real 'y_y1' = y[1];
-Real 'y_y2' = y[2];
-Real 'z_a1.y' = z[1];
-Real 'z_c1.y' = z[2];
-Real 'z_c1.y1' = z[3];
-Real 'z_u1' = z[4];
-Real 'z_y1' = z[5];
-Real 'z_y2' = z[6];
-equation
-der(x) = A*x + B*u;
-y = C*x + D*u;
-z = Cz*x + Dz*u;
-end linearized_model;"
+false
+""
 record SimulationResult
-resultFile = "linearized_model_res.mat",
-simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'linearized_model', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
-messages = "LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
-LOG_SUCCESS       | info    | The simulation finished successfully.
-"
+resultFile = "",
+simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-6, method = 'dassl', fileNamePrefix = 'linearized_model', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
+messages = "Simulation Failed. Model: linearized_model does not exist! Please load it first before simulation."
 end SimulationResult;
-"Warning: The initial conditions are not fully specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\").
-"
-"LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
-LOG_SUCCESS       | info    | The simulation finished successfully.
-"
+""
+""

Equation mismatch: omc-diff says:
Failed 'p' '"'
Line 5: Text differs:
expected: resultFile = "p.nonlinsys_res.mat",
got:      resultFile = "",

== 1 out of 1 tests failed [openmodelica/linearization/simNonlinear.mos_temp4064, time: 0]