Failed

tests / 03 testsuite-gcc 3/3 / simulation_libraries_msl32.Modelica.Mechanics.MultiBody.Examples.Constraints.RevoluteConstraint.mos (from (result.xml))

Stacktrace

Output mismatch (see stdout for details)

Standard Output

 + Modelica.Mechanics.MultiBody.Examples.Constraints.RevoluteConstraint              ... execution failed

==== Log /tmp/omc-rtest-unknown/simulation/libraries/msl32/Modelica.Mechanics.MultiBody.Examples.Constraints.RevoluteConstraint.mos_temp1138/log-Modelica.Mechanics.MultiBody.Examples.Constraints.RevoluteConstraint.mos
"true
"
""
OpenModelicaModelTesting.Kind.VerifiedSimulation
Modelica.Mechanics.MultiBody.Examples.Constraints.RevoluteConstraint
{"bodyOfJoint.body.w_a[2]","joint.phi","freeMotionScalarInit.initAngle.angle[1]","freeMotionScalarInit.initAngle.angle[2]","freeMotionScalarInit.initAngle.angle[3]","bodyOfConstraint.body.w_a[1]","bodyOfConstraint.body.w_a[2]","bodyOfConstraint.body.w_a[3]","freeMotionScalarInit.angle_d_1","freeMotionScalarInit.angle_d_2","freeMotionScalarInit.angle_d_3"}
Simulation options: startTime = 0.0, stopTime = 10.0, numberOfIntervals = 500, tolerance = 1e-6, method = 'dassl', fileNamePrefix = 'Modelica.Mechanics.MultiBody.Examples.Constraints.RevoluteConstraint', options = '', outputFormat = 'mat', variableFilter = 'time|bodyOfJoint.body.w_a.2.|joint.phi|freeMotionScalarInit.initAngle.angle.1.|freeMotionScalarInit.initAngle.angle.2.|freeMotionScalarInit.initAngle.angle.3.|bodyOfConstraint.body.w_a.1.|bodyOfConstraint.body.w_a.2.|bodyOfConstraint.body.w_a.3.|freeMotionScalarInit.angle_d_1|freeMotionScalarInit.angle_d_2|freeMotionScalarInit.angle_d_3', cflags = '', simflags = ' -abortSlowSimulation -alarm=360 -emit_protected'
Error: Simulation did not produce a result-file
Errors: Simulation execution failed for model: Modelica.Mechanics.MultiBody.Examples.Constraints.RevoluteConstraint
LOG_STDOUT        | info    | Using sparse solver for linear system 1,
|                 | |       | because density of 0.133 remains under threshold of 0.200.
LOG_STDOUT        | info    | Using sparse solver for linear system 2,
|                 | |       | because density of 0.086 remains under threshold of 0.200.
LOG_STDOUT        | info    | Using sparse solver for linear system 3,
|                 | |       | because density of 0.130 remains under threshold of 0.200.
LOG_STDOUT        | info    | Using sparse solver for linear system 4,
|                 | |       | because density of 0.096 remains under threshold of 0.200.
LOG_STDOUT        | info    | The maximum density for using sparse solvers can be specified
|                 | |       | using the runtime flag '<-lssMaxDensity=value>'.
LOG_STDOUT        | warning | The default linear solver fails, the fallback solver with total pivoting is started at time 0.000000. That might raise performance issues, for more information use -lv LOG_LS.
LOG_STDOUT        | warning | Error solving linear system of equations (no. 3010) at time 0.000000.
LOG_STDOUT        | warning | Solving linear system 3010 fails at time 0. For more information use -lv LOG_LS.
LOG_ASSERT        | debug   | Solving linear system 3010 failed at time=0.
|                 | |       | For more information please use -lv LOG_LS.
LOG_ASSERT        | info    | simulation terminated by an assertion at initialization
Warning: The model contains alias variables with redundant start and/or conflicting nominal values. It is recommended to resolve the conflicts, because otherwise the system could be hard to solve. To print the conflicting alias sets and the chosen candidates please use -d=aliasConflicts.
[Modelica 3.2.1+maint.om/Mechanics/MultiBody/Joints.mo:260:5-270:3:writable] Warning: Variable joint.phi has attribute stateSelect=StateSelect.never, but was selected as a state


== 1 out of 1 tests failed [simulation/libraries/msl32/Modelica.Mechanics.MultiBody.Examples.Constraints.RevoluteConstraint.mos_temp1138, time: 15]