Failed
tests / 01 testsuite-gcc 1/3 / simulation_libraries_msl32.Modelica.Mechanics.MultiBody.Examples.Rotational3DEffects.GyroscopicEffects.mos (from (result.xml))
Stacktrace
Output mismatch (see stdout for details)
Standard Output
+ Modelica.Mechanics.MultiBody.Examples.Rotational3DEffects.GyroscopicEffects ... equation mismatch [time: 8] ==== Log /tmp/omc-rtest-unknown/simulation/libraries/msl32/Modelica.Mechanics.MultiBody.Examples.Rotational3DEffects.GyroscopicEffects.mos_temp8834/log-Modelica.Mechanics.MultiBody.Examples.Rotational3DEffects.GyroscopicEffects.mos "true " "" OpenModelicaModelTesting.Kind.VerifiedSimulation Modelica.Mechanics.MultiBody.Examples.Rotational3DEffects.GyroscopicEffects {"bodyCylinder2.body.frame_a.R.T[1,1]","bodyCylinder2.body.frame_a.R.T[1,2]","bodyCylinder2.body.frame_a.R.T[1,3]","bodyCylinder2.body.frame_a.R.T[2,1]","bodyCylinder2.body.frame_a.R.T[2,2]","bodyCylinder2.body.frame_a.R.T[2,3]","bodyCylinder2.body.frame_a.R.T[3,1]","bodyCylinder2.body.frame_a.R.T[3,2]","bodyCylinder2.body.frame_a.R.T[3,3]","bodyCylinder2.body.w_a[1]","bodyCylinder2.body.w_a[2]","bodyCylinder2.body.w_a[3]","revolute.phi","revolute.w","bodyCylinder3.body.frame_a.R.T[1,1]","bodyCylinder3.body.frame_a.R.T[1,2]","bodyCylinder3.body.frame_a.R.T[1,3]","bodyCylinder3.body.frame_a.R.T[2,1]","bodyCylinder3.body.frame_a.R.T[2,2]","bodyCylinder3.body.frame_a.R.T[2,3]","bodyCylinder3.body.frame_a.R.T[3,1]","bodyCylinder3.body.frame_a.R.T[3,2]","bodyCylinder3.body.frame_a.R.T[3,3]","bodyCylinder3.body.w_a[1]","bodyCylinder3.body.w_a[2]","bodyCylinder3.body.w_a[3]","rotor1D.phi","rotor1D.w"} Simulation options: startTime = 0.0, stopTime = 5.0, numberOfIntervals = 500, tolerance = 1e-8, method = 'dassl', fileNamePrefix = 'Modelica.Mechanics.MultiBody.Examples.Rotational3DEffects.GyroscopicEffects', options = '', outputFormat = 'mat', variableFilter = 'time|bodyCylinder2.body.frame_a.R.T.1,1.|bodyCylinder2.body.frame_a.R.T.1,2.|bodyCylinder2.body.frame_a.R.T.1,3.|bodyCylinder2.body.frame_a.R.T.2,1.|bodyCylinder2.body.frame_a.R.T.2,2.|bodyCylinder2.body.frame_a.R.T.2,3.|bodyCylinder2.body.frame_a.R.T.3,1.|bodyCylinder2.body.frame_a.R.T.3,2.|bodyCylinder2.body.frame_a.R.T.3,3.|bodyCylinder2.body.w_a.1.|bodyCylinder2.body.w_a.2.|bodyCylinder2.body.w_a.3.|revolute.phi|revolute.w|bodyCylinder3.body.frame_a.R.T.1,1.|bodyCylinder3.body.frame_a.R.T.1,2.|bodyCylinder3.body.frame_a.R.T.1,3.|bodyCylinder3.body.frame_a.R.T.2,1.|bodyCylinder3.body.frame_a.R.T.2,2.|bodyCylinder3.body.frame_a.R.T.2,3.|bodyCylinder3.body.frame_a.R.T.3,1.|bodyCylinder3.body.frame_a.R.T.3,2.|bodyCylinder3.body.frame_a.R.T.3,3.|bodyCylinder3.body.w_a.1.|bodyCylinder3.body.w_a.2.|bodyCylinder3.body.w_a.3.|rotor1D.phi|rotor1D.w', cflags = '', simflags = ' -abortSlowSimulation -alarm=360 -emit_protected' Result file: Modelica.Mechanics.MultiBody.Examples.Rotational3DEffects.GyroscopicEffects_res.mat Messages: LOG_STDOUT | info | Using sparse solver for linear system 1, | | | | because density of 0.070 remains under threshold of 0.200. LOG_STDOUT | info | Using sparse solver for linear system 3, | | | | because density of 0.072 remains under threshold of 0.200. LOG_STDOUT | info | Using sparse solver for linear system 5, | | | | because density of 0.085 remains under threshold of 0.200. LOG_STDOUT | info | Using sparse solver for linear system 8, | | | | because density of 0.086 remains under threshold of 0.200. LOG_STDOUT | info | The maximum density for using sparse solvers can be specified | | | | using the runtime flag '<-lssMaxDensity=value>'. LOG_SUCCESS | info | The initialization finished successfully without homotopy method. LOG_SUCCESS | info | The simulation finished successfully. Files Equal! "true " "" Equation mismatch: diff says: --- /tmp/omc-rtest-unknown/simulation/libraries/msl32/Modelica.Mechanics.MultiBody.Examples.Rotational3DEffects.GyroscopicEffects.mos_temp8834/equations-expected2024-01-13 02:53:17.572895843 +0000 +++ /tmp/omc-rtest-unknown/simulation/libraries/msl32/Modelica.Mechanics.MultiBody.Examples.Rotational3DEffects.GyroscopicEffects.mos_temp8834/equations-got2024-01-13 02:53:25.176957209 +0000 @@ -2,13 +2,23 @@ " "" OpenModelicaModelTesting.Kind.VerifiedSimulation Modelica.Mechanics.MultiBody.Examples.Rotational3DEffects.GyroscopicEffects {"bodyCylinder2.body.frame_a.R.T[1,1]","bodyCylinder2.body.frame_a.R.T[1,2]","bodyCylinder2.body.frame_a.R.T[1,3]","bodyCylinder2.body.frame_a.R.T[2,1]","bodyCylinder2.body.frame_a.R.T[2,2]","bodyCylinder2.body.frame_a.R.T[2,3]","bodyCylinder2.body.frame_a.R.T[3,1]","bodyCylinder2.body.frame_a.R.T[3,2]","bodyCylinder2.body.frame_a.R.T[3,3]","bodyCylinder2.body.w_a[1]","bodyCylinder2.body.w_a[2]","bodyCylinder2.body.w_a[3]","revolute.phi","revolute.w","bodyCylinder3.body.frame_a.R.T[1,1]","bodyCylinder3.body.frame_a.R.T[1,2]","bodyCylinder3.body.frame_a.R.T[1,3]","bodyCylinder3.body.frame_a.R.T[2,1]","bodyCylinder3.body.frame_a.R.T[2,2]","bodyCylinder3.body.frame_a.R.T[2,3]","bodyCylinder3.body.frame_a.R.T[3,1]","bodyCylinder3.body.frame_a.R.T[3,2]","bodyCylinder3.body.frame_a.R.T[3,3]","bodyCylinder3.body.w_a[1]","bodyCylinder3.body.w_a[2]","bodyCylinder3.body.w_a[3]","rotor1D.phi","rotor1D.w"} -Simulation options: startTime = 0.0, stopTime = 5.0, numberOfIntervals = 500, tolerance = 1e-08, method = 'dassl', fileNamePrefix = 'Modelica.Mechanics.MultiBody.Examples.Rotational3DEffects.GyroscopicEffects', options = '', outputFormat = 'mat', variableFilter = 'time|bodyCylinder2.body.frame_a.R.T.1,1.|bodyCylinder2.body.frame_a.R.T.1,2.|bodyCylinder2.body.frame_a.R.T.1,3.|bodyCylinder2.body.frame_a.R.T.2,1.|bodyCylinder2.body.frame_a.R.T.2,2.|bodyCylinder2.body.frame_a.R.T.2,3.|bodyCylinder2.body.frame_a.R.T.3,1.|bodyCylinder2.body.frame_a.R.T.3,2.|bodyCylinder2.body.frame_a.R.T.3,3.|bodyCylinder2.body.w_a.1.|bodyCylinder2.body.w_a.2.|bodyCylinder2.body.w_a.3.|revolute.phi|revolute.w|bodyCylinder3.body.frame_a.R.T.1,1.|bodyCylinder3.body.frame_a.R.T.1,2.|bodyCylinder3.body.frame_a.R.T.1,3.|bodyCylinder3.body.frame_a.R.T.2,1.|bodyCylinder3.body.frame_a.R.T.2,2.|bodyCylinder3.body.frame_a.R.T.2,3.|bodyCylinder3.body.frame_a.R.T.3,1.|bodyCylinder3.body.frame_a.R.T.3,2.|bodyCylinder3.body.frame_a.R.T.3,3.|bodyCylinder3.body.w_a.1.|bodyCylinder3.body.w_a.2.|bodyCylinder3.body.w_a.3.|rotor1D.phi|rotor1D.w', cflags = '', simflags = ' -abortSlowSimulation -alarm=360 -emit_protected' +Simulation options: startTime = 0.0, stopTime = 5.0, numberOfIntervals = 500, tolerance = 1e-8, method = 'dassl', fileNamePrefix = 'Modelica.Mechanics.MultiBody.Examples.Rotational3DEffects.GyroscopicEffects', options = '', outputFormat = 'mat', variableFilter = 'time|bodyCylinder2.body.frame_a.R.T.1,1.|bodyCylinder2.body.frame_a.R.T.1,2.|bodyCylinder2.body.frame_a.R.T.1,3.|bodyCylinder2.body.frame_a.R.T.2,1.|bodyCylinder2.body.frame_a.R.T.2,2.|bodyCylinder2.body.frame_a.R.T.2,3.|bodyCylinder2.body.frame_a.R.T.3,1.|bodyCylinder2.body.frame_a.R.T.3,2.|bodyCylinder2.body.frame_a.R.T.3,3.|bodyCylinder2.body.w_a.1.|bodyCylinder2.body.w_a.2.|bodyCylinder2.body.w_a.3.|revolute.phi|revolute.w|bodyCylinder3.body.frame_a.R.T.1,1.|bodyCylinder3.body.frame_a.R.T.1,2.|bodyCylinder3.body.frame_a.R.T.1,3.|bodyCylinder3.body.frame_a.R.T.2,1.|bodyCylinder3.body.frame_a.R.T.2,2.|bodyCylinder3.body.frame_a.R.T.2,3.|bodyCylinder3.body.frame_a.R.T.3,1.|bodyCylinder3.body.frame_a.R.T.3,2.|bodyCylinder3.body.frame_a.R.T.3,3.|bodyCylinder3.body.w_a.1.|bodyCylinder3.body.w_a.2.|bodyCylinder3.body.w_a.3.|rotor1D.phi|rotor1D.w', cflags = '', simflags = ' -abortSlowSimulation -alarm=360 -emit_protected' Result file: Modelica.Mechanics.MultiBody.Examples.Rotational3DEffects.GyroscopicEffects_res.mat -Messages: LOG_SUCCESS | info | The initialization finished successfully without homotopy method. +Messages: LOG_STDOUT | info | Using sparse solver for linear system 1, +| | | | because density of 0.070 remains under threshold of 0.200. +LOG_STDOUT | info | Using sparse solver for linear system 3, +| | | | because density of 0.072 remains under threshold of 0.200. +LOG_STDOUT | info | Using sparse solver for linear system 5, +| | | | because density of 0.085 remains under threshold of 0.200. +LOG_STDOUT | info | Using sparse solver for linear system 8, +| | | | because density of 0.086 remains under threshold of 0.200. +LOG_STDOUT | info | The maximum density for using sparse solvers can be specified +| | | | using the runtime flag '<-lssMaxDensity=value>'. +LOG_SUCCESS | info | The initialization finished successfully without homotopy method. LOG_SUCCESS | info | The simulation finished successfully. Files Equal! "true " Equation mismatch: omc-diff says: Failed 'U' 'T' Line 9: Text differs: expected: Messages: LOG_SUCCESS | info | The initialization finished successfully without homotopy method. got: Messages: LOG_STDOUT | info | Using sparse solver for linear system == 1 out of 1 tests failed [simulation/libraries/msl32/Modelica.Mechanics.MultiBody.Examples.Rotational3DEffects.GyroscopicEffects.mos_temp8834, time: 8]