Failed
tests / 06 testsuite-clang 3/3 / simulation_modelica_initialization.homotopy4_solver.mos (from (result.xml))
Stacktrace
Output mismatch (see stdout for details)
Standard Output
+ homotopy4_solver ... equation mismatch [time: 17] ==== Log /tmp/omc-rtest-unknown/simulation/modelica/initialization/homotopy4_solver.mos_temp2385/log-homotopy4_solver.mos true "" true "" {"initializationTests.homotopy4_solver","initializationTests.homotopy4_solver_init.xml"} "Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac0. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac1. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). " 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Try to solve nonlinear initial system 0 without homotopy first. LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [2] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [3] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [4] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [5] Real e(start=0, nominal=1) = 0.956376 (pre: 0) | | | | | | [6] Real f(start=0, nominal=1) = -17.3731 (pre: 0) | | | | | | [7] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [8] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [10] Real x3(start=0, nominal=1) = -5.04362 (pre: 0) | | | | | | [11] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [12] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [13] Real y2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [14] Real y3(start=0, nominal=1) = 4.95638 (pre: 0) | | | | | | [15] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [16] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [17] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [18] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully without homotopy method. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Local homotopy with equidistant step size started for nonlinear system 0. LOG_INIT_HOMOTOPY | info | The homotopy path of system 0 will be exported to initializationTests.homotopy4_solver_nonlinsys0_equidistant_local_homotopy.csv. LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.333333 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.333333 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.666667 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.666667 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 1 done | | | | --------------------------- LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [2] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [3] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [4] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [5] Real e(start=0, nominal=1) = 0.57364 (pre: 0) | | | | | | [6] Real f(start=0, nominal=1) = -27.1705 (pre: 0) | | | | | | [7] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [8] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [10] Real x3(start=0, nominal=1) = -5.42636 (pre: 0) | | | | | | [11] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [12] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [13] Real y2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [14] Real y3(start=0, nominal=1) = 4.57364 (pre: 0) | | | | | | [15] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [16] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [17] Real z2(start=0, nominal=1) = 4.67544 (pre: 0) | | | | | | [18] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 3 local homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Try to solve nonlinear initial system 0 without homotopy first. LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [2] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [3] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [4] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [5] Real e(start=0, nominal=1) = 0.57364 (pre: 0) | | | | | | [6] Real f(start=0, nominal=1) = -27.1705 (pre: 0) | | | | | | [7] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [8] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [10] Real x3(start=0, nominal=1) = -5.42636 (pre: 0) | | | | | | [11] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [12] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [13] Real y2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [14] Real y3(start=0, nominal=1) = 4.57364 (pre: 0) | | | | | | [15] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [16] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [17] Real z2(start=0, nominal=1) = 4.67544 (pre: 0) | | | | | | [18] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully without homotopy method. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Local homotopy with equidistant step size started for nonlinear system 0. LOG_INIT_HOMOTOPY | info | The homotopy path of system 0 will be exported to initializationTests.homotopy4_solver_nonlinsys0_equidistant_local_homotopy.csv. LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.333333 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.333333 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.666667 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.666667 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 1 done | | | | --------------------------- LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [2] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [3] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [4] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [5] Real e(start=0, nominal=1) = -0.956376 (pre: 0) | | | | | | [6] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [7] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [8] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [10] Real x3(start=0, nominal=1) = -6.95638 (pre: 0) | | | | | | [11] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [12] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [13] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [14] Real y3(start=0, nominal=1) = 3.04362 (pre: 0) | | | | | | [15] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [16] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [17] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [18] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 3 local homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Try to solve nonlinear initial system 0 without homotopy first. LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [2] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [3] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [4] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [5] Real e(start=0, nominal=1) = -0.956373 (pre: 0) | | | | | | [6] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [7] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [8] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [10] Real x3(start=0, nominal=1) = -6.95637 (pre: 0) | | | | | | [11] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [12] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [13] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [14] Real y3(start=0, nominal=1) = 3.04363 (pre: 0) | | | | | | [15] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [16] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [17] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [18] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully without homotopy method. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Local homotopy with equidistant step size started for nonlinear system 0. LOG_INIT_HOMOTOPY | info | The homotopy path of system 0 will be exported to initializationTests.homotopy4_solver_nonlinsys0_equidistant_local_homotopy.csv. LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.333333 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.333333 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.666667 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.666667 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 1 done | | | | --------------------------- LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [2] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [3] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [4] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [5] Real e(start=0, nominal=1) = -0.956366 (pre: 0) | | | | | | [6] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [7] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [8] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [10] Real x3(start=0, nominal=1) = -6.95637 (pre: 0) | | | | | | [11] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [12] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [13] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [14] Real y3(start=0, nominal=1) = 3.04363 (pre: 0) | | | | | | [15] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [16] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [17] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [18] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 3 local homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Try to solve nonlinear initial system 0 without homotopy first. LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [2] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [3] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [4] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [5] Real e(start=0, nominal=1) = 0.57364 (pre: 0) | | | | | | [6] Real f(start=0, nominal=1) = -27.1705 (pre: 0) | | | | | | [7] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [8] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [10] Real x3(start=0, nominal=1) = -5.42636 (pre: 0) | | | | | | [11] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [12] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [13] Real y2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [14] Real y3(start=0, nominal=1) = 4.57364 (pre: 0) | | | | | | [15] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [16] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [17] Real z2(start=0, nominal=1) = 4.67544 (pre: 0) | | | | | | [18] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully without homotopy method. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Local homotopy with equidistant step size started for nonlinear system 0. LOG_INIT_HOMOTOPY | info | The homotopy path of system 0 will be exported to initializationTests.homotopy4_solver_nonlinsys0_equidistant_local_homotopy.csv. LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.333333 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.333333 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.666667 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.666667 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 1 done | | | | --------------------------- LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [2] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [3] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [4] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [5] Real e(start=0, nominal=1) = -0.956376 (pre: 0) | | | | | | [6] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [7] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [8] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [10] Real x3(start=0, nominal=1) = -6.95638 (pre: 0) | | | | | | [11] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [12] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [13] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [14] Real y3(start=0, nominal=1) = 3.04362 (pre: 0) | | | | | | [15] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [16] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [17] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [18] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 3 local homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Try to solve nonlinear initial system 0 without homotopy first. LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [2] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [3] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [4] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [5] Real e(start=0, nominal=1) = 0.57364 (pre: 0) | | | | | | [6] Real f(start=0, nominal=1) = -27.1705 (pre: 0) | | | | | | [7] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [8] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [10] Real x3(start=0, nominal=1) = -5.42636 (pre: 0) | | | | | | [11] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [12] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [13] Real y2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [14] Real y3(start=0, nominal=1) = 4.57364 (pre: 0) | | | | | | [15] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [16] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [17] Real z2(start=0, nominal=1) = 4.67544 (pre: 0) | | | | | | [18] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully without homotopy method. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Local homotopy with equidistant step size started for nonlinear system 0. LOG_INIT_HOMOTOPY | info | The homotopy path of system 0 will be exported to initializationTests.homotopy4_solver_nonlinsys0_equidistant_local_homotopy.csv. LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.333333 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.333333 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.666667 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 0.666667 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | [system 0] homotopy parameter lambda = 1 done | | | | --------------------------- LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [2] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [3] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [4] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [5] Real e(start=0, nominal=1) = -0.956376 (pre: 0) | | | | | | [6] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [7] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [8] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [10] Real x3(start=0, nominal=1) = -6.95638 (pre: 0) | | | | | | [11] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [12] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [13] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [14] Real y3(start=0, nominal=1) = 3.04362 (pre: 0) | | | | | | [15] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [16] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [17] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [18] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 3 local homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true true "" {"initializationTests.homotopy4_solver","initializationTests.homotopy4_solver_init.xml"} "Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac4. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac5. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac6. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). " 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Model contains homotopy operator: Use adaptive homotopy method to solve initialization problem. To disable initialization with homotopy operator use \"-noHomotopyOnFirstTry\". LOG_INIT_HOMOTOPY | info | Global homotopy with equidistant step size started. LOG_INIT_HOMOTOPY | info | The homotopy path will be exported to initializationTests.homotopy4_solver_equidistant_global_homotopy.csv. LOG_INIT_HOMOTOPY | info | homotopy process | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.333333 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.333333 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.666667 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.666667 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 done | | | | --------------------------- LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [2] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [3] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [4] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [5] Real e(start=0, nominal=1) = 0.57364 (pre: 0) | | | | | | [6] Real f(start=0, nominal=1) = -27.1705 (pre: 0) | | | | | | [7] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [8] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [10] Real x3(start=0, nominal=1) = -5.42636 (pre: 0) | | | | | | [11] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [12] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [13] Real y2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [14] Real y3(start=0, nominal=1) = 4.57364 (pre: 0) | | | | | | [15] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [16] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [17] Real z2(start=0, nominal=1) = 4.67544 (pre: 0) | | | | | | [18] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 3 homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Global homotopy with equidistant step size started. LOG_INIT_HOMOTOPY | info | The homotopy path will be exported to initializationTests.homotopy4_solver_equidistant_global_homotopy.csv. LOG_INIT_HOMOTOPY | info | homotopy process | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.333333 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.333333 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.666667 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.666667 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 done | | | | --------------------------- LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [2] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [3] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [4] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [5] Real e(start=0, nominal=1) = 0.57364 (pre: 0) | | | | | | [6] Real f(start=0, nominal=1) = -27.1705 (pre: 0) | | | | | | [7] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [8] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [10] Real x3(start=0, nominal=1) = -5.42636 (pre: 0) | | | | | | [11] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [12] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [13] Real y2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [14] Real y3(start=0, nominal=1) = 4.57364 (pre: 0) | | | | | | [15] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [16] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [17] Real z2(start=0, nominal=1) = 4.67544 (pre: 0) | | | | | | [18] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 3 homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Model contains homotopy operator: Use adaptive homotopy method to solve initialization problem. To disable initialization with homotopy operator use \"-noHomotopyOnFirstTry\". LOG_INIT_HOMOTOPY | info | Global homotopy with equidistant step size started. LOG_INIT_HOMOTOPY | info | The homotopy path will be exported to initializationTests.homotopy4_solver_equidistant_global_homotopy.csv. LOG_INIT_HOMOTOPY | info | homotopy process | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.333333 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.333333 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.666667 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.666667 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 done | | | | --------------------------- LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [2] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [3] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [4] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [5] Real e(start=0, nominal=1) = -0.956376 (pre: 0) | | | | | | [6] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [7] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [8] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [10] Real x3(start=0, nominal=1) = -6.95638 (pre: 0) | | | | | | [11] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [12] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [13] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [14] Real y3(start=0, nominal=1) = 3.04362 (pre: 0) | | | | | | [15] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [16] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [17] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [18] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 3 homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Global homotopy with equidistant step size started. LOG_INIT_HOMOTOPY | info | The homotopy path will be exported to initializationTests.homotopy4_solver_equidistant_global_homotopy.csv. LOG_INIT_HOMOTOPY | info | homotopy process | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.333333 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.333333 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.666667 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.666667 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 done | | | | --------------------------- LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [2] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [3] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [4] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [5] Real e(start=0, nominal=1) = -0.956376 (pre: 0) | | | | | | [6] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [7] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [8] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [10] Real x3(start=0, nominal=1) = -6.95638 (pre: 0) | | | | | | [11] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [12] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [13] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [14] Real y3(start=0, nominal=1) = 3.04362 (pre: 0) | | | | | | [15] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [16] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [17] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [18] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 3 homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Model contains homotopy operator: Use adaptive homotopy method to solve initialization problem. To disable initialization with homotopy operator use \"-noHomotopyOnFirstTry\". LOG_INIT_HOMOTOPY | info | Global homotopy with equidistant step size started. LOG_INIT_HOMOTOPY | info | The homotopy path will be exported to initializationTests.homotopy4_solver_equidistant_global_homotopy.csv. LOG_INIT_HOMOTOPY | info | homotopy process | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.333333 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.333333 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.666667 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.666667 done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 done | | | | --------------------------- LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [2] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [3] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [4] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [5] Real e(start=0, nominal=1) = -0.956366 (pre: 0) | | | | | | [6] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [7] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [8] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [10] Real x3(start=0, nominal=1) = -6.95637 (pre: 0) | | | | | | [11] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [12] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [13] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [14] Real y3(start=0, nominal=1) = 3.04363 (pre: 0) | | | | | | [15] Real z(start=0, nominal=1) = -5 (pre: 0) | ...[truncated 55643 chars]... otopy parameter lambda = 0.538547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.578547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.618547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.698547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.778547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.858547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | Total number of lambda steps for this homotopy loop: 14 LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real __HOM_LAMBDA(start=0, nominal=1) = 0 (pre: 0) | | | | | | [2] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [3] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [4] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [5] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [6] Real e(start=0, nominal=1) = -0.956376 (pre: 0) | | | | | | [7] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [8] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [10] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [11] Real x3(start=0, nominal=1) = -6.95638 (pre: 0) | | | | | | [12] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [13] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [14] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [15] Real y3(start=0, nominal=1) = 3.04362 (pre: 0) | | | | | | [16] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [17] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [18] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [19] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 14 local homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true true "" {"initializationTests.homotopy4_solver","initializationTests.homotopy4_solver_init.xml"} "Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac13. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac14. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). " 0 "" "LOG_STDOUT | warning | Sparsity pattern for non-linear system 0 is not regular. This indicates that something went wrong during sparsity pattern generation. Removing sparsity pattern and disabling NLS scaling. LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Try to solve the initialization problem without homotopy first. LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real __HOM_LAMBDA(start=0, nominal=1) = 0 (pre: 0) | | | | | | [2] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [3] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [4] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [5] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [6] Real e(start=0, nominal=1) = 0.956376 (pre: 0) | | | | | | [7] Real f(start=0, nominal=1) = -17.3731 (pre: 0) | | | | | | [8] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [10] Real x2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [11] Real x3(start=0, nominal=1) = -5.04362 (pre: 0) | | | | | | [12] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [13] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [14] Real y2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [15] Real y3(start=0, nominal=1) = 4.95638 (pre: 0) | | | | | | [16] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [17] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [18] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [19] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully without homotopy method. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_STDOUT | warning | Sparsity pattern for non-linear system 0 is not regular. This indicates that something went wrong during sparsity pattern generation. Removing sparsity pattern and disabling NLS scaling. LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Global homotopy with adaptive step size started. LOG_INIT_HOMOTOPY | info | homotopy process | | | | --------------------------- LOG_INIT_HOMOTOPY | info | solve simplified lambda0-DAE LOG_INIT_HOMOTOPY | info | solving simplified lambda0-DAE done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | run along the homotopy path and solve the actual system LOG_INIT_HOMOTOPY | info | Homotopy run: 1 LOG_INIT_HOMOTOPY | info | startDirection = 1.0000000000e+00 LOG_INIT_HOMOTOPY | info | The homotopy path will be exported to initializationTests.homotopy4_solver_nonlinsys0_adaptive_global_homotopy_pos.csv. LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.0287318 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.298547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.298547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.338547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.378547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.418547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.458547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.498547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.538547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.578547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.658547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.738547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.818547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.978547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | Total number of lambda steps for this homotopy loop: 14 LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real __HOM_LAMBDA(start=0, nominal=1) = 0 (pre: 0) | | | | | | [2] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [3] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [4] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [5] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [6] Real e(start=0, nominal=1) = -0.956376 (pre: 0) | | | | | | [7] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [8] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [10] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [11] Real x3(start=0, nominal=1) = -6.95638 (pre: 0) | | | | | | [12] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [13] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [14] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [15] Real y3(start=0, nominal=1) = 3.04362 (pre: 0) | | | | | | [16] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [17] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [18] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [19] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 14 homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_STDOUT | warning | Sparsity pattern for non-linear system 0 is not regular. This indicates that something went wrong during sparsity pattern generation. Removing sparsity pattern and disabling NLS scaling. LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Automatically set -homotopyOnFirstTry, because trying without homotopy first is not supported for the adaptive global approach in combination with KINSOL. LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT_HOMOTOPY | info | Global homotopy with adaptive step size started. LOG_INIT_HOMOTOPY | info | homotopy process | | | | --------------------------- LOG_INIT_HOMOTOPY | info | solve simplified lambda0-DAE LOG_INIT_HOMOTOPY | info | solving simplified lambda0-DAE done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | run along the homotopy path and solve the actual system LOG_INIT_HOMOTOPY | info | Homotopy run: 1 LOG_INIT_HOMOTOPY | info | startDirection = 1.0000000000e+00 LOG_INIT_HOMOTOPY | info | The homotopy path will be exported to initializationTests.homotopy4_solver_nonlinsys0_adaptive_global_homotopy_pos.csv. LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.0287318 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.298547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.298547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.338547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.378547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.418547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.458547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.498547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.538547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.578547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.658547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.738547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.818547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.978547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | Total number of lambda steps for this homotopy loop: 14 LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real __HOM_LAMBDA(start=0, nominal=1) = 0 (pre: 0) | | | | | | [2] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [3] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [4] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [5] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [6] Real e(start=0, nominal=1) = -0.956376 (pre: 0) | | | | | | [7] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [8] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [10] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [11] Real x3(start=0, nominal=1) = -6.95638 (pre: 0) | | | | | | [12] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [13] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [14] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [15] Real y3(start=0, nominal=1) = 3.04362 (pre: 0) | | | | | | [16] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [17] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [18] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [19] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 14 homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_STDOUT | warning | Sparsity pattern for non-linear system 0 is not regular. This indicates that something went wrong during sparsity pattern generation. Removing sparsity pattern and disabling NLS scaling. LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Global homotopy with adaptive step size started. LOG_INIT_HOMOTOPY | info | homotopy process | | | | --------------------------- LOG_INIT_HOMOTOPY | info | solve simplified lambda0-DAE LOG_INIT_HOMOTOPY | info | solving simplified lambda0-DAE done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | run along the homotopy path and solve the actual system LOG_INIT_HOMOTOPY | info | Homotopy run: 1 LOG_INIT_HOMOTOPY | info | startDirection = 1.0000000000e+00 LOG_INIT_HOMOTOPY | info | The homotopy path will be exported to initializationTests.homotopy4_solver_nonlinsys0_adaptive_global_homotopy_pos.csv. LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.0287318 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.298547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.298547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.338547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.378547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.418547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.458547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.498547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.538547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.578547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.658547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.738547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.818547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.978547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | Total number of lambda steps for this homotopy loop: 14 LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real __HOM_LAMBDA(start=0, nominal=1) = 0 (pre: 0) | | | | | | [2] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [3] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [4] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [5] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [6] Real e(start=0, nominal=1) = -0.956376 (pre: 0) | | | | | | [7] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [8] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [10] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [11] Real x3(start=0, nominal=1) = -6.95638 (pre: 0) | | | | | | [12] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [13] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [14] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [15] Real y3(start=0, nominal=1) = 3.04362 (pre: 0) | | | | | | [16] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [17] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [18] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [19] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 14 homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_STDOUT | warning | Sparsity pattern for non-linear system 0 is not regular. This indicates that something went wrong during sparsity pattern generation. Removing sparsity pattern and disabling NLS scaling. LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Try to solve the initialization problem without homotopy first. LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real __HOM_LAMBDA(start=0, nominal=1) = 0 (pre: 0) | | | | | | [2] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [3] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [4] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [5] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [6] Real e(start=0, nominal=1) = -0.956376 (pre: 0) | | | | | | [7] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [8] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [10] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [11] Real x3(start=0, nominal=1) = -6.95638 (pre: 0) | | | | | | [12] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [13] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [14] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [15] Real y3(start=0, nominal=1) = 3.04362 (pre: 0) | | | | | | [16] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [17] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [18] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [19] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully without homotopy method. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_STDOUT | warning | Sparsity pattern for non-linear system 0 is not regular. This indicates that something went wrong during sparsity pattern generation. Removing sparsity pattern and disabling NLS scaling. LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Global homotopy with adaptive step size started. LOG_INIT_HOMOTOPY | info | homotopy process | | | | --------------------------- LOG_INIT_HOMOTOPY | info | solve simplified lambda0-DAE LOG_INIT_HOMOTOPY | info | solving simplified lambda0-DAE done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | run along the homotopy path and solve the actual system LOG_INIT_HOMOTOPY | info | Homotopy run: 1 LOG_INIT_HOMOTOPY | info | startDirection = 1.0000000000e+00 LOG_INIT_HOMOTOPY | info | The homotopy path will be exported to initializationTests.homotopy4_solver_nonlinsys0_adaptive_global_homotopy_pos.csv. LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.0287318 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.298547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.298547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.338547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.378547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.418547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.458547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.498547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.538547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.578547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.658547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.738547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.818547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.978547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | Total number of lambda steps for this homotopy loop: 14 LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real __HOM_LAMBDA(start=0, nominal=1) = 0 (pre: 0) | | | | | | [2] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [3] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [4] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [5] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [6] Real e(start=0, nominal=1) = -0.956376 (pre: 0) | | | | | | [7] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [8] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [10] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [11] Real x3(start=0, nominal=1) = -6.95638 (pre: 0) | | | | | | [12] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [13] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [14] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [15] Real y3(start=0, nominal=1) = 3.04362 (pre: 0) | | | | | | [16] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [17] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [18] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [19] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 14 homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_STDOUT | warning | Sparsity pattern for non-linear system 0 is not regular. This indicates that something went wrong during sparsity pattern generation. Removing sparsity pattern and disabling NLS scaling. LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Try to solve the initialization problem without homotopy first. LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real __HOM_LAMBDA(start=0, nominal=1) = 0 (pre: 0) | | | | | | [2] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [3] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [4] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [5] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [6] Real e(start=0, nominal=1) = 0.57364 (pre: 0) | | | | | | [7] Real f(start=0, nominal=1) = -27.1705 (pre: 0) | | | | | | [8] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [10] Real x2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [11] Real x3(start=0, nominal=1) = -5.42636 (pre: 0) | | | | | | [12] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [13] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [14] Real y2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [15] Real y3(start=0, nominal=1) = 4.57364 (pre: 0) | | | | | | [16] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [17] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [18] Real z2(start=0, nominal=1) = 4.67544 (pre: 0) | | | | | | [19] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully without homotopy method. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_STDOUT | warning | Sparsity pattern for non-linear system 0 is not regular. This indicates that something went wrong during sparsity pattern generation. Removing sparsity pattern and disabling NLS scaling. LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Global homotopy with adaptive step size started. LOG_INIT_HOMOTOPY | info | homotopy process | | | | --------------------------- LOG_INIT_HOMOTOPY | info | solve simplified lambda0-DAE LOG_INIT_HOMOTOPY | info | solving simplified lambda0-DAE done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | run along the homotopy path and solve the actual system LOG_INIT_HOMOTOPY | info | Homotopy run: 1 LOG_INIT_HOMOTOPY | info | startDirection = 1.0000000000e+00 LOG_INIT_HOMOTOPY | info | The homotopy path will be exported to initializationTests.homotopy4_solver_nonlinsys0_adaptive_global_homotopy_pos.csv. LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.0287318 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.298547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.298547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.338547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.378547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.418547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.458547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.498547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.538547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.578547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.658547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.738547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.818547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.978547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | Total number of lambda steps for this homotopy loop: 14 LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real __HOM_LAMBDA(start=0, nominal=1) = 0 (pre: 0) | | | | | | [2] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [3] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [4] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [5] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [6] Real e(start=0, nominal=1) = -0.956376 (pre: 0) | | | | | | [7] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [8] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [10] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [11] Real x3(start=0, nominal=1) = -6.95638 (pre: 0) | | | | | | [12] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [13] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [14] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [15] Real y3(start=0, nominal=1) = 3.04362 (pre: 0) | | | | | | [16] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [17] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [18] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [19] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 14 homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_STDOUT | warning | Sparsity pattern for non-linear system 0 is not regular. This indicates that something went wrong during sparsity pattern generation. Removing sparsity pattern and disabling NLS scaling. LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Try to solve the initialization problem without homotopy first. LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real __HOM_LAMBDA(start=0, nominal=1) = 0 (pre: 0) | | | | | | [2] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [3] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [4] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [5] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [6] Real e(start=0, nominal=1) = 0.57364 (pre: 0) | | | | | | [7] Real f(start=0, nominal=1) = -27.1705 (pre: 0) | | | | | | [8] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [10] Real x2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [11] Real x3(start=0, nominal=1) = -5.42636 (pre: 0) | | | | | | [12] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [13] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [14] Real y2(start=0, nominal=1) = -2.16228 (pre: 0) | | | | | | [15] Real y3(start=0, nominal=1) = 4.57364 (pre: 0) | | | | | | [16] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [17] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [18] Real z2(start=0, nominal=1) = 4.67544 (pre: 0) | | | | | | [19] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully without homotopy method. LOG_SUCCESS | info | The simulation finished successfully. " true 0 "" "LOG_STDOUT | warning | Sparsity pattern for non-linear system 0 is not regular. This indicates that something went wrong during sparsity pattern generation. Removing sparsity pattern and disabling NLS scaling. LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values LOG_INIT | info | updating max-values LOG_INIT | info | updating nominal-values LOG_INIT | info | updating primary start-values LOG_INIT | info | initialization method: symbolic [solves the initialization problem symbolically - default] LOG_INIT_HOMOTOPY | info | Global homotopy with adaptive step size started. LOG_INIT_HOMOTOPY | info | homotopy process | | | | --------------------------- LOG_INIT_HOMOTOPY | info | solve simplified lambda0-DAE LOG_INIT_HOMOTOPY | info | solving simplified lambda0-DAE done | | | | --------------------------- LOG_INIT_HOMOTOPY | info | run along the homotopy path and solve the actual system LOG_INIT_HOMOTOPY | info | Homotopy run: 1 LOG_INIT_HOMOTOPY | info | startDirection = 1.0000000000e+00 LOG_INIT_HOMOTOPY | info | The homotopy path will be exported to initializationTests.homotopy4_solver_nonlinsys0_adaptive_global_homotopy_pos.csv. LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.0287318 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.298547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.298547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.338547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.378547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.418547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.458547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.498547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.538547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.578547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.658547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.738547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.818547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 0.978547 LOG_INIT_HOMOTOPY | info | homotopy parameter lambda = 1 LOG_INIT_HOMOTOPY | info | Total number of lambda steps for this homotopy loop: 14 LOG_INIT_V | info | parameter values | | | | | real parameters | | | | | | [1] parameter Real p1(start=10, fixed=true) = 10 LOG_SOTI | info | ### SOLUTION OF THE INITIALIZATION ### | | | | | other real variables | | | | | | [1] Real __HOM_LAMBDA(start=0, nominal=1) = 0 (pre: 0) | | | | | | [2] Real a(start=0, nominal=1) = 1 (pre: 0) | | | | | | [3] Real b(start=0, nominal=1) = -0.412118 (pre: 0) | | | | | | [4] Real c(start=0, nominal=1) = 0.169842 (pre: 0) | | | | | | [5] Real d(start=0, nominal=1) = -9 (pre: 0) | | | | | | [6] Real e(start=0, nominal=1) = -0.956376 (pre: 0) | | | | | | [7] Real f(start=0, nominal=1) = -23.1114 (pre: 0) | | | | | | [8] Real x(start=0, nominal=1) = -9 (pre: 0) | | | | | | [9] Real x1(start=0, nominal=1) = -9 (pre: 0) | | | | | | [10] Real x2(start=0, nominal=1) = 3 (pre: 0) | | | | | | [11] Real x3(start=0, nominal=1) = -6.95638 (pre: 0) | | | | | | [12] Real y(start=0, nominal=1) = 5 (pre: 0) | | | | | | [13] Real y1(start=0, nominal=1) = 4.16984 (pre: 0) | | | | | | [14] Real y2(start=0, nominal=1) = -3 (pre: 0) | | | | | | [15] Real y3(start=0, nominal=1) = 3.04362 (pre: 0) | | | | | | [16] Real z(start=0, nominal=1) = -5 (pre: 0) | | | | | | [17] Real z1(start=0, nominal=1) = -4.16984 (pre: 0) | | | | | | [18] Real z2(start=0, nominal=1) = 9 (pre: 0) | | | | | | [19] Real z3(start=0, nominal=1) = -1 (pre: 0) LOG_INIT | info | ### END INITIALIZATION ### LOG_SUCCESS | info | The initialization finished successfully with 14 homotopy steps. LOG_SUCCESS | info | The simulation finished successfully. " true Equation mismatch: diff says: --- /tmp/omc-rtest-unknown/simulation/modelica/initialization/homotopy4_solver.mos_temp2385/equations-expected2024-01-13 02:56:07.754572607 +0000 +++ /tmp/omc-rtest-unknown/simulation/modelica/initialization/homotopy4_solver.mos_temp2385/equations-got2024-01-13 02:56:24.254919040 +0000 @@ -1,12 +1,12 @@ true "" true "" {"initializationTests.homotopy4_solver","initializationTests.homotopy4_solver_init.xml"} -"Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac2. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). -Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac3. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). +"Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac0. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). +Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac1. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). " 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values @@ -442,13 +442,13 @@ " true true "" {"initializationTests.homotopy4_solver","initializationTests.homotopy4_solver_init.xml"} -"Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac10. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). -Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac11. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). -Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac14. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). +"Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac4. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). +Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac5. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). +Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac6. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). " 0 "" "LOG_INIT | info | ### START INITIALIZATION ### LOG_INIT | info | updating min-values @@ -974,12 +974,12 @@ " true true "" {"initializationTests.homotopy4_solver","initializationTests.homotopy4_solver_init.xml"} -"Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac21. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). -Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac22. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). +"Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac9. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). +Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac10. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). " 0 "" "LOG_STDOUT | warning | Sparsity pattern for non-linear system 0 is not regular. This indicates that something went wrong during sparsity pattern generation. Removing sparsity pattern and disabling NLS scaling. LOG_INIT | info | ### START INITIALIZATION ### @@ -1527,12 +1527,12 @@ " true true "" {"initializationTests.homotopy4_solver","initializationTests.homotopy4_solver_init.xml"} -"Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac28. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). -Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac31. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). +"Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac13. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). +Warning: There are nonlinear iteration variables with default zero start attribute found in NLSJac14. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->Show additional information from the initialization process, in OMNotebook call setCommandLineOptions(\"-d=initialization\"). " 0 "" "LOG_STDOUT | warning | Sparsity pattern for non-linear system 0 is not regular. This indicates that something went wrong during sparsity pattern generation. Removing sparsity pattern and disabling NLS scaling. LOG_INIT | info | ### START INITIALIZATION ### Equation mismatch: omc-diff says: Line 6: Integer 2 != 0 == 1 out of 1 tests failed [simulation/modelica/initialization/homotopy4_solver.mos_temp2385, time: 17]