Skipping 24,533 KB.. Full Log

[TypenameInvalid1.mo:0] OK
[FuncBuiltinVector.mo:0] OK
[WhenClocks.mo:0] OK
[ReductionInvalidTypeMax.mo:0] OK
[CevalMax2.mo:0] OK
[FunctionalArg1.mo:0] OK
[ArrayRange.mo:0] OK
[Enum8.mo:0] OK
[FixedFinalParameter.mo:0] OK
[InnerOuter8.mo:0] OK
[loop3.mo:0] OK
[EnumArrayConnector.mo:0] OK
[PartialType2.mo:0] OK
[Constant6.mo:0] OK
[Final1.mo:0] OK
[CevalFuncArray1.mo:0] OK
[Tanh.mo:1] OK
[RedeclareFlowEffort.mo:1] OK
[InnerOuterMissing7.mo:1] OK
[ImportConflict2.mo:1] OK
[PolynomialEvaluator3.mo:1] OK
[DoubleWhenSequential.mo:1] OK
[Array1.mos:1] OK
[Size3.mo:1] OK
[BindingInvalidType3.mo:1] OK
[OperatorOverloadConstructorHideDefault.mo:0] OK
[Algorithm2.mo:0] OK
[PartialType1.mo:0] OK
[FunctionEval3.mo:0] OK
[lookup2.mo:0] OK
[InnerOuter1.mo:0] OK
[Condition2.mo:0] OK
[TypeArray.mo:0] OK
[ConnectHierarchical2.mo:0] OK
[CevalSkew1.mo:0] OK
[ArrayBoundsAlg1.mo:0] OK
[FuncBuiltinMod.mo:0] OK
[TopLevelInputs2.mo:0] OK
[RecursiveDefinition.mo:0] OK
[DuplicateFunctions.mos:0] OK
[Lookup1.mo:0] OK
[BuiltinAttribute17.mo:0] OK
[IntPow.mo:0] OK
[RecordConstructorVectorization.mo:0] OK
[CevalArrayConstant2.mo:0] OK
[FlowInvalid1.mo:0] OK
[SumVar.mo:0] OK
[FuncBuiltinMath.mo:0] OK
[FuncMap1.mo:0] OK
[RecursiveShort.mo:0] OK
[Array1.mo:0] OK
[OperatorOverloadConstructorInvalidOutput1.mo:0] OK
[ModifierClass.mo:0] OK
[redeclare4.mo:0] OK
[FuncStringInvalid2.mo:0] OK
[BindingArray5.mo:0] OK
[Delay8.mo:0] OK
[ArrayDim1.mo:0] OK
[CatFunc.mo:0] OK
[Modification8.mo:0] OK
[RealDiv.mo:0] OK
[NestedRecordTestInput.mos:0] OK
[FunctionDerivativeInvalidInput1.mo:0] OK
[Atan2.mo:0] OK
[CevalSign1.mo:0] OK
[UnitCheck16.mos:0] OK
[ExpandableConnectorPresent1.mo:1] OK
[ArrayVectorVectorMul3.mo:1] OK
[refactorGraphAnn1.mos:1] OK
[Connect13.mo:1] OK
[usertype6.mo:1] OK
[ClassAttributes4.mo:1] OK
[ModClass6.mo:0] OK
[Floor.mo:0] OK
[CevalConstant1.mo:0] OK
[SimpleIntegrator2.mo:0] OK
[ForEquation1.mo:0] OK
[DimUnknown1.mo:0] OK
[CevalDer2.mo:0] OK
[Connect5.mo:0] OK
[ConnectNonConnector6.mo:0] OK
[CevalMatrixProduct1.mo:0] OK
[CevalMatrixVectorMul1.mo:0] OK
[EnumDimSum.mo:0] OK
[prtest.mo:0] OK
[ConvertUnits.mos:0] OK
[DuplicateMod7.mo:0] OK
[BuiltinAttribute19.mo:0] OK
[modelica_1_1_Array9.mo:0] OK
[UnitCheck19.mos:0] OK
[mod6.mo:0] OK
[DimInvalidExp1.mo:0] OK
[RecordSimple.mo:0] OK
[ExtendReplaceable1.mo:0] OK
[ArrayAssignEmpty.mo:0] OK
[IfEquation2.mo:0] OK
[SizeInvalidType3.mo:0] OK
[InStreamReduction1.mo:0] OK
[ArrayBounds2.mo:0] OK
[Inline1.mo:0] OK
[FuncBuiltinGetInstanceName.mo:0] OK
[ImportUnqualified2.mo:0] OK
[CevalTan1.mo:0] OK
[ReinitInvalid6.mo:0] OK
[PartialApplication1.mo:0] OK
[Transpose.mo:0] OK
[EquationIf4.mo:0] OK
[OperatorOverloadArrayOp4.mo:0] OK
[PackageSimple.mo:0] OK
[UnitCheck14.mos:0] OK
[AssertInvalid3.mo:0] OK
[mod5.mo:0] OK
[CevalArray1.mo:0] OK
[ReinitInvalid5.mo:1] OK
[Transpose2.mo:1] OK
[OperatorNonEncapsulated1.mo:1] OK
[MultipleInheritanceConnect.mo:1] OK
[Break2.mo:1] OK
[RecursiveFunctionCall.mo:1] OK
[Type7.mo:1] OK
[dim19.mo:0] OK
[WhenNotInitial.mo:0] OK
[UnitCheck1.mos:0] OK
[StringLiterals.mo:0] OK
[SimpleIntegrator1.mo:0] OK
[Ticket4838.mo:0] OK
[UnitCheck4.mos:0] OK
[ExpandableConnectorFlow1.mo:0] OK
[ArrayDeclaration3.mo:0] OK
[SubscriptCevalWhole1.mo:0] OK
[Constant1.mo:0] OK
[ComponentNamesRedecl.mo:0] OK
[Algorithm1.mo:0] OK
[TypenameInvalid2.mo:0] OK
[UnitCheck6.mos:0] OK
[AccessDemoIllegalMod.mo:0] OK
[While.mo:0] OK
[ConferenceTut1.mo:0] OK
[ExtendSelf1.mo:0] OK
[RecursiveExtends1.mo:0] OK
[TupleInvalid4.mo:0] OK
[IfExpression3.mo:0] OK
[Ticket5680.mos:0] OK
[ProtectedStructural.mo:0] OK
[CevalFuncAssert1.mo:0] OK
[FuncBuiltinVectorWrongType1.mo:0] OK
[ArrayDivError.mos:0] OK
[Connect1.mo:0] OK
[RedeclareComponentClass.mo:0] OK
[ArrayCurlyBrackets.mo:0] OK
[const6.mo:0] OK
[enum4.mo:0] OK
[RealAdd.mo:0] OK
[ImplicitRangeReductionInvalid2.mo:0] OK
[Function7.mo:0] OK
[RecordBinding1.mo:0] OK
[FlowDeclType.mo:0] OK
[EnumRedeclaration.mo:0] OK
[Constant12.mo:0] OK
[type2.mo:0] OK
[EquationComponent3.mo:0] OK
[UnitCheck14.mos:0] OK
[Extends2.mo:1] OK
[ForIf.mo:1] OK
[CevalRecordArray4.mo:1] OK
[Faculty2.mo:1] OK
[inst4.mo:1] OK
[BS17.mo:1] OK
[Array14.mo:1] OK
[CevalIf1.mo:0] OK
[UnitCheck6.mos:0] OK
[NestedClasses.mo:0] OK
[FuncStringInvalid1.mo:0] OK
[BS2.mo:0] OK
[Protected1.mo:0] OK
[UnitCheck3.mos:0] OK
[ExternalFunctionInvalidSection1.mo:0] OK
[RecursiveInst3.mo:0] OK
[TypenameInvalid3.mo:0] OK
[FunctionMultiOutput2.mo:0] OK
[JoinThreeVectors2.mo:0] OK
[OperationDiv1.mo:0] OK
[RecursiveInst1.mo:0] OK
[IntDivOverflow.mos:0] OK
[ConditionalArrayExpression1.mo:0] OK
[SizeInvalidIndex4.mo:0] OK
[SubscriptCevalIndexRange1.mo:0] OK
[PartialFn3.mos:0] OK
[CevalSin1.mo:0] OK
[IntDiv.mo:0] OK
[MatchCase17.mo:0] OK
[SynchronousFeatures.SpeedControl.mos:0] OK
[OperatorOverloadArrayOp2.mo:0] OK
[Concat3.mo:0] OK
[enum7.mo:0] OK
[InputDeclType.mo:0] OK
[Vectorizable3.mo:0] OK
[FuncBuiltinCeil.mo:0] OK
[FunctionDerivativeMissingName1.mo:0] OK
[Connect12.mo:0] OK
[ModifierProblem.mos:0] OK
[ClassMod6.mo:0] OK
[MatrixRowIndexing.mo:0] OK
[RecordExtends1.mo:0] OK
[BM14.mo:0] OK
[Time1.mo:0] OK
[eq7.mo:0] OK
[RedeclareBaseClass1.mo:0] OK
[Overwriting2.mo:0] OK
[ticket4368.mos:0] OK
[CevalRecord4.mo:1] OK
[getCommandLineOptions.mos:1] OK
[CevalScalar1.mo:1] OK
[ConnectArrays2.mo:1] OK
[PredefinedTypes.mo:1] OK
[EnumInvalidLiteralName1.mo:0] OK
[WhenClockedElse2.mo:0] OK
[FuncBuiltinZeros.mo:0] OK
[ImplicitRangeReductionInvalid4.mo:0] OK
[CevalExp1.mo:0] OK
[NonexistentElementRedeclare2.mo:1] OK
[ComponentAttributes2.mo:0] OK
[WhenIllegalContext3.mo:0] OK
[ImportInCompositeName2.mo:0] OK
[Final3.mo:0] OK
[BuiltinAttribute1.mo:0] OK
[Import4.mo:0] OK
[ParseString.mos:0] OK
[BS13.mo:0] OK
[ExpandableConnectorNonDecl1.mo:0] OK
[ForStatement6.mos:0] OK
[FuncBuiltinDerInvalid1.mo:0] OK
[ActualStreamNonCref1.mo:0] OK
[Matrix2.mo:0] OK
[Prefix2.mo:0] OK
[VectorTest.mo:0] OK
[RedeclareMod5.mo:0] OK
[InnerOuterArray.mo:0] OK
[RedeclareEnum4.mo:0] OK
[BS10.mo:0] OK
[RedeclareInClassModification.mo:0] OK
[FunctionRecursive1.mo:0] OK
[ticket3631.mos:0] OK
[WhenInitial3.mo:0] OK
[ExternalFunctionInvalidArg1.mo:0] OK
[OperatorOverloadArrayOp1.mo:0] OK
[HydrogenIodide.mo:0] OK
[Log.mo:0] OK
[ForStatement8.mos:0] OK
[ih3.mo:0] OK
[FuncBuiltinDiagonal.mo:0] OK
[ArrayMatrixMatrixMul4.mo:0] OK
[listFile.mos:0] OK
[TypeSimple.mo:0] OK
[OperationRelational1.mo:0] OK
[const2.mo:0] OK
[ConstrainingClass2.mo:0] OK
[Bug3979.mos:0] OK
[SuperSampleTest.mo:0] OK
[FunctionDefaultArgs2.mo:0] OK
[eq2.mo:0] OK
[RecursiveExtends3.mo:1] OK
[FuncBuiltinSemiLinear.mo:1] OK
[Final2.mo:1] OK
[EquationCall.mo:1] OK
[ArrayVectorVectorMul2.mo:0] OK
[OperationMatrixVectorProduct1.mo:0] OK
[CombineSubscripts1.mo:0] OK
[DimNegative1.mo:0] OK
[BindingInvalidType4.mo:0] OK
[GreaterThan.mo:0] OK
[Rem.mo:0] OK
[const13.mo:0] OK
[AssignmentToInput.mo:0] OK
[ArrayOperators.mo:0] OK
[ErrorInvalidPattern2.mo:0] OK
[AlgorithmNoRetCall.mo:0] OK
[CardinalityArray.mo:0] OK
[BC11.mo:0] OK
[FuncInteger.mo:0] OK
[ticket4781.mos:0] OK
[ConnectNonConnector5.mo:0] OK
[InnerOuterMissing1.mo:0] OK
[Annotations.mo:0] OK
[RedeclareMod7.mo:0] OK
[Function2.mo:0] OK
[DuplicateElementsExtends.mo:0] OK
[DuplicateMod4.mo:0] OK
[ArrayVectorVectorMul1.mo:0] OK
[WhenNested2.mo:0] OK
[FuncVectorization3.mo:0] OK
[TypeExtends1.mo:0] OK
[InnerOuterInvalidType1.mo:0] OK
[EnumFuncRel.mo:0] OK
[InStreamInsideOutside.mo:0] OK
[ArrayMatrixMatrixMul1.mo:0] OK
[const12.mo:0] OK
[AlgorithmFor5.mo:0] OK
[DimInvalidType2.mo:0] OK
[FunctionExtends1.mo:0] OK
[ConditionInvalidBinding2.mo:0] OK
[InnerOuterInvalidMod4.mo:0] OK
[RedeclareLocalClass.mo:0] OK
[DuplicateMod5.mo:0] OK
[usertype4.mo:0] OK
[ClassExtends5.mo:1] OK
[ConnectorIllegal4.mo:1] OK
[NonexistentRedeclareModifier2.mo:1] OK
[StringConcatenation.mo:1] OK
[DimUnknown2.mo:1] OK
[NestedSubscriptFor.mo:1] OK
[FunctionalArg2.mo:1] OK
[ExternalFunctionInvalidLang1.mo:1] OK
[IllegalGraphics.mos:1] OK
[ClassExtends1.mo:1] OK
[SizeInvalidType2.mo:0] OK
[const11.mo:0] OK
[Cardinality4.mo:0] OK
[FuncDefaultArg1.mo:0] OK
[FiveForEquations.mo:0] OK
[FuncBuiltinOnes.mo:0] OK
[CyclicBindingConditional.mo:0] OK
[InvalidComponentExtends2.mo:0] OK
[WhenIllegalContext2.mo:0] OK
[ImportSubPackage1.mo:0] OK
[ConnectArrays3.mo:0] OK
[GetComponents.mos:0] OK
[RecursiveInst2.mo:0] OK
[ArrayBoundsBinding1.mo:0] OK
[BindingArray2.mo:0] OK
[ExpandableConnector3.mo:0] OK
[Identity3.mo:0] OK
[BindingArray7.mo:0] OK
[Extends6.mo:0] OK
[ConnectInnerOuter.mo:0] OK
[IfEquation4.mo:0] OK
[GetBooleanClassAnnotation.mos:0] OK
[AccessDemoLegalMod.mo:0] OK
[FuncBuiltinDer.mo:0] OK
[RedeclareElementComp3.mo:0] OK
[InOutArray.mo:0] OK
[FuncBuiltinCross.mo:0] OK
[ExtendInherited1.mo:0] OK
[Vectorizable7.mo:0] OK
[ConstructParameters.mo:0] OK
[DimUnknown3.mo:0] OK
[Each3.mo:0] OK
[Wild1.mo:0] OK
[CevalRecord1.mo:0] OK
[CevalLog2.mo:0] OK
[ImportUnqualified3.mo:0] OK
[ArrayDim4.mo:0] OK
[WhenStatement3.mo:0] OK
[InnerOuterNotInner1.mo:0] OK
[ForStatement1.mo:1] OK
[MinMax.mo:1] OK
[HeatTank.mo:1] OK
[Function12.mo:1] OK
[SubscriptCevalIndex1.mo:1] OK
[setSourceFileListFile.mos:1] OK
[ArrayConstruct1.mo:1] OK
[RecordBinding8.mo:1] OK
[BlockResult.mo:0] OK
[CevalCos1.mo:0] OK
[Connect2.mo:0] OK
[SubScript2.mo:0] OK
[PatternMatchInvalidType.mo:0] OK
[Break1.mo:0] OK
[loop2.mo:0] OK
[DeclarationOrder2.mo:0] OK
[ExtendsVisibility1.mo:0] OK
[ArrayRange.mo:0] OK
[RedeclareClass1.mo:0] OK
[RecordModifications2.mo:0] OK
[ArrayModTypeError.mo:0] OK
[OperationVectorMatrixProduct1.mo:0] OK
[EquationInvalidType1.mo:0] OK
[MultipleDeclarations.mo:0] OK
[ModifierVariable.mo:0] OK
[Redeclare6.mos:0] OK
[AddComponent2.mos:0] OK
[RedeclareClass1.mo:0] OK
[ArrayFromRange.mos:0] OK
[RecordNonPublic.mo:0] OK
[UnknownDimensionMod.mo:0] OK
[BuiltinTimeInvalid1.mo:0] OK
[MultiInheritanceRedeclare2.mo:0] OK
[FunctionRecordArg2.mo:0] OK
[ChangeSourceFile.mos:0] OK
[ReinitInvalid4.mo:0] OK
[CevalMatrixPow1.mo:0] OK
[dim7.mo:0] OK
[TestMissingModifiers.mos:0] OK
[redeclare2.mo:0] OK
[CevalRem1.mo:0] OK
[InnerOuter3.mo:0] OK
[Break.mo:0] OK
[Algorithm3.mo:0] OK
[ExpandableConnectorNonDecl2.mo:0] OK
[RedeclareDim2.mo:0] OK
[RedeclareClassComponent.mo:0] OK
[InnerOuterMissing4.mo:0] OK
[FuncBuiltinDelay.mo:0] OK
[EnumFuncIf.mo:1] OK
[HideVariableForEquations.mo:1] OK
[And.mo:1] OK
[OperatorFunction1.mo:1] OK
[Connect14.mo:1] OK
[ImportConflict4.mo:1] OK
[SizeInvalidArgs2.mo:0] OK
[Transpose3.mo:1] OK
[ConditionInvalidContext2.mo:0] OK
[FuncSimple.mo:0] OK
[DuplicateElements10.mo:0] OK
[func2.mo:0] OK
[IfExpression1.mo:0] OK
[StringReal.mo:0] OK
[Cos.mo:0] OK
[FuncBuiltinSum.mo:0] OK
[Cardinality1.mo:0] OK
[IfConnect1.mo:0] OK
[ClassAttributes3.mo:0] OK
[RealSub.mo:0] OK
[DimSize2.mo:0] OK
[Symmetric3.mo:0] OK
[redeclare6.mo:0] OK
[CardinalityInvalidArg2.mo:0] OK
[DoubleFuncDeclaration.mo:0] OK
[Condition1.mo:0] OK
[package-s-1.mo:0] OK
[IfConnect2.mo:0] OK
[ClassExtendsMissing1.mo:0] OK
[StructuralParameter1.mo:0] OK
[InStreamNonCref1.mo:0] OK
[ReinitInvalidType.mo:0] OK
[Faculty1.mo:0] OK
[WhenCondition2.mo:0] OK
[Scalar.mo:0] OK
[Log10.mo:0] OK
[RedeclareMod4.mo:0] OK
[Import1.mo:0] OK
[if_then_elseif_else.mo:0] OK
[ExternalFunctionImplicit4.mo:0] OK
[Abs.mo:0] OK
[Encapsulated4.mo:0] OK
[ReinitInvalidType2.mo:0] OK
[ConnectComplex1.mo:0] OK
[Size4.mo:0] OK
[ExternalFunctionBuiltin.mo:0] OK
[Bug3783.mos:0] OK
[BuiltinTime1.mo:1] OK
[RealPowEw.mo:1] OK
[ErrorSimPackage.mos:1] OK
[FunctionEvalFail.mo:1] OK
[InnerOuterWithExtends.mo:1] OK
[ArrayExponentiation.mo:1] OK
[FuncBuiltinSign.mo:1] OK
[UncertaintyFlatten1.mo:1] OK
[AlgorithmCondAssign2.mo:1] OK
[ConnectTwoSources.mo:1] OK
[AlgorithmCondAssign1.mo:1] OK
[ArrayBounds1.mo:1] OK
[TupleError.mo:0] OK
[CevalArrayConstructor2.mo:0] OK
[ImportComponent1.mo:0] OK
[ModifyConstant5.mo:0] OK
[ClassExtends2.mo:0] OK
[IfEquationEval3.mo:0] OK
[ErrorFunctionCallNumArgs.mos:0] OK
[ConnectNonConnector1.mo:0] OK
[getClassNames.mos:0] OK
[Array10.mo:0] OK
[Extends3.mo:0] OK
[StatementInvalidType1.mo:0] OK
[ArrayMatrixVectorMul1.mo:0] OK
[mod10.mo:0] OK
[CevalFuncArray2.mo:0] OK
[ArrayAsAliasInExtends.mo:0] OK
[ConnectNonConnector2.mo:0] OK
[WhenCondition4.mo:0] OK
[ArrayEWOpsCEval4.mo:0] OK
[ModifierRedeclare.mo:0] OK
[StateSelectVariability1.mo:0] OK
[Modification2.mo:0] OK
[bug_2271.mos:0] OK
[modifyOuter2.mo:0] OK
[WhenEquation.mo:0] OK
[ConstructFunc.mo:0] OK
[ArrayDiv.mo:0] OK
[ConnectionOrder2.mo:0] OK
[FinalRedeclareModifier.mo:0] OK
[IntPowOverflow.mos:0] OK
[FunctionCompOrder2.mo:0] OK
[ConnectorSubtypeComp.mo:0] OK
[Subscript4.mo:0] OK
[FuncBuiltinScalar.mo:0] OK
[ConnectInner2.mo:0] OK
[Comment2.mo:0] OK
[FlowDeclRecord.mo:1] OK
[SubScript1.mo:1] OK
[DoubleClassDeclaration2.mo:1] OK
[EqualityEquations.mo:1] OK
[cond4.mo:1] OK
[IfEquationImpure1.mo:1] OK
[ConnectFlowEffort.mo:1] OK
[AssertInvalid2.mo:1] OK
[DimCyclic2.mo:1] OK
[ArraySlice1.mo:1] OK
[TypeDim3.mo:1] OK
[FuncOverloadExactPrefer.mo:0] OK
[SubscriptTypename1.mo:0] OK
[packages1.mo:0] OK
[OperationSub1.mo:0] OK
[ArrayMatrixMatrixMul6.mo:0] OK
[const8.mo:0] OK
[AssertTest2.mo:0] OK
[DimCyclic4.mo:0] OK
[ArrayMatrixVectorMul2.mo:0] OK
[usertype2.mo:0] OK
[Encapsulated2.mo:0] OK
[Vectorizable6.mo:0] OK
[ForEquation7.mo:0] OK
[PackageConstant1.mo:0] OK
[MissingModifiersPackages.mo:0] OK
[Type10.mo:0] OK
[ExtendSelf3.mo:0] OK
[DimUnknown5.mo:0] OK
[SampleTest.mo:0] OK
[ForEquation6.mo:0] OK
[IfStatementIllegal.mos:0] OK
[CevalAcos1.mo:0] OK
[ScopeDeclaration1.mo:0] OK
[InputDeclConnector.mo:0] OK
[ArrayAccess.mo:0] OK
[FuncBuiltinProduct.mo:0] OK
[End3.mo:0] OK
[BuiltinAttribute4.mo:0] OK
[InnerOuterMissing3.mo:0] OK
[Extends4.mo:0] OK
[FunctionEval4.mo:0] OK
[CevalMax1.mo:0] OK
[CevalTanh1.mo:0] OK
[FuncUnknownDim1.mo:0] OK
[InvalidFunctionBinding.mo:0] OK
[ImportConflict1.mo:0] OK
[enum1.mo:0] OK
[ModelAccess.mo:0] OK
[SubscriptTooMany1.mo:1] OK
[Extends7.mo:1] OK
[Function6.mo:1] OK
[ExternalObjectStructorCall1.mo:1] OK
[ForStatement4.mos:1] OK
[CevalDiv1.mo:1] OK
[TypeDimNonType1.mo:1] OK
[IconsRecursiveTest.mo:1] OK
[DiscreteDeclConnector.mo:1] OK
[Function8.mo:1] OK
[IfEquationEval2.mo:0] OK
[Modification1.mo:0] OK
[ForEquationShadow1.mo:0] OK
[ConnectHierarchical1.mo:0] OK
[Lookup8.mo:0] OK
[WhenVariability2.mo:0] OK
[inst5.mo:0] OK
[NonexistentRedeclareModifier1.mo:0] OK
[InnerOuterInvalidMod1.mo:0] OK
[BuiltinAttribute6.mo:0] OK
[FuncBuiltinMatrixWrongType1.mo:0] OK
[FuncBuiltinOuterProduct.mo:0] OK
[Extends1.mo:0] OK
[ArrayDivError.mo:0] OK
[EnumEquation1.mo:0] OK
[InStreamFlowThreshold.mo:0] OK
[ArrayMultiplication.mo:0] OK
[CevalMin2.mo:0] OK
[conn9.mo:0] OK
[RecordBinding2.mo:0] OK
[OperatorOverloadArrayOp3.mo:0] OK
[DuplicateMod2.mo:0] OK
[IfEquation8.mo:0] OK
[InnerOuter5.mo:0] OK
[AssertTest1.mo:0] OK
[CardinalityInvalidArg1.mo:0] OK
[FuncBuiltinReduction.mo:0] OK
[MissingRedeclare1.mo:0] OK
[DisturbedResistance3.mo:0] OK
[FuncBuiltinEdge.mo:0] OK
[ForNested.mo:0] OK
[FuncWildcard.mo:0] OK
[Shadowing1.mos:0] OK
[ceval4.mo:0] OK
[OperationAdd1.mo:0] OK
[ClassExtendsBuiltin3.mo:0] OK
[ConditionInvalidType1.mo:0] OK
[VectorDimension.mo:0] OK
[FuncBuiltinSmoothNonParam.mo:1] OK
[Range1.mo:1] OK
[ClockTest.mo:1] OK
[InvalidExternalObject1.mo:1] OK
[ModScope1.mo:1] OK
[runScenarios.mos:1] OK
[BlockMatrix3.mo:1] OK
[InnerOuter4.mo:1] OK
[Concatenation2.mo:0] OK
[Modification7.mo:1] OK
[ReductionInvalidTypeMin.mo:0] OK
[ExternalFunctionAnno.mo:0] OK
[ConnectorCompOrder.mo:0] OK
[Encapsulated1.mo:0] OK
[IfExpression7.mo:0] OK
[Algorithm3.mo:0] OK
[AssignParameter1.mo:0] OK
[RecordFuncParam.mo:0] OK
[InnerOuterInvalidMod3.mo:0] OK
[Connect5.mo:0] OK
[DimUnknown7.mo:0] OK
[NotbasicType.mos:0] OK
[Array8.mo:0] OK
[Cosh.mo:0] OK
[Sqrt.mo:0] OK
[BuiltinAttribute9.mo:0] OK
[InStreamInsideOutside.mo:0] OK
[bindings1.mo:0] OK
[FunctionMultiOutput3.mo:0] OK
[ArrayMatrixVectorMul4.mo:0] OK
[FinalMod1.mo:0] OK
[IfEquationEval1.mo:0] OK
[OperationSubEW1.mo:0] OK
[modelica_1_1_Function10.mo:0] OK
[FuncBuiltinFill2.mo:0] OK
[CevalRecordArray2.mo:0] OK
[ClassMod5.mo:0] OK
[Expressions.mo:0] OK
[WhenIllegalContext4.mo:0] OK
[FunctionNoOutput1.mo:0] OK
[IfExpression2.mo:0] OK
[ImportNamedInvalid1.mo:0] OK
[WhenVariability1.mo:0] OK
[PartialType3.mo:0] OK
[bindings7.mo:0] OK
[Real2Integer2.mo:0] OK
[ReinitArray.mo:0] OK
[AlgorithmFor3.mo:0] OK
[FunctionNonInputOutputParameter.mo:1] OK
[RedeclareElementCondition2.mo:1] OK
[const5.mo:1] OK
[CevalIntegerEnum1.mo:1] OK
[RangeTypeError1.mo:1] OK
[UnitCheck18.mos:1] OK
[RedeclareModifierInvalid1.mo:1] OK
[FuncBuiltinIdentity.mo:0] OK
[RecordConstant2.mo:1] OK
[CevalSinh1.mo:1] OK
[RedeclareElementMissing1.mo:0] OK
[BuiltinAttribute2.mo:0] OK
[CevalFuncSubscript2.mo:0] OK
[ExpandableConnectorFlow2.mo:0] OK
[RecordParameters.mos:0] OK
[MatrixPow.mo:0] OK
[InnerOuter9.mo:0] OK
[FunctionDerivativeInvalidOrder2.mo:0] OK
[FuncBuiltinNdims.mo:0] OK
[ClassExtendsBuiltin1.mo:0] OK
[Sin.mo:0] OK
[MoveComponent.mos:0] OK
[When4.mo:0] OK
[When3.mo:0] OK
[SimpleIntegrator3.mo:0] OK
[ArrayVectorMatrixMul2.mo:0] OK
[Concatenation.mo:0] OK
[RedeclareClass4.mo:0] OK
[dim18.mo:0] OK
[Reinit1.mo:0] OK
[Reinit2.mo:0] OK
[ClassExtends4.mo:0] OK
[ReinitInvalid3.mo:0] OK
[Array_builtin.mo:0] OK
[WhenIllegalContext1.mo:0] OK
[DuplicateElements9.mo:0] OK
[DAEexample.mo:0] OK
[ExpandableConnector1.mo:0] OK
[OperationMul1.mo:0] OK
[ForEquationEnum2.mo:0] OK
[ExternalFunctionImplicit1.mo:0] OK
[BuiltinAttribute15.mo:0] OK
[redeclare13.mo:0] OK
[BuiltinAttribute20.mo:0] OK
[DimCyclic1.mo:0] OK
[lookup3.mo:0] OK
[Tank.mo:0] OK
[OverrideFinalTest.mo:0] OK
[CompAsFunc.mo:0] OK
[InnerOuterInvalidMod5.mo:1] OK
[FaultNonPropagation.mo:1] OK
[FunctionEval1.mo:1] OK
[OperatorOverloadConstructor1.mo:1] OK
[DuplicateMod2.mo:1] OK
[OperationSubEW2.mo:1] OK
[ForStatement7.mos:1] OK
[InvalidWild1.mos:1] OK
[Ticket4786.mo:1] OK
[TupleOperation2.mo:0] OK
[ComplexBinding1.mo:0] OK
[ZeroDimUnconnectedFlow2.mo:0] OK
[FuncBuiltinPromote.mo:0] OK
[ConnectDiffOrder2.mo:0] OK
[ArrayAddition.mo:0] OK
[CevalRecordArray5.mo:0] OK
[SumSeriesWhile.mo:0] OK
[IntMulOverflow.mos:0] OK
[FuncBuiltinInteger.mo:0] OK
[ForStatement2.mo:0] OK
[ArrayVectorMatrixMul1.mo:0] OK
[InvalidSizeIndex2.mo:0] OK
[ClassExtendsInvalid2.mo:0] OK
[FunctionDerivativeInvalidOrder1.mo:0] OK
[UnitCheck10.mos:0] OK
[WildLexerMetaModelica.mo:0] OK
[ConstantConnector3.mo:0] OK
[WhenCondition1.mo:0] OK
[CevalMin1.mo:0] OK
[Function10.mo:0] OK
[ComponentAttributes1.mo:0] OK
[CevalDiagonal1.mo:0] OK
[loop1.mo:0] OK
[OperationLogicalBinary1.mo:0] OK
[FuncClassParam.mo:0] OK
[Modification12.mo:0] OK
[DeclarationEquation3.mo:0] OK
[VectorizeOneReturnValue.mo:0] OK
[ExtendsShort3.mo:0] OK
[const10.mo:0] OK
[ListFile.mos:0] OK
[DuplicateElements4.mo:0] OK
[FunctionReturn.mo:0] OK
[ExternalObject3.mo:0] OK
[TupleOperation4.mo:0] OK
[OperationMatrixProduct1.mo:0] OK
[Lookup4.mo:0] OK
[IfEquation3.mo:0] OK
[ConstantReductions.mo:1] OK
[WhenNested.mo:1] OK
[WhenCondition3.mo:1] OK
[RecordConstructors2.mo:1] OK
[ClassMod4.mo:1] OK
[ConnectDiffOrder1.mo:1] OK
[FunctionRecordArg1.mo:1] OK
[ImportSubPackage2.mo:1] OK
[mod1.mo:1] OK
[BindingInvalidType2.mo:0] OK
[CevalArrayConstant1.mo:0] OK
[FunctionEval6.mo:0] OK
[CevalVector1.mo:0] OK
[PackageConstant3.mo:0] OK
[FuncExtends.mo:0] OK
[Integer2Real.mo:0] OK
[mod12.mo:0] OK
[FuncBuiltinRem.mo:0] OK
[IntervalTest.mo:0] OK
[ScopeModification2.mo:0] OK
[ConstrainedByMods.mo:0] OK
[WhenCondition5.mo:0] OK
[redeclare10.mo:0] OK
[ConstantDeclConnector.mo:0] OK
[OperatorOverloadBinaryAmbiguous.mo:0] OK
[ISO-8859-1.mos:0] OK
[enum5.mo:0] OK
[ArrayVectorMatrixMul3.mo:0] OK
[ConnectArrays1.mo:0] OK
[ConnectInner3.mo:0] OK
[CevalLog1.mo:0] OK
[Extends10.mo:0] OK
[End.mo:0] OK
[InheritanceProtected.mo:0] OK
[FlowDeclRecord2.mo:0] OK
[EqualityConstraintLookup1.mo:0] OK
[ClassExtends3.mo:0] OK
[ImportQualifiedInvalid1.mo:0] OK
[Terminate1.mo:0] OK
[CevalFuncRecursive1.mo:0] OK
[ArraySizeFromFunc.mo:0] OK
[InStreamVariability1.mo:0] OK
[ConstructParameters1.mo:0] OK
[OperatorOverloadConstructorDefault2.mo:0] OK
[DimUnknown8.mo:0] OK
[ImportFullyQualified.mo:0] OK
[ArrayEWOpsCEval5.mo:0] OK
[DimSize3.mo:0] OK
[PartialLookup1.mo:0] OK
[redeclare5.mo:0] OK
[MissingSemicolon.mo:0] OK
[CevalMod1.mo:0] OK
[ForConnect1.mo:0] OK
[RedeclareEnum3.mo:1] OK
[RedeclareMod2.mo:1] OK
[Class3.mo:0] OK
[ModifyUnknown2.mo:1] OK
[ModifyConstant3.mo:0] OK
[CevalLog102.mo:1] OK
[Cat1.mo:1] OK
[RealOpLexerModelica.mo:0] OK
[Identifier.mo:0] OK
[DoubleClassDeclaration1.mo:0] OK
[ClassExtends3.mo:0] OK
[IfElseIf.mo:0] OK
[DuplicateElements1.mo:0] OK
[ArrayModification2.mo:0] OK
[SmallLinsys.mo:0] OK
[Class4.mo:0] OK
[PropagateExtends.mo:0] OK
[ConnectInitial.mo:0] OK
[StateSelect3.mo:0] OK
[Assign4.mo:0] OK
[Declaration2.mo:0] OK
[SimpleIntegrator4.mo:0] OK
[ParseError3.mo:0] OK
[EmptyArray.mo:0] OK
[ArrayModification1.mo:0] OK
[Declaration1.mo:0] OK
[Assign1.mo:0] OK
[Declaration3.mo:0] OK
[Assign2.mo:0] OK
[ConnectAlgorithm.mo:0] OK
[ParseError2.mo:0] OK
[InitialConnection.mo:0] OK
[MetaModelicaStringOpModelicaLexer.mo:0] OK
[ParseError1.mo:0] OK
[MissingEquation.mo:0] OK
[Assign3.mo:0] OK
[InvalidPartialFunction.mo:0] OK
[ExtendSelf2.mo:0] OK

Use of uninitialized value $username in concatenation (.) or string at ./runtests.pl line 445.

Slowest test 887.247s ./simulation/modelica/initialization/OverdeterminedInitialization.Fluid.DynamicPipesSeriesLargeNSteadyStateInitial.mos
0 of 4197 failed
+ CODE=0
+ test 0 = 0 -o 0 = 7
+ test 0 = 0
+ mkdir -p /cache/runtest//1.17/
+ cp ../runtest.db.dir ../runtest.db.pag /cache/runtest//1.17/
[Pipeline] junit
Recording test results
[Checks API] No suitable checks publisher found.
[Pipeline] }
[Pipeline] // script
[Pipeline] }
[Pipeline] // withEnv
[Pipeline] }
$ docker stop --time=1 04f6159a8d0bc7076671d50d77f6d83993b9d7727f296414c58463dd85dcbf04
$ docker rm -f 04f6159a8d0bc7076671d50d77f6d83993b9d7727f296414c58463dd85dcbf04
[Pipeline] // withDockerContainer
[Pipeline] }
[Pipeline] // withEnv
[Pipeline] }
[Pipeline] // node
[Pipeline] }
[Pipeline] // stage
[Pipeline] }
[Pipeline] // parallel
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (OMEdit testsuite)
[Pipeline] parallel
[Pipeline] { (Branch: clang-qt5)
[Pipeline] stage
[Pipeline] { (clang-qt5)
[Pipeline] node
Running on asap-1 in /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17
[Pipeline] {
[Pipeline] checkout
The recommended git tool is: git
using credential github
Fetching changes from the remote Git repository
Cleaning workspace
 > git rev-parse --resolve-git-dir /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/.git # timeout=10
 > git config remote.origin.url https://github.com/OpenModelica/OpenModelica.git # timeout=10
 > git rev-parse --verify HEAD # timeout=10
Resetting working tree
 > git reset --hard # timeout=10
 > git clean -fdx # timeout=10
 > git submodule foreach --recursive git reset --hard # timeout=10
 > git submodule foreach --recursive git clean -fdx # timeout=10
Checking out Revision f1024952698ec0ac50cc2d2ba9f7a03c791dbb57 (maintenance/v1.17)
Fetching upstream changes from https://github.com/OpenModelica/OpenModelica.git
 > git --version # timeout=10
 > git --version # 'git version 2.17.1'
using GIT_ASKPASS to set credentials GitHub Access Token
 > git fetch --tags --progress -- https://github.com/OpenModelica/OpenModelica.git +refs/heads/maintenance/v1.17:refs/remotes/origin/maintenance/v1.17 # timeout=10
 > git config core.sparsecheckout # timeout=10
 > git checkout -f f1024952698ec0ac50cc2d2ba9f7a03c791dbb57 # timeout=10
 > git branch -a -v --no-abbrev # timeout=10
 > git branch -D maintenance/v1.17 # timeout=10
 > git checkout -b maintenance/v1.17 f1024952698ec0ac50cc2d2ba9f7a03c791dbb57 # timeout=10
Commit message: "Fix build with cmake >= 3.20 (#7445, #7447)"
Cleaning workspace
 > git remote # timeout=10
 > git submodule init # timeout=10
 > git submodule sync # timeout=10
 > git config --get remote.origin.url # timeout=10
 > git submodule init # timeout=10
 > git config -f .gitmodules --get-regexp ^submodule\.(.+)\.url # timeout=10
 > git config --get submodule.OMOptim.url # timeout=10
 > git config -f .gitmodules --get submodule.OMOptim.path # timeout=10
 > git config --get submodule.libraries.url # timeout=10
 > git config -f .gitmodules --get submodule.libraries.path # timeout=10
 > git config --get submodule.OMSimulator.url # timeout=10
 > git config -f .gitmodules --get submodule.OMSimulator.path # timeout=10
 > git config --get submodule.OMCompiler/3rdParty.url # timeout=10
 > git config -f .gitmodules --get submodule.OMCompiler/3rdParty.path # timeout=10
 > git config --get submodule.OMSens.url # timeout=10
 > git config -f .gitmodules --get submodule.OMSens.path # timeout=10
 > git config --get submodule.OMSens_Qt.url # timeout=10
 > git config -f .gitmodules --get submodule.OMSens_Qt.path # timeout=10
 > git submodule update --init --recursive OMOptim # timeout=10
 > git submodule update --init --recursive libraries # timeout=10
 > git submodule update --init --recursive OMSimulator # timeout=10
 > git submodule update --init --recursive OMCompiler/3rdParty # timeout=10
 > git submodule update --init --recursive OMSens # timeout=10
 > git submodule update --init --recursive OMSens_Qt # timeout=10
 > git rev-parse --verify HEAD # timeout=10
Resetting working tree
 > git reset --hard # timeout=10
 > git clean -fdx # timeout=10
 > git submodule foreach --recursive git reset --hard # timeout=10
 > git submodule foreach --recursive git clean -fdx # timeout=10
[Pipeline] withEnv
[Pipeline] {
[Pipeline] isUnix
[Pipeline] sh
+ docker pull docker.openmodelica.org/build-deps:v1.16
v1.16: Pulling from build-deps
Digest: sha256:8a7268464e613d28dd8427be6c1b483a5e6379ee06ca0cd5a7af7420936baf96
Status: Image is up to date for docker.openmodelica.org/build-deps:v1.16
docker.openmodelica.org/build-deps:v1.16
[Pipeline] isUnix
[Pipeline] sh
+ docker inspect -f . docker.openmodelica.org/build-deps:v1.16
.
[Pipeline] withDockerContainer
asap-1 does not seem to be running inside a container
$ docker run -t -d -u 1001:1001 -w /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17 -v /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17:/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17:rw,z -v /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17@tmp:/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17@tmp:rw,z -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** -e ******** docker.openmodelica.org/build-deps:v1.16 cat
$ docker top abf8db241d5fcb409ea32206e1c23aca4bcf6b3bd6fdab8405a65d6984675a2f -eo pid,comm
[Pipeline] {
[Pipeline] script
[Pipeline] {
[Pipeline] isUnix
[Pipeline] echo
asap-1
[Pipeline] isUnix
[Pipeline] sh
+ git clean -ffdx
+ git submodule foreach --recursive git clean -ffdx
Entering 'OMCompiler/3rdParty'
Entering 'OMOptim'
Entering 'OMOptim/common'
Entering 'OMSens'
Entering 'OMSens_Qt'
Entering 'OMSens_Qt/common'
Entering 'OMSimulator'
Entering 'OMSimulator/3rdParty'
Entering 'OMSimulator/OMTLMSimulator'
Entering 'libraries'
[Pipeline] unstash
[Pipeline] sh
+ autoconf
[Pipeline] isUnix
[Pipeline] sh
+ pwd
+ sed -i.bak s,--with-ombuilddir=[A-Za-z0-9./_-]*,--with-ombuilddir=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build, config.status OMCompiler/config.status
[Pipeline] sh
+ ./config.status --config
+ echo ./configure 'CC=clang' 'CXX=clang++' 'FC=gfortran' 'CFLAGS=-Os' '--with-cppruntime' '--without-omc' '--without-omlibrary' '--with-omniORB' '--enable-modelica3d' '--prefix=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/install' '--without-hwloc' '--with-ombuilddir=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build'
+ bash ./config.status.2
checking for gcc... clang
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether clang accepts -g... yes
checking for clang option to accept ISO C89... none needed
checking whether we are using the GNU C++ compiler... yes
checking whether clang++ accepts -g... yes
checking how to run the C preprocessor... clang -E
ln: failed to create symbolic link '.git/hooks/pre-commit': File exists
configure: OpenModelica commit-msg hook has been installed
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
build_short: x86_64-linux-gnu
host_short: x86_64-linux-gnu
checking if cppruntime is requested... yes
checking for omlibrary target... none
checking for omniidl... /usr/bin/omniidl
checking for CORBA... omniorb
configure.ac:248: warning: AC_LANG_PROGRAM(Fortran): ignoring PROLOGUE: []
../../lib/autoconf/lang.m4:224: AC_LANG_SOURCE is expanded from...
../../lib/autoconf/lang.m4:241: AC_LANG_PROGRAM is expanded from...
../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from...
../../lib/autoconf/general.m4:2672: _AC_LINK_IFELSE is expanded from...
../../lib/autoconf/general.m4:2689: AC_LINK_IFELSE is expanded from...
../../lib/autoconf/general.m4:2698: AC_TRY_LINK is expanded from...
configure.ac:248: the top level
configure: creating ./config.status
config.status: creating Makefile
=== configuring in OMCompiler (/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMCompiler)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/install'  'CC=clang' 'CXX=clang++' 'FC=gfortran' 'CFLAGS=-Os' '--with-cppruntime' '--without-omc' '--without-omlibrary' '--with-omniORB' '--enable-modelica3d' '--without-hwloc' '--with-ombuilddir=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build' --cache-file=/dev/null --srcdir=.
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
build_short: x86_64-linux-gnu
host_short: x86_64-linux-gnu
checking for gcc... clang
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether clang accepts -g... yes
checking for clang option to accept ISO C89... none needed
checking whether we are using the GNU C++ compiler... yes
checking whether clang++ accepts -g... yes
checking how to run the C preprocessor... clang -E
checking whether make sets $(MAKE)... yes
checking whether we are using the GNU Fortran compiler... yes
checking whether gfortran accepts -g... yes
checking if -Werror works... ok
checking looking for --no-undefined... yes
clang
checking for flags to append to CFLAGS (-fno-stack-protector)... -Os -fno-stack-protector
checking for flags to append to LDFLAGS ( -Wl,--no-as-needed -Wl,--disable-new-dtags)...  -Wl,--no-as-needed -Wl,--disable-new-dtags
checking for flags to append to FCFLAGS... 
checking getconf LONG_BIT = 64 CFLAGS... adding -fPIC
checking whether clang++ supports C++11 features by default... yes
checking for omc... building it through bootstrapping (you might end up unable to recompile omc if you modify source code)
checking for library containing clock_gettime... none required
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking for antlr.Tool support... ANTLR Parser Generator   Version 2.7.7 (20060906)   1989-2005
yes
checking expat.h usability... yes
checking expat.h presence... yes
checking for expat.h... yes
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking for vprintf... yes
checking for _doprnt... no
checking for getcwd... yes
checking for select... yes
checking for strdup... yes
checking for strerror... yes
checking for scandir... no
checking for OpenMP... -fopenmp=libomp
checking runtime compiler... clang ok
checking runtime compiler CFLAGS... -fPIC -mfpmath=sse -fno-dollars-in-identifiers
checking for library containing dlopen... -ldl
NO_LPLIB: ''
checking for library containing dlopen... (cached) -ldl
checking for library containing sqrt... -lm
checking for library containing SuiteSparse_calloc... -lsuitesparseconfig
checking for library containing colamd... -lcolamd
checking for library containing make_lp... -llpsolve55_pic
checking lp_lib.h usability... no
checking lp_lib.h presence... no
checking for lp_lib.h... no
checking lpsolve/lp_lib.h usability... yes
checking lpsolve/lp_lib.h presence... yes
checking for lpsolve/lp_lib.h... yes
checking for socket... yes
checking for gethostbyname... yes
checking ffi.h usability... yes
checking ffi.h presence... yes
checking for ffi.h... yes
checking for ffi_call in -lffi... yes
checking LAPACK/BLAS flags...  -llapack -lblas  
checking for deprecated LAPACK routines... yes
checking curl/curl.h usability... yes
checking curl/curl.h presence... yes
checking for curl/curl.h... yes
checking for curl_global_init in -lcurl... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking gettext linking... in C-library
checking setlocale linking... in C-library
checking uuid/uuid.h usability... yes
checking uuid/uuid.h presence... yes
checking for uuid/uuid.h... yes
checking for uuid_unparse in -luuid... yes
checking for pthread_self in -lpthread... yes
checking for omniidl... /usr/bin/omniidl
checking for CORBA... omniorb
checking for OpenCL... checking CL/cl.h usability... yes
checking CL/cl.h presence... yes
checking for CL/cl.h... yes
configure: "parmodauto ... not enabled"
checking for revision... error: object directory /var/lib/jenkins/gitcache/OpenModelica.git/objects does not exist; check .git/objects/info/alternates.
error: object directory /var/lib/jenkins/gitcache/OpenModelica.git/objects does not exist; check .git/objects/info/alternates.
OMCompiler v1.17.0-v1.17.0.9+gf1024952
checking for OpenModelica platform name... x86_64-linux
checking for Modelica platform name... linux64
configure: creating ./config.status
config.status: creating Makefile
config.status: creating Compiler/Util/Autoconf.mo
config.status: creating Compiler/Makefile
config.status: creating Compiler/Script/Makefile
config.status: creating Compiler/Template/Makefile
config.status: creating Compiler/runtime/Makefile
config.status: creating Compiler/runtime/config.unix.h
config.status: creating Compiler/runtime/revision.h
config.status: creating Parser/Makefile
config.status: creating SimulationRuntime/OMSICpp/Makefile.env
config.status: creating SimulationRuntime/cpp/Makefile.env
config.status: creating SimulationRuntime/c/Makefile
config.status: creating SimulationRuntime/opc/ua/Makefile
config.status: creating SimulationRuntime/fmi/export/buildproject/Makefile
config.status: creating SimulationRuntime/ParModelica/Makefile
config.status: creating SimulationRuntime/ParModelica/auto/Makefile
config.status: creating SimulationRuntime/ParModelica/explicit/openclrt/Makefile
config.status: creating Compiler/boot/Makefile
config.status: creating Compiler/Lexers/Makefile
config.status: executing config.unix.h.fix commands
=== configuring in SimulationRuntime/OMSICpp (/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMCompiler/SimulationRuntime/OMSICpp)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/install'  'CC=clang' 'CXX=clang++' 'FC=gfortran' 'CFLAGS=-Os' '--with-cppruntime' '--without-omc' '--without-omlibrary' '--with-omniORB' '--enable-modelica3d' '--without-hwloc' '--with-ombuilddir=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build' --cache-file=/dev/null --srcdir=.
checking for gcc... clang
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether clang accepts -g... yes
checking for clang option to accept ISO C89... none needed
checking whether we are using the GNU C++ compiler... yes
checking whether clang++ accepts -g... yes
checking how to run the C preprocessor... clang -E
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking if boost static linking is requested... no
checking if boost real paths are requested... no
checking if c++03 support is requested... no
checking if runtime profiling is requested... no
checking if ScoreP is requested... no
ScoreP-home is set to 
checking if sundials for FMUs is requested... no
checking if parallel output is requested... no
checking if logger should be used... yes
Build type is set to RelWithDebInfo
configure: creating ./config.status
config.status: creating Makefile
=== configuring in SimulationRuntime/cpp (/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMCompiler/SimulationRuntime/cpp)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/install'  'CC=clang' 'CXX=clang++' 'FC=gfortran' 'CFLAGS=-Os' '--with-cppruntime' '--without-omc' '--without-omlibrary' '--with-omniORB' '--enable-modelica3d' '--without-hwloc' '--with-ombuilddir=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build' --cache-file=/dev/null --srcdir=.
checking for gcc... clang
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether clang accepts -g... yes
checking for clang option to accept ISO C89... none needed
checking whether we are using the GNU C++ compiler... yes
checking whether clang++ accepts -g... yes
checking how to run the C preprocessor... clang -E
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking if boost static linking is requested... no
checking if boost real paths are requested... no
checking if c++03 support is requested... no
checking if runtime profiling is requested... no
checking if ScoreP is requested... no
ScoreP-home is set to 
checking if sundials for FMUs is requested... no
checking if parallel output is requested... no
checking if logger should be used... yes
Build type is set to RelWithDebInfo
configure: creating ./config.status
config.status: creating Makefile

Configured OpenModelica successfully using the following options:
Simulations may use sundials suite: Yes
Simulations may use SUITESPARSE: Yes
ParModelica: Yes
=== configuring in OMPlot (/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMPlot)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/install'  'CC=clang' 'CXX=clang++' 'FC=gfortran' 'CFLAGS=-Os' '--with-cppruntime' '--without-omc' '--without-omlibrary' '--with-omniORB' '--enable-modelica3d' '--without-hwloc' '--with-ombuilddir=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build' --cache-file=/dev/null --srcdir=.
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for gcc... clang
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether clang accepts -g... yes
checking for clang option to accept ISO C89... none needed
checking whether we are using the GNU C++ compiler... yes
checking whether clang++ accepts -g... yes
checking whether clang++ supports C++11 features by default... yes
checking for qmake in env.vars QMAKE and QTDIR... no
checking for qmake... qmake
checking for qmake arguments... qmake -qt5
checking for lrelease... /usr/lib/qt5/bin/lrelease
build_short: x86_64-linux-gnu
host_short: x86_64-linux-gnu
checking for OPENMODELICAHOME... /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build
configure: creating ./config.status
config.status: creating Makefile
config.status: creating qwt/Makefile.unix
config.status: creating OMPlot/OMPlotGUI/Makefile.unix
config.status: creating OMPlot/OMPlotGUI/OMPlotGUI.config
config.status: creating qwt/qwt.config
=== configuring in OMEdit (/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/install'  'CC=clang' 'CXX=clang++' 'FC=gfortran' 'CFLAGS=-Os' '--with-cppruntime' '--without-omc' '--without-omlibrary' '--with-omniORB' '--enable-modelica3d' '--without-hwloc' '--with-ombuilddir=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build' --cache-file=/dev/null --srcdir=.
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for gcc... clang
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether clang accepts -g... yes
checking for clang option to accept ISO C89... none needed
checking whether we are using the GNU C++ compiler... yes
checking whether clang++ accepts -g... yes
checking whether clang++ supports C++11 features by default... yes
checking for qmake in env.vars QMAKE and QTDIR... no
checking for qmake... qmake
checking for qmake arguments... qmake -qt5
checking for lrelease... /usr/lib/qt5/bin/lrelease
build_short: x86_64-linux-gnu
host_short: x86_64-linux-gnu
checking for OPENMODELICAHOME... /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build
checking how to run the C++ preprocessor... clang++ -E
checking for osg/qt include order bugs (broken OSG version)... OK
checking for osg/qt broken OpenGL... OK
checking for osg/qt broken OpenGL... OK
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking osg/Uniform usability... yes
checking osg/Uniform presence... yes
checking for osg/Uniform... yes
"OSG is enabled"
checking check if -lboost_regex is needed for OMSimulator... no need for -lboost_regex, std::regex is good enough
checking for LSB description... Ubuntu 18.04.4 LTS
checking for revision... error: object directory /var/lib/jenkins/gitcache/OpenModelica.git/objects does not exist; check .git/objects/info/alternates.
error: object directory /var/lib/jenkins/gitcache/OpenModelica.git/objects does not exist; check .git/objects/info/alternates.
OMEdit v1.17.0-v1.17.0.9+gf1024952
configure: creating ./config.status
config.status: creating Makefile.unix
config.status: creating omc_config.h
config.status: creating OMEditLIB/OMEditLIB.unix.config.pri
config.status: creating OMEditLIB/Debugger/Parser/Makefile.unix
config.status: creating OMEditLIB/Debugger/Parser/Makefile.lib.unix
config.status: creating OMEditGUI/OMEditGUI.unix.config.pri
config.status: creating Testsuite/Makefile.unix
=== configuring in OMNotebook (/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMNotebook)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/install'  'CC=clang' 'CXX=clang++' 'FC=gfortran' 'CFLAGS=-Os' '--with-cppruntime' '--without-omc' '--without-omlibrary' '--with-omniORB' '--enable-modelica3d' '--without-hwloc' '--with-ombuilddir=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build' --cache-file=/dev/null --srcdir=.
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for gcc... clang
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether clang accepts -g... yes
checking for clang option to accept ISO C89... none needed
checking whether we are using the GNU C++ compiler... yes
checking whether clang++ accepts -g... yes
checking whether clang++ supports C++11 features by default... yes
checking for qmake in env.vars QMAKE and QTDIR... no
checking for qmake... qmake
checking for qmake arguments... qmake -qt5
checking for lrelease... /usr/lib/qt5/bin/lrelease
build_short: x86_64-linux-gnu
host_short: x86_64-linux-gnu
checking for OPENMODELICAHOME... /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build
configure: creating ./config.status
config.status: creating Makefile
config.status: creating OMNotebook/OMNotebookGUI/Makefile.unix
config.status: creating OMNotebook/OMNotebookGUI/OMNotebook.config
config.status: creating OMNotebook/OMNotebookGUI/omc_config.h
=== configuring in OMShell (/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMShell)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/install'  'CC=clang' 'CXX=clang++' 'FC=gfortran' 'CFLAGS=-Os' '--with-cppruntime' '--without-omc' '--without-omlibrary' '--with-omniORB' '--enable-modelica3d' '--without-hwloc' '--with-ombuilddir=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build' --cache-file=/dev/null --srcdir=.
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether clang++ accepts -g... yes
checking for gcc... clang
checking whether we are using the GNU C compiler... yes
checking whether clang accepts -g... yes
checking for clang option to accept ISO C89... none needed
checking whether clang++ supports C++11 features by default... yes
checking for qmake in env.vars QMAKE and QTDIR... no
checking for qmake... qmake
checking for qmake arguments... qmake -qt5
checking for lrelease... /usr/lib/qt5/bin/lrelease
build_short: x86_64-linux-gnu
host_short: x86_64-linux-gnu
checking for OPENMODELICAHOME... /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build
checking if the user wants to compile OMShell-terminal... yes
checking how to run the C++ preprocessor... clang++ -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking readline/readline.h usability... yes
checking readline/readline.h presence... yes
checking for readline/readline.h... yes
checking readline/history.h usability... yes
checking readline/history.h presence... yes
checking for readline/history.h... yes
checking for library containing readline... -lreadline
configure: creating ./config.status
config.status: creating Makefile
config.status: creating OMShell/OMShellGUI/Makefile.unix
config.status: creating OMShell/OMShellGUI/OMShell.config
config.status: creating mosh/src/Makefile
config.status: creating OMShell/OMShellGUI/omc_config.h
config.status: creating mosh/src/omc_config.h
=== configuring in OMSens_Qt (/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMSens_Qt)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/install'  'CC=clang' 'CXX=clang++' 'FC=gfortran' 'CFLAGS=-Os' '--with-cppruntime' '--without-omc' '--without-omlibrary' '--with-omniORB' '--enable-modelica3d' '--without-hwloc' '--with-ombuilddir=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build' --cache-file=/dev/null --srcdir=.
ln: failed to create symbolic link '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/.git/modules/OMSens_Qt/hooks/pre-commit': File exists
configure: OpenModelica commit-msg hook has been installed
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for gcc... clang
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether clang accepts -g... yes
checking for clang option to accept ISO C89... none needed
checking whether we are using the GNU C++ compiler... yes
checking whether clang++ accepts -g... yes
checking whether clang++ supports C++11 features by default... yes
checking for qmake in env.vars QMAKE and QTDIR... no
checking for qmake... qmake
checking for qmake arguments... qmake -qt5
checking for lrelease... /usr/lib/qt5/bin/lrelease
configure: creating ./config.status
config.status: creating Makefile.unix
=== configuring in OMOptim (/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMOptim)
configure: running /bin/bash ./configure --disable-option-checking '--prefix=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/install'  'CC=clang' 'CXX=clang++' 'FC=gfortran' 'CFLAGS=-Os' '--with-cppruntime' '--without-omc' '--without-omlibrary' '--with-omniORB' '--enable-modelica3d' '--without-hwloc' '--with-ombuilddir=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build' --cache-file=/dev/null --srcdir=.
ln: failed to create symbolic link '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/.git/modules/OMOptim/hooks/pre-commit': File exists
configure: OpenModelica commit-msg hook has been installed
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking if clang++ is used (OMOptim breaks clang++)... yes; resetting CXX to default autoconf compiler (sorry). Use ./configure GNUCXX=g++ to use clang++ for some projects and g++ only for paradiseo
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for gcc... clang
checking whether we are using the GNU C compiler... yes
checking whether clang accepts -g... yes
checking for clang option to accept ISO C89... none needed
checking for qmake in env.vars QMAKE and QTDIR... no
checking for qmake... qmake
checking for qmake arguments... qmake -qt5
checking for lrelease... /usr/lib/qt5/bin/lrelease
build_short: x86_64-linux-gnu
host_short: x86_64-linux-gnu
checking for OPENMODELICAHOME... /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build
checking for omniidl... /usr/bin/omniidl
checking for CORBA... omniorb
checking for LSB description... Ubuntu 18.04.4 LTS
checking for revision... OMOptim v1.11.0-dev.beta4.11+gfed1b1a
configure: creating ./config.status
config.status: creating Makefile
config.status: creating OMOptim/build/Makefile.unix
config.status: creating OMOptim/build/OMOptim.config
config.status: creating OMOptimBasis/build/Makefile.unix
config.status: creating OMOptimBasis/build/OMOptimBasis.config
config.status: creating OMOptim/omc_config.h
[Pipeline] sh
+ touch omc.skip omc-diff.skip ReferenceFiles.skip omsimulator.skip omedit.skip omplot.skip omparser.skip
+ make -q omc omc-diff ReferenceFiles omsimulator omedit omplot omparser
test -f omplot.skip || make -C OMPlot
test -f omedit.skip || make -f Makefile.unix -C OMEdit
[Pipeline] sh
+ make -j16 --output-sync=recurse omedit-testsuite
test -f omplot.skip || make -C OMPlot
test -f omedit.skip || make -f Makefile.unix -C OMEdit
make -C testsuite/libraries-for-testing/
make[1]: Entering directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/testsuite/libraries-for-testing'
make clean
make[2]: Entering directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/testsuite/libraries-for-testing'
rm -rf .openmodelica/libraries
make[2]: Leaving directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/testsuite/libraries-for-testing'
mkdir -p .openmodelica/libraries
ls -l .openmodelica/libraries
total 0
../../build/bin/omc -d=showStatement index.mos
Evaluating:   > setEnvironmentVar("HOME", OpenModelica.Scripting.cd())
true
Evaluated:    < 0.111042629 / setEnvironmentVar("HOME", OpenModelica.Scripting.cd())
Evaluating:   > setEnvironmentVar("APPDATA", OpenModelica.Scripting.cd())
true
Evaluated:    < 0.003396468 / setEnvironmentVar("APPDATA", OpenModelica.Scripting.cd())
Evaluating:   > getEnvironmentVar("HOME")
"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/testsuite/libraries-for-testing"
Evaluated:    < 0.003092476 / getEnvironmentVar("HOME")
Evaluating:   > getErrorString()
""
Evaluated:    < 4.0558e-05 / getErrorString()
Evaluating:   > setModelicaPath(OpenModelica.Scripting.cd() + "/.openmodelica/libraries/")
true
Evaluated:    < 0.003792397 / setModelicaPath(OpenModelica.Scripting.cd() + "/.openmodelica/libraries/")
Evaluating:   > getModelicaPath()
"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/testsuite/libraries-for-testing/.openmodelica/libraries/"
Evaluated:    < 0.002944355 / getModelicaPath()
Evaluating:   > echo(false)
Evaluated:    < 0.00306158 / echo(false)
Evaluating:   > OpenModelica.Scripting.mkdir(".openmodelica")
Evaluated:    < 0.003274228 / OpenModelica.Scripting.mkdir(".openmodelica")
Evaluating:   > if not OpenModelica.Scripting.mkdir(".openmodelica/libraries/") then
  print("
mkdir failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.003358808 / if not OpenModelica.Scripting.mkdir(".openmodelica/libraries/") then
  print("
mkdir failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if 0 <> system("cp index.json .openmodelica/libraries/") then
  print("Failed to cp index.json");
  exit(1);
end if;
Evaluated:    < 0.029138065 / if 0 <> system("cp index.json .openmodelica/libraries/") then
  print("Failed to cp index.json");
  exit(1);
end if;
Evaluating:   > if not installPackage(BioChem, "1.0.1+msl.3.2.1", exactMatch = true) then
  print("BioChem 1.0.1+msl.3.2.1 failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 2.442821049 / if not installPackage(BioChem, "1.0.1+msl.3.2.1", exactMatch = true) then
  print("BioChem 1.0.1+msl.3.2.1 failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(Complex, "3.2.3+maint.om", exactMatch = true) then
  print("Complex 3.2.3+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 2.008629241 / if not installPackage(Complex, "3.2.3+maint.om", exactMatch = true) then
  print("Complex 3.2.3+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(Complex, "3.2.2+maint.om", exactMatch = true) then
  print("Complex 3.2.2+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 1.972441163 / if not installPackage(Complex, "3.2.2+maint.om", exactMatch = true) then
  print("Complex 3.2.2+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(Complex, "3.2.1+maint.om", exactMatch = true) then
  print("Complex 3.2.1+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.006342874 / if not installPackage(Complex, "3.2.1+maint.om", exactMatch = true) then
  print("Complex 3.2.1+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(Modelica, "3.2.1+maint.om", exactMatch = true) then
  print("Modelica 3.2.1+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.011785309 / if not installPackage(Modelica, "3.2.1+maint.om", exactMatch = true) then
  print("Modelica 3.2.1+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(Modelica, "3.1.0+maint.om", exactMatch = true) then
  print("Modelica 3.1.0+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 1.540840115 / if not installPackage(Modelica, "3.1.0+maint.om", exactMatch = true) then
  print("Modelica 3.1.0+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(Modelica, "3.2.3+maint.om", exactMatch = true) then
  print("Modelica 3.2.3+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.347868692 / if not installPackage(Modelica, "3.2.3+maint.om", exactMatch = true) then
  print("Modelica 3.2.3+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(Modelica, "3.2.2+maint.om", exactMatch = true) then
  print("Modelica 3.2.2+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.392423157 / if not installPackage(Modelica, "3.2.2+maint.om", exactMatch = true) then
  print("Modelica 3.2.2+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(Modelica, "2.2.2+maint.om", exactMatch = true) then
  print("Modelica 2.2.2+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 1.982481402 / if not installPackage(Modelica, "2.2.2+maint.om", exactMatch = true) then
  print("Modelica 2.2.2+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(ModelicaServices, "3.2.3+maint.om", exactMatch = true) then
  print("ModelicaServices 3.2.3+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.010454413 / if not installPackage(ModelicaServices, "3.2.3+maint.om", exactMatch = true) then
  print("ModelicaServices 3.2.3+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(ModelicaServices, "3.2.1+maint.om", exactMatch = true) then
  print("ModelicaServices 3.2.1+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.012623276 / if not installPackage(ModelicaServices, "3.2.1+maint.om", exactMatch = true) then
  print("ModelicaServices 3.2.1+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(ModelicaServices, "3.2.2+maint.om", exactMatch = true) then
  print("ModelicaServices 3.2.2+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.011186322 / if not installPackage(ModelicaServices, "3.2.2+maint.om", exactMatch = true) then
  print("ModelicaServices 3.2.2+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(ModelicaServices, "1.0.0", exactMatch = true) then
  print("ModelicaServices 1.0.0 failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.008863805000000001 / if not installPackage(ModelicaServices, "1.0.0", exactMatch = true) then
  print("ModelicaServices 1.0.0 failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(ModelicaTest, "3.2.3+maint.om", exactMatch = true) then
  print("ModelicaTest 3.2.3+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.05517295499999997 / if not installPackage(ModelicaTest, "3.2.3+maint.om", exactMatch = true) then
  print("ModelicaTest 3.2.3+maint.om failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(ModelicaCompliance, "3.2.0-master", exactMatch = true) then
  print("ModelicaCompliance 3.2.0-master failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.9540671820000001 / if not installPackage(ModelicaCompliance, "3.2.0-master", exactMatch = true) then
  print("ModelicaCompliance 3.2.0-master failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(Modelica_DeviceDrivers, "1.8.2", exactMatch = true) then
  print("Modelica_DeviceDrivers 1.8.2 failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 3.091090612 / if not installPackage(Modelica_DeviceDrivers, "1.8.2", exactMatch = true) then
  print("Modelica_DeviceDrivers 1.8.2 failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(Modelica_Synchronous, "0.92.2", exactMatch = true) then
  print("Modelica_Synchronous 0.92.2 failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.022047026 / if not installPackage(Modelica_Synchronous, "0.92.2", exactMatch = true) then
  print("Modelica_Synchronous 0.92.2 failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(SiemensPower, "0.0.0-OMCtest", exactMatch = true) then
  print("SiemensPower 0.0.0-OMCtest failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.081926001 / if not installPackage(SiemensPower, "0.0.0-OMCtest", exactMatch = true) then
  print("SiemensPower 0.0.0-OMCtest failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(SiemensPower, "2.1.0-beta", exactMatch = true) then
  print("SiemensPower 2.1.0-beta failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.08523372800000001 / if not installPackage(SiemensPower, "2.1.0-beta", exactMatch = true) then
  print("SiemensPower 2.1.0-beta failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(SiemensPower, "2.2.0", exactMatch = true) then
  print("SiemensPower 2.2.0 failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.094295187 / if not installPackage(SiemensPower, "2.2.0", exactMatch = true) then
  print("SiemensPower 2.2.0 failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(ThermoPower, "3.1.0-master", exactMatch = true) then
  print("ThermoPower 3.1.0-master failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.919646933 / if not installPackage(ThermoPower, "3.1.0-master", exactMatch = true) then
  print("ThermoPower 3.1.0-master failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(ThermoSysPro, "3.2.0", exactMatch = true) then
  print("ThermoSysPro 3.2.0 failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.189926618 / if not installPackage(ThermoSysPro, "3.2.0", exactMatch = true) then
  print("ThermoSysPro 3.2.0 failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > if not installPackage(WasteWater, "2.1.0", exactMatch = true) then
  print("WasteWater 2.1.0 failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluated:    < 0.951982945 / if not installPackage(WasteWater, "2.1.0", exactMatch = true) then
  print("WasteWater 2.1.0 failed
  ");
  print(getErrorString());
  exit(1);
end if;
Evaluating:   > system("touch .openmodelica/libraries/20200610130629.stamp")
Evaluated:    < 0.004706535 / system("touch .openmodelica/libraries/20200610130629.stamp")
make[1]: Leaving directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/testsuite/libraries-for-testing'
make -f Makefile.unix -C OMEdit/Testsuite
make[1]: Entering directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite'
mkdir -p  /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/bin
(cd .. && ./config.status)
config.status: creating Makefile.unix
config.status: creating omc_config.h
config.status: creating OMEditLIB/OMEditLIB.unix.config.pri
config.status: creating OMEditLIB/Debugger/Parser/Makefile.unix
config.status: creating OMEditLIB/Debugger/Parser/Makefile.lib.unix
config.status: creating OMEditGUI/OMEditGUI.unix.config.pri
config.status: creating Testsuite/Makefile.unix
qmake -qt5 -r
Reading /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/BrowseMSL/BrowseMSL.pro
Reading /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Diagram/Diagram.pro
Reading /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Transformation/Transformation.pro
Reading /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Homotopy/Homotopy.pro
make -f Makefile
make[2]: Entering directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite'
cd Transformation/ && ( test -e Makefile || /usr/lib/qt5/bin/qmake -o Makefile /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Transformation/Transformation.pro ) && make -f Makefile 
make[3]: Entering directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Transformation'
clang++ -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -dM -E -o generatedfiles/moc/moc_predefs.h /usr/lib/x86_64-linux-gnu/qt5/mkspecs/features/data/dummy.cpp
/usr/lib/qt5/bin/moc -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Transformation"' --include generatedfiles/moc/moc_predefs.h -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Transformation -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/OMEditLIB -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Common -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -I/usr/include/x86_64-linux-gnu/qt5 -I/usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -I/usr/include/x86_64-linux-gnu/qt5/QtWebKit -I/usr/include/x86_64-linux-gnu/qt5/QtSvg -I/usr/include/x86_64-linux-gnu/qt5/QtOpenGL -I/usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -I/usr/include/x86_64-linux-gnu/qt5/QtWidgets -I/usr/include/x86_64-linux-gnu/qt5/QtGui -I/usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -I/usr/include/x86_64-linux-gnu/qt5/QtNetwork -I/usr/include/x86_64-linux-gnu/qt5/QtXml -I/usr/include/x86_64-linux-gnu/qt5/QtConcurrent -I/usr/include/x86_64-linux-gnu/qt5/QtTest -I/usr/include/x86_64-linux-gnu/qt5/QtCore -I/usr/include/c++/7 -I/usr/include/x86_64-linux-gnu/c++/7 -I/usr/include/c++/7/backward -I/usr/lib/gcc/x86_64-linux-gnu/7/include -I/usr/local/include -I/usr/lib/gcc/x86_64-linux-gnu/7/include-fixed -I/usr/include/x86_64-linux-gnu -I/usr/include TransformationTest.h -o generatedfiles/moc/moc_TransformationTest.cpp
clang++ -c -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Transformation"' -I. -I../.. -I../../OMEditLIB -I../Common -I../../../build/include -I../../../build/include/omplot -I../../../build/include/omplot/qwt -I../../../build/include/omc/c -I../../../build/include/omc/scripting-API -isystem /usr/include/x86_64-linux-gnu/qt5 -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKit -isystem /usr/include/x86_64-linux-gnu/qt5/QtSvg -isystem /usr/include/x86_64-linux-gnu/qt5/QtOpenGL -isystem /usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -isystem /usr/include/x86_64-linux-gnu/qt5/QtWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtGui -isystem /usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -isystem /usr/include/x86_64-linux-gnu/qt5/QtNetwork -isystem /usr/include/x86_64-linux-gnu/qt5/QtXml -isystem /usr/include/x86_64-linux-gnu/qt5/QtConcurrent -isystem /usr/include/x86_64-linux-gnu/qt5/QtTest -isystem /usr/include/x86_64-linux-gnu/qt5/QtCore -Igeneratedfiles/moc -isystem /usr/include/libdrm -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -o moc_TransformationTest.o generatedfiles/moc/moc_TransformationTest.cpp
clang++ -c -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Transformation"' -I. -I../.. -I../../OMEditLIB -I../Common -I../../../build/include -I../../../build/include/omplot -I../../../build/include/omplot/qwt -I../../../build/include/omc/c -I../../../build/include/omc/scripting-API -isystem /usr/include/x86_64-linux-gnu/qt5 -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKit -isystem /usr/include/x86_64-linux-gnu/qt5/QtSvg -isystem /usr/include/x86_64-linux-gnu/qt5/QtOpenGL -isystem /usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -isystem /usr/include/x86_64-linux-gnu/qt5/QtWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtGui -isystem /usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -isystem /usr/include/x86_64-linux-gnu/qt5/QtNetwork -isystem /usr/include/x86_64-linux-gnu/qt5/QtXml -isystem /usr/include/x86_64-linux-gnu/qt5/QtConcurrent -isystem /usr/include/x86_64-linux-gnu/qt5/QtTest -isystem /usr/include/x86_64-linux-gnu/qt5/QtCore -Igeneratedfiles/moc -isystem /usr/include/libdrm -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -o TransformationTest.o TransformationTest.cpp
TransformationTest.cpp:46:1: warning: missing field 'mmc_stack_overflow_jumper' initializer [-Wmissing-field-initializers]
OMEDITTEST_MAIN(TransformationTest)
^
../Common/Util.h:56:3: note: expanded from macro 'OMEDITTEST_MAIN'
  MMC_TRY_TOP() \
  ^
../../../build/include/omc/c/util/../meta/meta_modelica_data.h:219:60: note: expanded from macro 'MMC_TRY_TOP'
#define MMC_TRY_TOP() { threadData_t threadDataOnStack = {0}, *oldThreadData = (threadData_t*)pthread_getspecific(mmc_thread_data_key),*threadData = &threadDataOnStack; pthread_setspecific(mmc_thread_data_key,threadData); pthread_mutex_init(&threadData->parentMutex,NULL); mmc_init_stackoverflow_fast(threadData, oldThreadData); MMC_TRY_INTERNAL(mmc_jumper) threadData->mmc_stack_overflow_jumper = threadData->mmc_jumper; /* Let the default stack overflow handler be the top-level handler */
                                                           ^
1 warning generated.
clang++ -c -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Transformation"' -I. -I../.. -I../../OMEditLIB -I../Common -I../../../build/include -I../../../build/include/omplot -I../../../build/include/omplot/qwt -I../../../build/include/omc/c -I../../../build/include/omc/scripting-API -isystem /usr/include/x86_64-linux-gnu/qt5 -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKit -isystem /usr/include/x86_64-linux-gnu/qt5/QtSvg -isystem /usr/include/x86_64-linux-gnu/qt5/QtOpenGL -isystem /usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -isystem /usr/include/x86_64-linux-gnu/qt5/QtWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtGui -isystem /usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -isystem /usr/include/x86_64-linux-gnu/qt5/QtNetwork -isystem /usr/include/x86_64-linux-gnu/qt5/QtXml -isystem /usr/include/x86_64-linux-gnu/qt5/QtConcurrent -isystem /usr/include/x86_64-linux-gnu/qt5/QtTest -isystem /usr/include/x86_64-linux-gnu/qt5/QtCore -Igeneratedfiles/moc -isystem /usr/include/libdrm -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -o Util.o ../Common/Util.cpp
clang++ -Wl,-rpath-link,/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/lib/x86_64-linux-gnu/omc -rdynamic -Wl,-rpath-link,/usr/lib/x86_64-linux-gnu -o ../../bin/tests/Transformation Util.o TransformationTest.o moc_TransformationTest.o   -L../../bin -lOMEdit -L/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/lib/x86_64-linux-gnu/omc -lOMPlot -lomqwt -lfmilib_shared -L../..//OMEditLIB/Debugger/Parser -lGDBMIParser -lomcparserantlr4 -lomantlr3 -Wl,-z,origin -Wl,-rpath,'$ORIGIN/../lib/x86_64-linux-gnu/omc' -Wl,-rpath,'$ORIGIN/../lib' -Wl,-rpath,'$ORIGIN' -lOpenModelicaCompiler -lOpenModelicaRuntimeC -lomcruntime -lomcgc -losg -losgViewer -losgDB -losgGA -lOpenThreads -lomopcua -L/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/lib -lOMSimulator -lqjson -lQt5WebKitWidgets -lQt5WebKit -lQt5Svg -lQt5OpenGL -lQt5PrintSupport -lQt5Widgets -lQt5Gui -lQt5XmlPatterns -lQt5Network -lQt5Xml -lQt5Concurrent -lQt5Test -lQt5Core -lGL -lpthread 
make[3]: Leaving directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Transformation'
cd Diagram/ && ( test -e Makefile || /usr/lib/qt5/bin/qmake -o Makefile /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Diagram/Diagram.pro ) && make -f Makefile 
make[3]: Entering directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Diagram'
clang++ -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -dM -E -o generatedfiles/moc/moc_predefs.h /usr/lib/x86_64-linux-gnu/qt5/mkspecs/features/data/dummy.cpp
/usr/lib/qt5/bin/moc -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Diagram"' --include generatedfiles/moc/moc_predefs.h -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Diagram -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/OMEditLIB -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Common -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -I/usr/include/x86_64-linux-gnu/qt5 -I/usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -I/usr/include/x86_64-linux-gnu/qt5/QtWebKit -I/usr/include/x86_64-linux-gnu/qt5/QtSvg -I/usr/include/x86_64-linux-gnu/qt5/QtOpenGL -I/usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -I/usr/include/x86_64-linux-gnu/qt5/QtWidgets -I/usr/include/x86_64-linux-gnu/qt5/QtGui -I/usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -I/usr/include/x86_64-linux-gnu/qt5/QtNetwork -I/usr/include/x86_64-linux-gnu/qt5/QtXml -I/usr/include/x86_64-linux-gnu/qt5/QtConcurrent -I/usr/include/x86_64-linux-gnu/qt5/QtTest -I/usr/include/x86_64-linux-gnu/qt5/QtCore -I/usr/include/c++/7 -I/usr/include/x86_64-linux-gnu/c++/7 -I/usr/include/c++/7/backward -I/usr/lib/gcc/x86_64-linux-gnu/7/include -I/usr/local/include -I/usr/lib/gcc/x86_64-linux-gnu/7/include-fixed -I/usr/include/x86_64-linux-gnu -I/usr/include Diagram.h -o generatedfiles/moc/moc_Diagram.cpp
clang++ -c -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Diagram"' -I. -I../.. -I../../OMEditLIB -I../Common -I../../../build/include -I../../../build/include/omplot -I../../../build/include/omplot/qwt -I../../../build/include/omc/c -I../../../build/include/omc/scripting-API -isystem /usr/include/x86_64-linux-gnu/qt5 -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKit -isystem /usr/include/x86_64-linux-gnu/qt5/QtSvg -isystem /usr/include/x86_64-linux-gnu/qt5/QtOpenGL -isystem /usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -isystem /usr/include/x86_64-linux-gnu/qt5/QtWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtGui -isystem /usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -isystem /usr/include/x86_64-linux-gnu/qt5/QtNetwork -isystem /usr/include/x86_64-linux-gnu/qt5/QtXml -isystem /usr/include/x86_64-linux-gnu/qt5/QtConcurrent -isystem /usr/include/x86_64-linux-gnu/qt5/QtTest -isystem /usr/include/x86_64-linux-gnu/qt5/QtCore -Igeneratedfiles/moc -isystem /usr/include/libdrm -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -o moc_Diagram.o generatedfiles/moc/moc_Diagram.cpp
clang++ -c -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Diagram"' -I. -I../.. -I../../OMEditLIB -I../Common -I../../../build/include -I../../../build/include/omplot -I../../../build/include/omplot/qwt -I../../../build/include/omc/c -I../../../build/include/omc/scripting-API -isystem /usr/include/x86_64-linux-gnu/qt5 -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKit -isystem /usr/include/x86_64-linux-gnu/qt5/QtSvg -isystem /usr/include/x86_64-linux-gnu/qt5/QtOpenGL -isystem /usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -isystem /usr/include/x86_64-linux-gnu/qt5/QtWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtGui -isystem /usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -isystem /usr/include/x86_64-linux-gnu/qt5/QtNetwork -isystem /usr/include/x86_64-linux-gnu/qt5/QtXml -isystem /usr/include/x86_64-linux-gnu/qt5/QtConcurrent -isystem /usr/include/x86_64-linux-gnu/qt5/QtTest -isystem /usr/include/x86_64-linux-gnu/qt5/QtCore -Igeneratedfiles/moc -isystem /usr/include/libdrm -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -o Diagram.o Diagram.cpp
Diagram.cpp:46:1: warning: missing field 'mmc_stack_overflow_jumper' initializer [-Wmissing-field-initializers]
OMEDITTEST_MAIN(Diagram)
^
../Common/Util.h:56:3: note: expanded from macro 'OMEDITTEST_MAIN'
  MMC_TRY_TOP() \
  ^
../../../build/include/omc/c/util/../meta/meta_modelica_data.h:219:60: note: expanded from macro 'MMC_TRY_TOP'
#define MMC_TRY_TOP() { threadData_t threadDataOnStack = {0}, *oldThreadData = (threadData_t*)pthread_getspecific(mmc_thread_data_key),*threadData = &threadDataOnStack; pthread_setspecific(mmc_thread_data_key,threadData); pthread_mutex_init(&threadData->parentMutex,NULL); mmc_init_stackoverflow_fast(threadData, oldThreadData); MMC_TRY_INTERNAL(mmc_jumper) threadData->mmc_stack_overflow_jumper = threadData->mmc_jumper; /* Let the default stack overflow handler be the top-level handler */
                                                           ^
1 warning generated.
clang++ -c -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Diagram"' -I. -I../.. -I../../OMEditLIB -I../Common -I../../../build/include -I../../../build/include/omplot -I../../../build/include/omplot/qwt -I../../../build/include/omc/c -I../../../build/include/omc/scripting-API -isystem /usr/include/x86_64-linux-gnu/qt5 -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKit -isystem /usr/include/x86_64-linux-gnu/qt5/QtSvg -isystem /usr/include/x86_64-linux-gnu/qt5/QtOpenGL -isystem /usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -isystem /usr/include/x86_64-linux-gnu/qt5/QtWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtGui -isystem /usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -isystem /usr/include/x86_64-linux-gnu/qt5/QtNetwork -isystem /usr/include/x86_64-linux-gnu/qt5/QtXml -isystem /usr/include/x86_64-linux-gnu/qt5/QtConcurrent -isystem /usr/include/x86_64-linux-gnu/qt5/QtTest -isystem /usr/include/x86_64-linux-gnu/qt5/QtCore -Igeneratedfiles/moc -isystem /usr/include/libdrm -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -o Util.o ../Common/Util.cpp
clang++ -Wl,-rpath-link,/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/lib/x86_64-linux-gnu/omc -rdynamic -Wl,-rpath-link,/usr/lib/x86_64-linux-gnu -o ../../bin/tests/Diagram Util.o Diagram.o moc_Diagram.o   -L../../bin -lOMEdit -L/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/lib/x86_64-linux-gnu/omc -lOMPlot -lomqwt -lfmilib_shared -L../..//OMEditLIB/Debugger/Parser -lGDBMIParser -lomcparserantlr4 -lomantlr3 -Wl,-z,origin -Wl,-rpath,'$ORIGIN/../lib/x86_64-linux-gnu/omc' -Wl,-rpath,'$ORIGIN/../lib' -Wl,-rpath,'$ORIGIN' -lOpenModelicaCompiler -lOpenModelicaRuntimeC -lomcruntime -lomcgc -losg -losgViewer -losgDB -losgGA -lOpenThreads -lomopcua -L/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/lib -lOMSimulator -lqjson -lQt5WebKitWidgets -lQt5WebKit -lQt5Svg -lQt5OpenGL -lQt5PrintSupport -lQt5Widgets -lQt5Gui -lQt5XmlPatterns -lQt5Network -lQt5Xml -lQt5Concurrent -lQt5Test -lQt5Core -lGL -lpthread 
make[3]: Leaving directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Diagram'
cd BrowseMSL/ && ( test -e Makefile || /usr/lib/qt5/bin/qmake -o Makefile /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/BrowseMSL/BrowseMSL.pro ) && make -f Makefile 
make[3]: Entering directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/BrowseMSL'
clang++ -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -dM -E -o generatedfiles/moc/moc_predefs.h /usr/lib/x86_64-linux-gnu/qt5/mkspecs/features/data/dummy.cpp
/usr/lib/qt5/bin/moc -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/BrowseMSL"' --include generatedfiles/moc/moc_predefs.h -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/BrowseMSL -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/OMEditLIB -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Common -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -I/usr/include/x86_64-linux-gnu/qt5 -I/usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -I/usr/include/x86_64-linux-gnu/qt5/QtWebKit -I/usr/include/x86_64-linux-gnu/qt5/QtSvg -I/usr/include/x86_64-linux-gnu/qt5/QtOpenGL -I/usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -I/usr/include/x86_64-linux-gnu/qt5/QtWidgets -I/usr/include/x86_64-linux-gnu/qt5/QtGui -I/usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -I/usr/include/x86_64-linux-gnu/qt5/QtNetwork -I/usr/include/x86_64-linux-gnu/qt5/QtXml -I/usr/include/x86_64-linux-gnu/qt5/QtConcurrent -I/usr/include/x86_64-linux-gnu/qt5/QtTest -I/usr/include/x86_64-linux-gnu/qt5/QtCore -I/usr/include/c++/7 -I/usr/include/x86_64-linux-gnu/c++/7 -I/usr/include/c++/7/backward -I/usr/lib/gcc/x86_64-linux-gnu/7/include -I/usr/local/include -I/usr/lib/gcc/x86_64-linux-gnu/7/include-fixed -I/usr/include/x86_64-linux-gnu -I/usr/include BrowseMSL.h -o generatedfiles/moc/moc_BrowseMSL.cpp
clang++ -c -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/BrowseMSL"' -I. -I../.. -I../../OMEditLIB -I../Common -I../../../build/include -I../../../build/include/omplot -I../../../build/include/omplot/qwt -I../../../build/include/omc/c -I../../../build/include/omc/scripting-API -isystem /usr/include/x86_64-linux-gnu/qt5 -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKit -isystem /usr/include/x86_64-linux-gnu/qt5/QtSvg -isystem /usr/include/x86_64-linux-gnu/qt5/QtOpenGL -isystem /usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -isystem /usr/include/x86_64-linux-gnu/qt5/QtWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtGui -isystem /usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -isystem /usr/include/x86_64-linux-gnu/qt5/QtNetwork -isystem /usr/include/x86_64-linux-gnu/qt5/QtXml -isystem /usr/include/x86_64-linux-gnu/qt5/QtConcurrent -isystem /usr/include/x86_64-linux-gnu/qt5/QtTest -isystem /usr/include/x86_64-linux-gnu/qt5/QtCore -Igeneratedfiles/moc -isystem /usr/include/libdrm -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -o moc_BrowseMSL.o generatedfiles/moc/moc_BrowseMSL.cpp
clang++ -c -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/BrowseMSL"' -I. -I../.. -I../../OMEditLIB -I../Common -I../../../build/include -I../../../build/include/omplot -I../../../build/include/omplot/qwt -I../../../build/include/omc/c -I../../../build/include/omc/scripting-API -isystem /usr/include/x86_64-linux-gnu/qt5 -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKit -isystem /usr/include/x86_64-linux-gnu/qt5/QtSvg -isystem /usr/include/x86_64-linux-gnu/qt5/QtOpenGL -isystem /usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -isystem /usr/include/x86_64-linux-gnu/qt5/QtWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtGui -isystem /usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -isystem /usr/include/x86_64-linux-gnu/qt5/QtNetwork -isystem /usr/include/x86_64-linux-gnu/qt5/QtXml -isystem /usr/include/x86_64-linux-gnu/qt5/QtConcurrent -isystem /usr/include/x86_64-linux-gnu/qt5/QtTest -isystem /usr/include/x86_64-linux-gnu/qt5/QtCore -Igeneratedfiles/moc -isystem /usr/include/libdrm -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -o BrowseMSL.o BrowseMSL.cpp
BrowseMSL.cpp:46:1: warning: missing field 'mmc_stack_overflow_jumper' initializer [-Wmissing-field-initializers]
OMEDITTEST_MAIN(BrowseMSL)
^
../Common/Util.h:56:3: note: expanded from macro 'OMEDITTEST_MAIN'
  MMC_TRY_TOP() \
  ^
../../../build/include/omc/c/util/../meta/meta_modelica_data.h:219:60: note: expanded from macro 'MMC_TRY_TOP'
#define MMC_TRY_TOP() { threadData_t threadDataOnStack = {0}, *oldThreadData = (threadData_t*)pthread_getspecific(mmc_thread_data_key),*threadData = &threadDataOnStack; pthread_setspecific(mmc_thread_data_key,threadData); pthread_mutex_init(&threadData->parentMutex,NULL); mmc_init_stackoverflow_fast(threadData, oldThreadData); MMC_TRY_INTERNAL(mmc_jumper) threadData->mmc_stack_overflow_jumper = threadData->mmc_jumper; /* Let the default stack overflow handler be the top-level handler */
                                                           ^
1 warning generated.
clang++ -c -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/BrowseMSL"' -I. -I../.. -I../../OMEditLIB -I../Common -I../../../build/include -I../../../build/include/omplot -I../../../build/include/omplot/qwt -I../../../build/include/omc/c -I../../../build/include/omc/scripting-API -isystem /usr/include/x86_64-linux-gnu/qt5 -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKit -isystem /usr/include/x86_64-linux-gnu/qt5/QtSvg -isystem /usr/include/x86_64-linux-gnu/qt5/QtOpenGL -isystem /usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -isystem /usr/include/x86_64-linux-gnu/qt5/QtWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtGui -isystem /usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -isystem /usr/include/x86_64-linux-gnu/qt5/QtNetwork -isystem /usr/include/x86_64-linux-gnu/qt5/QtXml -isystem /usr/include/x86_64-linux-gnu/qt5/QtConcurrent -isystem /usr/include/x86_64-linux-gnu/qt5/QtTest -isystem /usr/include/x86_64-linux-gnu/qt5/QtCore -Igeneratedfiles/moc -isystem /usr/include/libdrm -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -o Util.o ../Common/Util.cpp
clang++ -Wl,-rpath-link,/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/lib/x86_64-linux-gnu/omc -rdynamic -Wl,-rpath-link,/usr/lib/x86_64-linux-gnu -o ../../bin/tests/BrowseMSL Util.o BrowseMSL.o moc_BrowseMSL.o   -L../../bin -lOMEdit -L/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/lib/x86_64-linux-gnu/omc -lOMPlot -lomqwt -lfmilib_shared -L../..//OMEditLIB/Debugger/Parser -lGDBMIParser -lomcparserantlr4 -lomantlr3 -Wl,-z,origin -Wl,-rpath,'$ORIGIN/../lib/x86_64-linux-gnu/omc' -Wl,-rpath,'$ORIGIN/../lib' -Wl,-rpath,'$ORIGIN' -lOpenModelicaCompiler -lOpenModelicaRuntimeC -lomcruntime -lomcgc -losg -losgViewer -losgDB -losgGA -lOpenThreads -lomopcua -L/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/lib -lOMSimulator -lqjson -lQt5WebKitWidgets -lQt5WebKit -lQt5Svg -lQt5OpenGL -lQt5PrintSupport -lQt5Widgets -lQt5Gui -lQt5XmlPatterns -lQt5Network -lQt5Xml -lQt5Concurrent -lQt5Test -lQt5Core -lGL -lpthread 
make[3]: Leaving directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/BrowseMSL'
cd Homotopy/ && ( test -e Makefile || /usr/lib/qt5/bin/qmake -o Makefile /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Homotopy/Homotopy.pro ) && make -f Makefile 
make[3]: Entering directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Homotopy'
clang++ -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -dM -E -o generatedfiles/moc/moc_predefs.h /usr/lib/x86_64-linux-gnu/qt5/mkspecs/features/data/dummy.cpp
/usr/lib/qt5/bin/moc -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Homotopy"' --include generatedfiles/moc/moc_predefs.h -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Homotopy -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/OMEditLIB -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Common -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -I/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -I/usr/include/x86_64-linux-gnu/qt5 -I/usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -I/usr/include/x86_64-linux-gnu/qt5/QtWebKit -I/usr/include/x86_64-linux-gnu/qt5/QtSvg -I/usr/include/x86_64-linux-gnu/qt5/QtOpenGL -I/usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -I/usr/include/x86_64-linux-gnu/qt5/QtWidgets -I/usr/include/x86_64-linux-gnu/qt5/QtGui -I/usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -I/usr/include/x86_64-linux-gnu/qt5/QtNetwork -I/usr/include/x86_64-linux-gnu/qt5/QtXml -I/usr/include/x86_64-linux-gnu/qt5/QtConcurrent -I/usr/include/x86_64-linux-gnu/qt5/QtTest -I/usr/include/x86_64-linux-gnu/qt5/QtCore -I/usr/include/c++/7 -I/usr/include/x86_64-linux-gnu/c++/7 -I/usr/include/c++/7/backward -I/usr/lib/gcc/x86_64-linux-gnu/7/include -I/usr/local/include -I/usr/lib/gcc/x86_64-linux-gnu/7/include-fixed -I/usr/include/x86_64-linux-gnu -I/usr/include HomotopyTest.h -o generatedfiles/moc/moc_HomotopyTest.cpp
clang++ -c -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Homotopy"' -I. -I../.. -I../../OMEditLIB -I../Common -I../../../build/include -I../../../build/include/omplot -I../../../build/include/omplot/qwt -I../../../build/include/omc/c -I../../../build/include/omc/scripting-API -isystem /usr/include/x86_64-linux-gnu/qt5 -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKit -isystem /usr/include/x86_64-linux-gnu/qt5/QtSvg -isystem /usr/include/x86_64-linux-gnu/qt5/QtOpenGL -isystem /usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -isystem /usr/include/x86_64-linux-gnu/qt5/QtWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtGui -isystem /usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -isystem /usr/include/x86_64-linux-gnu/qt5/QtNetwork -isystem /usr/include/x86_64-linux-gnu/qt5/QtXml -isystem /usr/include/x86_64-linux-gnu/qt5/QtConcurrent -isystem /usr/include/x86_64-linux-gnu/qt5/QtTest -isystem /usr/include/x86_64-linux-gnu/qt5/QtCore -Igeneratedfiles/moc -isystem /usr/include/libdrm -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -o moc_HomotopyTest.o generatedfiles/moc/moc_HomotopyTest.cpp
clang++ -c -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Homotopy"' -I. -I../.. -I../../OMEditLIB -I../Common -I../../../build/include -I../../../build/include/omplot -I../../../build/include/omplot/qwt -I../../../build/include/omc/c -I../../../build/include/omc/scripting-API -isystem /usr/include/x86_64-linux-gnu/qt5 -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKit -isystem /usr/include/x86_64-linux-gnu/qt5/QtSvg -isystem /usr/include/x86_64-linux-gnu/qt5/QtOpenGL -isystem /usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -isystem /usr/include/x86_64-linux-gnu/qt5/QtWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtGui -isystem /usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -isystem /usr/include/x86_64-linux-gnu/qt5/QtNetwork -isystem /usr/include/x86_64-linux-gnu/qt5/QtXml -isystem /usr/include/x86_64-linux-gnu/qt5/QtConcurrent -isystem /usr/include/x86_64-linux-gnu/qt5/QtTest -isystem /usr/include/x86_64-linux-gnu/qt5/QtCore -Igeneratedfiles/moc -isystem /usr/include/libdrm -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -o Util.o ../Common/Util.cpp
clang++ -c -Os -g -isystem ../../ -isystem ../../OMEditLIB -isystem ../Common -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omplot/qwt -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/c -isystem /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/include/omc/scripting-API -Wall -W -D_REENTRANT -fPIC -DQT_NO_DEBUG -DQT_WEBKITWIDGETS_LIB -DQT_WEBKIT_LIB -DQT_SVG_LIB -DQT_OPENGL_LIB -DQT_PRINTSUPPORT_LIB -DQT_WIDGETS_LIB -DQT_GUI_LIB -DQT_XMLPATTERNS_LIB -DQT_NETWORK_LIB -DQT_XML_LIB -DQT_CONCURRENT_LIB -DQT_TESTLIB_LIB -DQT_CORE_LIB -DQT_TESTCASE_BUILDDIR='"/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Homotopy"' -I. -I../.. -I../../OMEditLIB -I../Common -I../../../build/include -I../../../build/include/omplot -I../../../build/include/omplot/qwt -I../../../build/include/omc/c -I../../../build/include/omc/scripting-API -isystem /usr/include/x86_64-linux-gnu/qt5 -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKitWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtWebKit -isystem /usr/include/x86_64-linux-gnu/qt5/QtSvg -isystem /usr/include/x86_64-linux-gnu/qt5/QtOpenGL -isystem /usr/include/x86_64-linux-gnu/qt5/QtPrintSupport -isystem /usr/include/x86_64-linux-gnu/qt5/QtWidgets -isystem /usr/include/x86_64-linux-gnu/qt5/QtGui -isystem /usr/include/x86_64-linux-gnu/qt5/QtXmlPatterns -isystem /usr/include/x86_64-linux-gnu/qt5/QtNetwork -isystem /usr/include/x86_64-linux-gnu/qt5/QtXml -isystem /usr/include/x86_64-linux-gnu/qt5/QtConcurrent -isystem /usr/include/x86_64-linux-gnu/qt5/QtTest -isystem /usr/include/x86_64-linux-gnu/qt5/QtCore -Igeneratedfiles/moc -isystem /usr/include/libdrm -I/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++ -o HomotopyTest.o HomotopyTest.cpp
HomotopyTest.cpp:49:1: warning: missing field 'mmc_stack_overflow_jumper' initializer [-Wmissing-field-initializers]
OMEDITTEST_MAIN(HomotopyTest)
^
../Common/Util.h:56:3: note: expanded from macro 'OMEDITTEST_MAIN'
  MMC_TRY_TOP() \
  ^
../../../build/include/omc/c/util/../meta/meta_modelica_data.h:219:60: note: expanded from macro 'MMC_TRY_TOP'
#define MMC_TRY_TOP() { threadData_t threadDataOnStack = {0}, *oldThreadData = (threadData_t*)pthread_getspecific(mmc_thread_data_key),*threadData = &threadDataOnStack; pthread_setspecific(mmc_thread_data_key,threadData); pthread_mutex_init(&threadData->parentMutex,NULL); mmc_init_stackoverflow_fast(threadData, oldThreadData); MMC_TRY_INTERNAL(mmc_jumper) threadData->mmc_stack_overflow_jumper = threadData->mmc_jumper; /* Let the default stack overflow handler be the top-level handler */
                                                           ^
1 warning generated.
clang++ -Wl,-rpath-link,/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/lib/x86_64-linux-gnu/omc -rdynamic -Wl,-rpath-link,/usr/lib/x86_64-linux-gnu -o ../../bin/tests/Homotopy Util.o HomotopyTest.o moc_HomotopyTest.o   -L../../bin -lOMEdit -L/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/lib/x86_64-linux-gnu/omc -lOMPlot -lomqwt -lfmilib_shared -L../..//OMEditLIB/Debugger/Parser -lGDBMIParser -lomcparserantlr4 -lomantlr3 -Wl,-z,origin -Wl,-rpath,'$ORIGIN/../lib/x86_64-linux-gnu/omc' -Wl,-rpath,'$ORIGIN/../lib' -Wl,-rpath,'$ORIGIN' -lOpenModelicaCompiler -lOpenModelicaRuntimeC -lomcruntime -lomcgc -losg -losgViewer -losgDB -losgGA -lOpenThreads -lomopcua -L/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/lib -lOMSimulator -lqjson -lQt5WebKitWidgets -lQt5WebKit -lQt5Svg -lQt5OpenGL -lQt5PrintSupport -lQt5Widgets -lQt5Gui -lQt5XmlPatterns -lQt5Network -lQt5Xml -lQt5Concurrent -lQt5Test -lQt5Core -lGL -lpthread 
make[3]: Leaving directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite/Homotopy'
make[2]: Leaving directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite'
cp -p ../bin/tests/* /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/bin
cp -p RunOMEditTestsuite.sh /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/bin
make[1]: Leaving directory '/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/OMEdit/Testsuite'
[Pipeline] sh
+ HOME=/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/testsuite/libraries-for-testing
+ cd build/bin
+ xvfb-run ./RunOMEditTestsuite.sh
Running testcase BrowseMSL
QStandardPaths: error creating runtime directory /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/bin/OMEditTestResult/BrowseMSL/runtime-: No such file or directory
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
********* Start testing of BrowseMSL *********
Config: Using QtTest library 5.9.5, Qt 5.9.5 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 7.4.0)
PASS   : BrowseMSL::initTestCase()
PASS   : BrowseMSL::electricalAnalogBasic()
SKIP   : BrowseMSL::mediaAir() Enable this testcase by removing this line once the ticket#5669 (https://trac.openmodelica.org/OpenModelica/ticket/5669) is fixed.
   Loc: [BrowseMSL.cpp(57)]
PASS   : BrowseMSL::cleanupTestCase()
Totals: 3 passed, 0 failed, 1 skipped, 0 blacklisted, 2844ms
********* Finished testing of BrowseMSL *********
info:    Logging information has been saved to "/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/bin/OMEditTestResult/BrowseMSL/OpenModelica_nobody/OMEdit//omslog.txt"
Running testcase Diagram
QStandardPaths: error creating runtime directory /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/bin/OMEditTestResult/Diagram/runtime-: No such file or directory
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
********* Start testing of Diagram *********
Config: Using QtTest library 5.9.5, Qt 5.9.5 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 7.4.0)
PASS   : Diagram::initTestCase()
PASS   : Diagram::chuaCircuit()
PASS   : Diagram::cleanupTestCase()
Totals: 3 passed, 0 failed, 0 skipped, 0 blacklisted, 3897ms
********* Finished testing of Diagram *********
info:    Logging information has been saved to "/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/bin/OMEditTestResult/Diagram/OpenModelica_nobody/OMEdit//omslog.txt"
Running testcase Transformation
QStandardPaths: error creating runtime directory /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/bin/OMEditTestResult/Transformation/runtime-: No such file or directory
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
********* Start testing of TransformationTest *********
Config: Using QtTest library 5.9.5, Qt 5.9.5 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 7.4.0)
PASS   : TransformationTest::initTestCase()
QDEBUG : TransformationTest::wrongPlacementAnnotation() "The placement annotation string format is wrong. Received {Placement(true,-,{{-140.0, 40.0}, {-100.0, 80.0}},-,-,-,)}"
PASS   : TransformationTest::wrongPlacementAnnotation()
PASS   : TransformationTest::correctPlacementAnnotation()
PASS   : TransformationTest::cleanupTestCase()
Totals: 4 passed, 0 failed, 0 skipped, 0 blacklisted, 46ms
********* Finished testing of TransformationTest *********
info:    Logging information has been saved to "/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/bin/OMEditTestResult/Transformation/OpenModelica_nobody/OMEdit//omslog.txt"
Running testcase Homotopy
QStandardPaths: error creating runtime directory /var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/bin/OMEditTestResult/Homotopy/runtime-: No such file or directory
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
********* Start testing of HomotopyTest *********
Config: Using QtTest library 5.9.5, Qt 5.9.5 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 7.4.0)
PASS   : HomotopyTest::initTestCase()
FAIL!  : HomotopyTest::simulateHomotopyTestM1() Failed to find the expected output in the simulation log file i.e., simulation terminated by an assertion at initialization
   Loc: [HomotopyTest.cpp(112)]
PASS   : HomotopyTest::simulateHomotopyTestM2()
PASS   : HomotopyTest::cleanupTestCase()
Totals: 3 passed, 1 failed, 0 skipped, 0 blacklisted, 4631ms
********* Finished testing of HomotopyTest *********
info:    Logging information has been saved to "/var/lib/jenkins1/ws/OpenModelica_maintenance_v1.17/build/bin/OMEditTestResult/Homotopy/OpenModelica_nobody/OMEdit//omslog.txt"
[Pipeline] }
[Pipeline] // script
[Pipeline] }
$ docker stop --time=1 abf8db241d5fcb409ea32206e1c23aca4bcf6b3bd6fdab8405a65d6984675a2f
$ docker rm -f abf8db241d5fcb409ea32206e1c23aca4bcf6b3bd6fdab8405a65d6984675a2f
[Pipeline] // withDockerContainer
[Pipeline] }
[Pipeline] // withEnv
[Pipeline] }
[Pipeline] // node
[Pipeline] }
[Pipeline] // stage
[Pipeline] }
Failed in branch clang-qt5
[Pipeline] // parallel
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (fmuchecker)
Stage "fmuchecker" skipped due to earlier failure(s)
[Pipeline] parallel
[Pipeline] { (Branch: linux-wine-fmuchecker)
[Pipeline] { (Branch: osx-fmuchecker)
[Pipeline] { (Branch: arm-fmuchecker)
[Pipeline] stage
[Pipeline] { (linux-wine-fmuchecker)
[Pipeline] stage
[Pipeline] { (osx-fmuchecker)
[Pipeline] stage
[Pipeline] { (arm-fmuchecker)
Stage "linux-wine-fmuchecker" skipped due to earlier failure(s)
[Pipeline] }
Stage "osx-fmuchecker" skipped due to earlier failure(s)
[Pipeline] }
Stage "arm-fmuchecker" skipped due to earlier failure(s)
[Pipeline] }
[Pipeline] // stage
[Pipeline] // stage
[Pipeline] // stage
[Pipeline] }
Failed in branch linux-wine-fmuchecker
[Pipeline] }
Failed in branch osx-fmuchecker
[Pipeline] }
Failed in branch arm-fmuchecker
[Pipeline] // parallel
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (check-and-upload)
Stage "check-and-upload" skipped due to earlier failure(s)
[Pipeline] parallel
[Pipeline] { (Branch: fmuchecker-results)
[Pipeline] { (Branch: upload-compliance)
[Pipeline] { (Branch: upload-doc)
[Pipeline] stage
[Pipeline] { (fmuchecker-results)
[Pipeline] stage
[Pipeline] { (upload-compliance)
[Pipeline] stage
[Pipeline] { (upload-doc)
Stage "fmuchecker-results" skipped due to earlier failure(s)
[Pipeline] }
Stage "upload-compliance" skipped due to earlier failure(s)
[Pipeline] }
Stage "upload-doc" skipped due to earlier failure(s)
[Pipeline] }
[Pipeline] // stage
[Pipeline] // stage
[Pipeline] // stage
[Pipeline] }
Failed in branch fmuchecker-results
[Pipeline] }
Failed in branch upload-compliance
[Pipeline] }
Failed in branch upload-doc
[Pipeline] // parallel
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (push-to-master)
Stage "push-to-master" skipped due to earlier failure(s)
[Pipeline] }
[Pipeline] // stage
[Pipeline] stage
[Pipeline] { (Declarative: Post Actions)
[Pipeline] script
[Pipeline] {
[Pipeline] }
[Pipeline] // script
[Pipeline] }
[Pipeline] // stage
[Pipeline] }
[Pipeline] // withEnv
[Pipeline] End of Pipeline

GitHub has been notified of this commit’s build result

ERROR: script returned exit code 1
Finished: FAILURE