![[Jenkins]](/jenkins/static/7b8bca15/images/svgs/logo.svg){kind=logo}
Failed
tests / testsuite-gcc / simulation_modelica_records.ATotal.mos (from (result.xml))
Stacktrace
Output mismatch (see stdout for details)
Standard Output
+ ATotal.mos ... equation mismatch [time: 4]
==== Log /tmp/omc-rtest-unknown/simulation/modelica/records/ATotal.mos_temp6252/log-ATotal.mos
true
""
"function Modelica.Electrical.Spice3.Internal.Functions.energyGapDepTemp \"Temperature dependency of energy gap\"
input Real temp(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) \"Temperature\";
output Real ret(quantity = \"ElectricPotential\", unit = \"V\") \"Output voltage\";
algorithm
ret := 1.16 + (-0.000702) * temp ^ 2.0 / (1108.0 + temp);
end Modelica.Electrical.Spice3.Internal.Functions.energyGapDepTemp;
function Modelica.Electrical.Spice3.Internal.Functions.energyGapDepTemp_old \"Temperature dependency of energy gap\"
input Real temp(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) \"Temperature\";
output Real ret(quantity = \"ElectricPotential\", unit = \"V\") \"Output voltage\";
protected Real gap0(quantity = \"ElectricPotential\", unit = \"V\") = 1.16;
protected Real coeff1(unit = \"V/K\") = 0.000702;
protected Real coeff2(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) = 1108.0;
algorithm
ret := gap0 - coeff1 * temp ^ 2.0 / (temp + coeff2);
end Modelica.Electrical.Spice3.Internal.Functions.energyGapDepTemp_old;
function Modelica.Electrical.Spice3.Internal.Functions.junction2SPICE3MOSFET \"Junction current and conductance calculation, obsolete, use junction2SPICE3MOSFETRevised\"
input Real current(quantity = \"ElectricCurrent\", unit = \"A\") \"Input current\";
input Real cond(quantity = \"Conductance\", unit = \"S\") \"Input conductance\";
input Real voltage(quantity = \"ElectricPotential\", unit = \"V\") \"Input voltage\";
input Real temp(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) \"Device Temperature\";
input Real ncoeff;
input Real satcur(quantity = \"ElectricCurrent\", unit = \"A\") \"Saturation current\";
output Real out_current(quantity = \"ElectricCurrent\", unit = \"A\") \"Calculated current\";
output Real out_cond(quantity = \"Conductance\", unit = \"S\") \"Calculated conductance\";
protected Real vte(quantity = \"ElectricPotential\", unit = \"V\");
protected Real max_exponent;
protected Real evbd;
protected Real evd;
protected constant Real max_exp = 50.0;
protected constant Real max_current(quantity = \"ElectricCurrent\", unit = \"A\") = 10000.0;
algorithm
out_current := current;
out_cond := cond;
if satcur > 1e-101 then
vte := 8.61726105451295e-05 * temp * ncoeff;
max_exponent := log(10000.0 / satcur);
max_exponent := min(50.0, max_exponent);
if voltage <= 0.0 then
out_cond := satcur / vte;
out_current := out_cond * voltage;
out_cond := 1e-12 + out_cond;
elseif voltage >= max_exponent * vte then
evd := exp(max_exponent);
out_cond := satcur * evd / vte;
out_current := satcur * (-1.0 + evd) + out_cond * (voltage - max_exponent * vte);
else
evbd := exp(voltage / vte);
out_cond := 1e-12 + satcur * evbd / vte;
out_current := satcur * (-1.0 + evbd);
end if;
else
out_current := 0.0;
out_cond := 0.0;
end if;
end Modelica.Electrical.Spice3.Internal.Functions.junction2SPICE3MOSFET;
function Modelica.Electrical.Spice3.Internal.Functions.junctionCap \"Junction capacity, obsolete, use JunctionCapRevised\"
input Real capin(quantity = \"Capacitance\", unit = \"F\", min = 0.0) \"Input capacitance\";
input Real voltage(quantity = \"ElectricPotential\", unit = \"V\") \"Input voltage\";
input Real depcap(quantity = \"ElectricPotential\", unit = \"V\");
input Real mj;
input Real phij;
input Real f1(quantity = \"ElectricPotential\", unit = \"V\");
input Real f2;
input Real f3;
output Real capout(quantity = \"Capacitance\", unit = \"F\", min = 0.0) \"Output capacitance\";
output Real charge(quantity = \"ElectricCharge\", unit = \"C\") \"Output charge\";
protected Real arg;
protected Real sarg;
protected Real czof2;
algorithm
if voltage < depcap then
arg := 1.0 - voltage / phij;
if mj == 0.5 then
sarg := 1.0 / sqrt(arg);
else
sarg := arg ^ (-mj);
end if;
capout := capin * sarg;
charge := phij * capin * (1.0 - arg * sarg) / (1.0 - mj);
else
czof2 := capin / f2;
capout := czof2 * (f3 + mj * voltage / phij);
charge := capin * f1 + czof2 * (f3 * (voltage - depcap) + 0.5 * mj * (voltage ^ 2.0 - depcap ^ 2.0) / phij);
end if;
end Modelica.Electrical.Spice3.Internal.Functions.junctionCap;
function Modelica.Electrical.Spice3.Internal.Functions.junctionCapCoeffs \"Coefficient calculation\"
input Real mj;
input Real fc;
input Real phij(quantity = \"ElectricPotential\", unit = \"V\");
output Real f1(quantity = \"ElectricPotential\", unit = \"V\");
output Real f2;
output Real f3;
protected Real xfc;
algorithm
xfc := log(1.0 - fc);
f1 := phij * (1.0 - exp((1.0 - mj) * xfc)) / (1.0 - mj);
f2 := exp((1.0 + mj) * xfc);
f3 := 1.0 - fc * (1.0 + mj);
end Modelica.Electrical.Spice3.Internal.Functions.junctionCapCoeffs;
function Modelica.Electrical.Spice3.Internal.Functions.junctionParamDepTempSPICE3 \"Temperature dependency of junction parameters\"
input Real phi0(quantity = \"ElectricPotential\", unit = \"V\");
input Real cap0;
input Real mcoeff;
input Real temp(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) \"Device temperature\";
input Real tnom(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) \"Nominal temperature\";
output Real junctionpot(quantity = \"ElectricPotential\", unit = \"V\") \"Junction potential\";
output Real jucntioncap \"Junction capacitance\";
protected Real phibtemp(quantity = \"ElectricPotential\", unit = \"V\");
protected Real phibtnom(quantity = \"ElectricPotential\", unit = \"V\");
protected Real vt(quantity = \"ElectricPotential\", unit = \"V\");
protected Real vtnom(quantity = \"ElectricPotential\", unit = \"V\");
protected Real arg;
protected Real fact2;
protected Real pbfact;
protected Real arg1;
protected Real fact1;
protected Real pbfact1;
protected Real pbo;
protected Real gmaold;
protected Real gmanew;
algorithm
phibtemp := Modelica.Electrical.Spice3.Internal.Functions.energyGapDepTemp(temp);
phibtnom := Modelica.Electrical.Spice3.Internal.Functions.energyGapDepTemp(tnom);
vt := 8.61726105451295e-05 * temp;
vtnom := 8.61726105451295e-05 * tnom;
arg := 1.345417051337526e+20 + (-3.621481323477592e+22) * phibtemp / temp;
fact2 := 0.003331667499583542 * temp;
pbfact := (-2.0) * vt * (1.5 * log(fact2) + 1.6021918e-19 * arg);
arg1 := 1.345417051337526e+20 + (-3.621481323477592e+22) * phibtnom / tnom;
fact1 := 0.003331667499583542 * tnom;
pbfact1 := (-2.0) * vtnom * (1.5 * log(fact1) + 1.6021918e-19 * arg1);
pbo := (phi0 - pbfact1) / fact1;
junctionpot := pbfact + fact2 * pbo;
gmaold := (phi0 - pbo) / pbo;
gmanew := (junctionpot - pbo) / pbo;
jucntioncap := cap0 * (1.0 + mcoeff * (0.0004 * (-300.15 + temp) - gmanew)) / (1.0 + mcoeff * (0.0004 * (-300.15 + tnom) - gmaold));
end Modelica.Electrical.Spice3.Internal.Functions.junctionParamDepTempSPICE3;
function Modelica.Electrical.Spice3.Internal.Functions.junctionPotDepTemp \"Temperature dependency of junction potential\"
input Real phi0(quantity = \"ElectricPotential\", unit = \"V\");
input Real temp(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) \"Device Temperature\";
input Real tnom(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) \"Nominal Temperature\";
output Real ret(quantity = \"ElectricPotential\", unit = \"V\") \"Output voltage\";
protected Real phibtemp(quantity = \"ElectricPotential\", unit = \"V\");
protected Real phibtnom(quantity = \"ElectricPotential\", unit = \"V\");
protected Real vt(quantity = \"ElectricPotential\", unit = \"V\");
algorithm
phibtemp := Modelica.Electrical.Spice3.Internal.Functions.energyGapDepTemp(temp);
phibtnom := Modelica.Electrical.Spice3.Internal.Functions.energyGapDepTemp(tnom);
vt := 8.61726105451295e-05 * temp;
ret := (phi0 - phibtnom) * temp / tnom + phibtemp + 3.0 * vt * log(tnom / temp);
end Modelica.Electrical.Spice3.Internal.Functions.junctionPotDepTemp;
function Modelica.Electrical.Spice3.Internal.Functions.junctionVCrit \"Voltage limitation\"
input Real temp(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) \"temperature\";
input Real ncoeff;
input Real satcur(quantity = \"ElectricCurrent\", unit = \"A\") \"Saturation current\";
output Real ret \"Output value\";
protected Real vte(quantity = \"ElectricPotential\", unit = \"V\");
algorithm
vte := 8.61726105451295e-05 * temp * ncoeff;
ret := vte * log(0.7071067811865475 * vte / satcur);
ret := if ret > 10000000000.0 then 10000000000.0 else ret;
end Modelica.Electrical.Spice3.Internal.Functions.junctionVCrit;
function Modelica.Electrical.Spice3.Internal.Functions.saturationCurDepTempSPICE3MOSFET \"Temperature dependency of saturation current\"
input Real satcur0(quantity = \"ElectricCurrent\", unit = \"A\") \"Saturation current\";
input Real temp(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) \"Device Temperature\";
input Real tnom(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) \"Nominal Temperature\";
output Real ret \"Output current\";
protected Real vt(quantity = \"ElectricPotential\", unit = \"V\");
protected Real vtnom(quantity = \"ElectricPotential\", unit = \"V\");
protected Real energygaptnom(quantity = \"ElectricPotential\", unit = \"V\");
protected Real energygaptemp(quantity = \"ElectricPotential\", unit = \"V\");
algorithm
vt := 8.61726105451295e-05 * temp;
vtnom := 8.61726105451295e-05 * tnom;
energygaptnom := Modelica.Electrical.Spice3.Internal.Functions.energyGapDepTemp(tnom);
energygaptemp := Modelica.Electrical.Spice3.Internal.Functions.energyGapDepTemp(temp);
ret := satcur0 * exp(energygaptnom / vtnom - energygaptemp / vt);
end Modelica.Electrical.Spice3.Internal.Functions.saturationCurDepTempSPICE3MOSFET;
function Modelica.Electrical.Spice3.Internal.ModelcardMOS \"Automatically generated record constructor for Modelica.Electrical.Spice3.Internal.ModelcardMOS\"
input Real VTO(quantity = \"ElectricPotential\", unit = \"V\") = -1e+40;
input Real KP(quantity = \"Transconductance\", unit = \"A/V2\") = -1e+40;
input Real GAMMA = -1e+40;
input Real PHI(quantity = \"ElectricPotential\", unit = \"V\") = -1e+40;
input Real LAMBDA(quantity = \"InversePotential\", unit = \"1/V\") = 0.0;
input Real RD(quantity = \"Resistance\", unit = \"Ohm\") = -1e+40;
input Real RS(quantity = \"Resistance\", unit = \"Ohm\") = -1e+40;
input Real CBD(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = -1e+40;
input Real CBS(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = -1e+40;
input Real IS(quantity = \"ElectricCurrent\", unit = \"A\") = 1e-14;
input Real PB(quantity = \"ElectricPotential\", unit = \"V\") = 0.8;
input Real CGSO(quantity = \"Permittivity\", unit = \"F/m\", min = 0.0) = 0.0;
input Real CGDO(quantity = \"Permittivity\", unit = \"F/m\", min = 0.0) = 0.0;
input Real CGBO(quantity = \"Permittivity\", unit = \"F/m\", min = 0.0) = 0.0;
input Real RSH(quantity = \"Resistance\", unit = \"Ohm\") = 0.0;
input Real CJ(quantity = \"CapacitancePerArea\", unit = \"F/m2\") = 0.0;
input Real MJ = 0.5;
input Real CJSW(quantity = \"Permittivity\", unit = \"F/m\", min = 0.0) = 0.0;
input Real MJSW = 0.5;
input Real JS(quantity = \"CurrentDensity\", unit = \"A/m2\") = 0.0;
input Real TOX(quantity = \"Length\", unit = \"m\") = -1e+40;
input Real NSUB = -1e+40;
input Real NSS(quantity = \"PerArea\", unit = \"1/cm2\") = 0.0;
input Real TPG = 1.0;
input Real LD(quantity = \"Length\", unit = \"m\") = 0.0;
input Real UO(quantity = \"AreaPerVoltageSecond\", unit = \"cm2/(V.s)\") = 600.0;
input Real KF = 0.0;
input Real AF = 1.0;
input Real FC = 0.5;
input Real TNOM(quantity = \"ThermodynamicTemperature\", unit = \"degC\") = 27.0;
protected Integer LEVEL = 1;
output ModelcardMOS res;
end Modelica.Electrical.Spice3.Internal.ModelcardMOS;
function Modelica.Electrical.Spice3.Internal.Mos.CurrrentsCapacitances \"Automatically generated record constructor for Modelica.Electrical.Spice3.Internal.Mos.CurrrentsCapacitances\"
input Real idrain(start = 0.0, quantity = \"ElectricCurrent\", unit = \"A\");
input Real iBD(start = 0.0, quantity = \"ElectricCurrent\", unit = \"A\");
input Real iBS(start = 0.0, quantity = \"ElectricCurrent\", unit = \"A\");
input Real cGS(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real cGB(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real cGD(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real cBS(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real cBD(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_capgd(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
output CurrrentsCapacitances res;
end Modelica.Electrical.Spice3.Internal.Mos.CurrrentsCapacitances;
function Modelica.Electrical.Spice3.Internal.Mos.DEVqmeyer \"Automatically generated record constructor for Modelica.Electrical.Spice3.Internal.Mos.DEVqmeyer\"
input Real qm_capgb(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real qm_capgs(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real qm_capgd(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real qm_qgs(start = 0.0, quantity = \"ElectricCharge\", unit = \"C\");
input Real qm_qgb(start = 0.0, quantity = \"ElectricCharge\", unit = \"C\");
input Real qm_qgd(start = 0.0, quantity = \"ElectricCharge\", unit = \"C\");
input Real qm_vgs(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real qm_vgb(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real qm_vgd(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
output DEVqmeyer res;
end Modelica.Electrical.Spice3.Internal.Mos.DEVqmeyer;
function Modelica.Electrical.Spice3.Internal.Mos.MosCalc \"Automatically generated record constructor for Modelica.Electrical.Spice3.Internal.Mos.MosCalc\"
input Real m_vds(quantity = \"ElectricPotential\", unit = \"V\");
input Real m_vgs(quantity = \"ElectricPotential\", unit = \"V\");
input Real m_vbs(quantity = \"ElectricPotential\", unit = \"V\");
input Real m_cbs(quantity = \"ElectricCurrent\", unit = \"A\");
input Real m_gbs(quantity = \"Conductance\", unit = \"S\");
input Real m_cbd(quantity = \"ElectricCurrent\", unit = \"A\");
input Real m_gbd(quantity = \"Conductance\", unit = \"S\");
input Real m_cdrain(quantity = \"ElectricCurrent\", unit = \"A\");
input Real m_gds(quantity = \"Conductance\", unit = \"S\");
input Real m_gm(quantity = \"Transconductance\", unit = \"A/V2\");
input Real m_gmbs(quantity = \"Transconductance\", unit = \"A/V2\");
input Real m_capbsb(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_chargebsb(quantity = \"ElectricCharge\", unit = \"C\");
input Real m_capbss(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_chargebss(quantity = \"ElectricCharge\", unit = \"C\");
input Real m_capbdb(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_chargebdb(quantity = \"ElectricCharge\", unit = \"C\");
input Real m_capbds(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_chargebds(quantity = \"ElectricCharge\", unit = \"C\");
input Real m_Beta;
input Real m_capGSovl(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_capGDovl(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_capGBovl(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_capOx(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_von(quantity = \"ElectricPotential\", unit = \"V\");
input Real m_vdsat(quantity = \"ElectricPotential\", unit = \"V\");
input Integer m_mode(start = 1);
input Real m_lEff(quantity = \"Length\", unit = \"m\");
input Real m_sourceResistance(quantity = \"Resistance\", unit = \"Ohm\");
input Real m_drainResistance(quantity = \"Resistance\", unit = \"Ohm\");
input Real m_tTransconductance(start = 0.0, quantity = \"Transconductance\", unit = \"A/V2\");
input Real m_tSurfMob(start = 0.0, quantity = \"AreaPerVoltageSecond\", unit = \"cm2/(V.s)\");
input Real m_tPhi(start = 0.7, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_tVto(start = 1.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_tSatCurDens(start = 0.0, quantity = \"CurrentDensity\", unit = \"A/m2\");
input Real m_tDrainSatCur(start = 0.0, quantity = \"ElectricCurrent\", unit = \"A\");
input Real m_tSourceSatCur(start = 0.0, quantity = \"ElectricCurrent\", unit = \"A\");
input Real m_tCBDb(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_tCBDs(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_tCBSb(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_tCBSs(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_tCj(start = 0.0, quantity = \"CapacitancePerArea\", unit = \"F/m2\");
input Real m_tCjsw(start = 0.0, quantity = \"Permittivity\", unit = \"F/m\", min = 0.0);
input Real m_tBulkPot(start = 0.7, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_tDepCap(start = 0.35, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_tVbi(start = 1.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_VBScrit(start = 0.7, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_VBDcrit(start = 0.7, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_f1b(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_f2b(start = 0.0);
input Real m_f3b(start = 0.0);
input Real m_f1s(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_f2s(start = 0.0);
input Real m_f3s(start = 0.0);
input Real m_dVt(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_capgd(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_capgs(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_capgb(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_qgs(start = 0.0, quantity = \"ElectricCharge\", unit = \"C\");
input Real m_qgd(start = 0.0, quantity = \"ElectricCharge\", unit = \"C\");
input Real m_qgb(start = 0.0, quantity = \"ElectricCharge\", unit = \"C\");
output MosCalc res;
end Modelica.Electrical.Spice3.Internal.Mos.MosCalc;
function Modelica.Electrical.Spice3.Internal.Mos.MosModelLineParams \"Automatically generated record constructor for Modelica.Electrical.Spice3.Internal.Mos.MosModelLineParams\"
input Real m_jctSatCurDensity(start = 0.0);
input Real m_sheetResistance(start = 0.0, quantity = \"Resistance\", unit = \"Ohm\");
input Real m_bulkJctPotential(start = 0.8);
input Real m_bulkJctBotGradingCoeff(start = 0.5, quantity = \"LinearTemperatureCoefficient\", unit = \"1/K\");
input Real m_bulkJctSideGradingCoeff(start = 0.5, quantity = \"LinearTemperatureCoefficient\", unit = \"1/K\");
input Real m_oxideThickness(start = 1e-07);
input Real m_oxideThicknessIsGiven;
input Real m_gateSourceOverlapCapFactor(start = 0.0);
input Real m_gateDrainOverlapCapFactor(start = 0.0);
input Real m_gateBulkOverlapCapFactor(start = 0.0);
input Real m_fNcoef(start = 0.0);
input Real m_fNexp(start = 1.0);
input Real m_mjswIsGiven;
input Real m_cgsoIsGiven;
input Real m_cgdoIsGiven;
input Real m_cgboIsGiven;
input Real m_pbIsGiven;
input Real m_oxideCapFactor(start = 0.0);
input Real m_vt0(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_vtOIsGiven;
input Real m_capBD(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_capBDIsGiven;
input Real m_capBS(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_capBSIsGiven;
input Real m_bulkCapFactor(start = 0.0, quantity = \"CapacitancePerArea\", unit = \"F/m2\");
input Real m_bulkCapFactorIsGiven;
input Real m_sideWallCapFactor(start = 0.0, quantity = \"Permittivity\", unit = \"F/m\", min = 0.0);
input Real m_fwdCapDepCoeff(start = 0.5);
input Real m_phi(start = 0.6, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_phiIsGiven;
input Real m_gamma(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_gammaIsGiven;
input Real m_lambda(quantity = \"InversePotential\", unit = \"1/V\");
input Real m_substrateDoping(start = 0.0);
input Real m_substrateDopingIsGiven;
input Real m_gateType(start = 1.0);
input Real m_surfaceStateDensity(start = 0.0, quantity = \"PerArea\", unit = \"1/cm2\");
input Real m_surfaceStateDensityIsGiven(start = 0.0);
input Real m_surfaceMobility(start = 600.0, quantity = \"AreaPerVoltageSecond\", unit = \"cm2/(V.s)\");
input Real m_latDiff(start = 0.0, quantity = \"Length\", unit = \"m\");
input Real m_jctSatCur(start = 1e-14, quantity = \"ElectricCurrent\", unit = \"A\");
input Real m_drainResistance(start = 0.0, quantity = \"Resistance\", unit = \"Ohm\");
input Real m_drainResistanceIsGiven;
input Real m_sourceResistance(start = 0.0, quantity = \"Resistance\", unit = \"Ohm\");
input Real m_sourceResistanceIsGiven;
input Real m_transconductance(quantity = \"Transconductance\", unit = \"A/V2\");
input Real m_transconductanceIsGiven;
input Real m_tnom(start = 300.15, quantity = \"ThermodynamicTemperature\", unit = \"K\", min = 0.0, nominal = 300.0, displayUnit = \"degC\");
output MosModelLineParams res;
end Modelica.Electrical.Spice3.Internal.Mos.MosModelLineParams;
function Modelica.Electrical.Spice3.Internal.Mos.MosModelLineVariables \"Automatically generated record constructor for Modelica.Electrical.Spice3.Internal.Mos.MosModelLineVariables\"
input Real m_oxideCapFactor;
input Real m_vt0(quantity = \"ElectricPotential\", unit = \"V\");
input Real m_phi(quantity = \"ElectricPotential\", unit = \"V\");
input Real m_gamma;
input Real m_transconductance(quantity = \"Transconductance\", unit = \"A/V2\");
output MosModelLineVariables res;
end Modelica.Electrical.Spice3.Internal.Mos.MosModelLineVariables;
function Modelica.Electrical.Spice3.Internal.Mos.mosCalcCalcTempDependencies \"Precalculation relating to temperature\"
input Modelica.Electrical.Spice3.Internal.Mos1.Mos1ModelLineParams in_p \"Input record model line parameters for MOS1\";
input Modelica.Electrical.Spice3.Internal.SpiceConstants in_C \"Input record SPICE constants\";
input Modelica.Electrical.Spice3.Internal.Mos.MosModelLineVariables in_vp \"Input record model line variables\";
input Modelica.Electrical.Spice3.Internal.Mosfet.Mosfet in_m \"Input record MOSFET parameters\";
input Modelica.Electrical.Spice3.Internal.Mos1.Mos1Calc in_c \"Input record Mos1Calc\";
input Integer in_m_type \"Type of MOS transistor\";
output Modelica.Electrical.Spice3.Internal.Mos1.Mos1Calc out_c \"Output record with calculated values\";
protected Real ratio;
protected Real ratio4;
protected Real res;
algorithm
out_c := in_c;
ratio := in_m.m_dTemp / in_p.m_tnom;
ratio4 := ratio ^ 1.5;
out_c.m_tTransconductance := in_vp.m_transconductance / ratio4;
out_c.m_Beta := out_c.m_tTransconductance * in_m.m_width / out_c.m_lEff;
out_c.m_tSurfMob := in_p.m_surfaceMobility / ratio4;
out_c.m_tPhi := Modelica.Electrical.Spice3.Internal.Functions.junctionPotDepTemp(in_vp.m_phi, in_m.m_dTemp, in_p.m_tnom);
out_c.m_tVbi := in_vp.m_vt0 + 0.5 * (Modelica.Electrical.Spice3.Internal.Functions.energyGapDepTemp_old(in_p.m_tnom) - Modelica.Electrical.Spice3.Internal.Functions.energyGapDepTemp_old(in_m.m_dTemp)) + /*Real*/(in_m_type) * (0.5 * (out_c.m_tPhi - in_vp.m_phi) - in_vp.m_gamma * sqrt(in_vp.m_phi));
out_c.m_tVto := out_c.m_tVbi + /*Real*/(in_m_type) * in_vp.m_gamma * sqrt(out_c.m_tPhi);
out_c.m_tBulkPot := Modelica.Electrical.Spice3.Internal.Functions.junctionPotDepTemp(in_p.m_bulkJctPotential, in_m.m_dTemp, in_p.m_tnom);
out_c.m_tDepCap := in_p.m_fwdCapDepCoeff * out_c.m_tBulkPot;
if in_p.m_jctSatCurDensity == 0.0 or in_m.m_sourceArea == 0.0 or in_m.m_drainArea == 0.0 then
out_c.m_tDrainSatCur := Modelica.Electrical.Spice3.Internal.Functions.saturationCurDepTempSPICE3MOSFET(in_p.m_jctSatCur, in_m.m_dTemp, in_p.m_tnom);
out_c.m_tSourceSatCur := out_c.m_tDrainSatCur;
out_c.m_VBScrit := Modelica.Electrical.Spice3.Internal.Functions.junctionVCrit(in_m.m_dTemp, 1.0, out_c.m_tSourceSatCur);
out_c.m_VBDcrit := out_c.m_VBScrit;
else
out_c.m_tSatCurDens := Modelica.Electrical.Spice3.Internal.Functions.saturationCurDepTempSPICE3MOSFET(in_p.m_jctSatCurDensity, in_m.m_dTemp, in_p.m_tnom);
out_c.m_tDrainSatCur := out_c.m_tSatCurDens * in_m.m_drainArea;
out_c.m_tSourceSatCur := out_c.m_tSatCurDens * in_m.m_sourceArea;
out_c.m_VBScrit := Modelica.Electrical.Spice3.Internal.Functions.junctionVCrit(in_m.m_dTemp, 1.0, out_c.m_tSourceSatCur);
out_c.m_VBDcrit := Modelica.Electrical.Spice3.Internal.Functions.junctionVCrit(in_m.m_dTemp, 1.0, out_c.m_tDrainSatCur);
end if;
if not in_p.m_capBDIsGiven > 0.5 or not in_p.m_capBSIsGiven > 0.5 then
(res, out_c.m_tCj) := Modelica.Electrical.Spice3.Internal.Functions.junctionParamDepTempSPICE3(in_p.m_bulkJctPotential, in_p.m_bulkCapFactor, in_p.m_bulkJctBotGradingCoeff, in_m.m_dTemp, in_p.m_tnom);
(res, out_c.m_tCjsw) := Modelica.Electrical.Spice3.Internal.Functions.junctionParamDepTempSPICE3(in_p.m_bulkJctPotential, in_p.m_sideWallCapFactor, in_p.m_bulkJctSideGradingCoeff, in_m.m_dTemp, in_p.m_tnom);
(out_c.m_f1s, out_c.m_f2s, out_c.m_f3s) := Modelica.Electrical.Spice3.Internal.Functions.junctionCapCoeffs(in_p.m_bulkJctSideGradingCoeff, in_p.m_fwdCapDepCoeff, out_c.m_tBulkPot);
end if;
if in_p.m_capBDIsGiven > 0.5 then
(res, out_c.m_tCBDb) := Modelica.Electrical.Spice3.Internal.Functions.junctionParamDepTempSPICE3(in_p.m_bulkJctPotential, in_p.m_capBD, in_p.m_bulkJctBotGradingCoeff, in_m.m_dTemp, in_p.m_tnom);
out_c.m_tCBDs := 0.0;
else
out_c.m_tCBDb := out_c.m_tCj * in_m.m_drainArea;
out_c.m_tCBDs := out_c.m_tCjsw * in_m.m_drainPerimeter;
end if;
if in_p.m_capBSIsGiven > 0.5 then
(res, out_c.m_tCBSb) := Modelica.Electrical.Spice3.Internal.Functions.junctionParamDepTempSPICE3(in_p.m_bulkJctPotential, in_p.m_capBS, in_p.m_bulkJctBotGradingCoeff, in_m.m_dTemp, in_p.m_tnom);
out_c.m_tCBSs := 0.0;
else
out_c.m_tCBSb := out_c.m_tCj * in_m.m_sourceArea;
out_c.m_tCBSs := out_c.m_tCjsw * in_m.m_sourcePerimeter;
end if;
(out_c.m_f1b, out_c.m_f2b, out_c.m_f3b) := Modelica.Electrical.Spice3.Internal.Functions.junctionCapCoeffs(in_p.m_bulkJctBotGradingCoeff, in_p.m_fwdCapDepCoeff, out_c.m_tBulkPot);
out_c.m_dVt := 8.61726105451295e-05 * in_m.m_dTemp;
end Modelica.Electrical.Spice3.Internal.Mos.mosCalcCalcTempDependencies;
function Modelica.Electrical.Spice3.Internal.Mos.mosCalcDEVqmeyer \"Calculation of Meyer capacities\"
input Real vgs(quantity = \"ElectricPotential\", unit = \"V\");
input Real vgd(quantity = \"ElectricPotential\", unit = \"V\");
input Real vgb(quantity = \"ElectricPotential\", unit = \"V\");
input Modelica.Electrical.Spice3.Internal.Mos.MosCalc in_c \"Input variable set\";
output Modelica.Electrical.Spice3.Internal.Mos.DEVqmeyer out_qm \"Qmeyer values\";
protected Real vds(quantity = \"ElectricPotential\", unit = \"V\");
protected Real vddif(quantity = \"ElectricPotential\", unit = \"V\");
protected Real vddif1(quantity = \"ElectricPotential\", unit = \"V\");
protected Real vddif2(quantity = \"ElectricalPotential2\", unit = \"V2\");
protected Real vgst(quantity = \"ElectricPotential\", unit = \"V\");
algorithm
vgst := vgs - in_c.m_von;
if vgst <= (-in_c.m_tPhi) then
out_qm.qm_capgb := 0.5 * in_c.m_capOx;
out_qm.qm_capgs := 0.0;
out_qm.qm_capgd := 0.0;
elseif vgst <= (-0.5) * in_c.m_tPhi then
out_qm.qm_capgb := (-0.5) * vgst * in_c.m_capOx / in_c.m_tPhi;
out_qm.qm_capgs := 0.0;
out_qm.qm_capgd := 0.0;
elseif vgst <= 0.0 then
out_qm.qm_capgb := (-0.5) * vgst * in_c.m_capOx / in_c.m_tPhi;
out_qm.qm_capgs := 0.6666666666666666 * vgst * in_c.m_capOx / in_c.m_tPhi + 0.3333333333333333 * in_c.m_capOx;
out_qm.qm_capgd := 0.0;
else
vds := vgs - vgd;
if in_c.m_vdsat <= vds then
out_qm.qm_capgs := 0.3333333333333333 * in_c.m_capOx;
out_qm.qm_capgd := 0.0;
out_qm.qm_capgb := 0.0;
else
vddif := 2.0 * in_c.m_vdsat - vds;
vddif1 := in_c.m_vdsat - vds;
vddif2 := vddif ^ 2.0;
out_qm.qm_capgd := 0.3333333333333333 * in_c.m_capOx * (1.0 - in_c.m_vdsat ^ 2.0 / vddif2);
out_qm.qm_capgs := 0.3333333333333333 * in_c.m_capOx * (1.0 - vddif1 ^ 2.0 / vddif2);
out_qm.qm_capgb := 0.0;
end if;
end if;
out_qm.qm_qgs := 0.0;
out_qm.qm_qgb := 0.0;
out_qm.qm_qgd := 0.0;
out_qm.qm_vgs := 0.0;
out_qm.qm_vgb := 0.0;
out_qm.qm_vgd := 0.0;
end Modelica.Electrical.Spice3.Internal.Mos.mosCalcDEVqmeyer;
function Modelica.Electrical.Spice3.Internal.Mos.mosCalcInitEquations \"Mosfet initial precalculations (level 1)\"
input Modelica.Electrical.Spice3.Internal.Mos1.Mos1ModelLineParams in_p \"Input record model line parameters for MOS1\";
input Modelica.Electrical.Spice3.Internal.SpiceConstants in_C \"Input record SPICE constants\";
input Modelica.Electrical.Spice3.Internal.Mos.MosModelLineVariables in_vp \"Input record model line variables\";
input Modelica.Electrical.Spice3.Internal.Mosfet.Mosfet in_m \"Input record MOSFET parameters\";
output Modelica.Electrical.Spice3.Internal.Mos1.Mos1Calc out_c \"Output record Mos1 calculated values\";
algorithm
out_c.m_drainResistance := if in_p.m_drainResistanceIsGiven > 0.5 then in_p.m_drainResistance else in_p.m_sheetResistance * in_m.m_drainSquares;
out_c.m_sourceResistance := if in_p.m_sourceResistanceIsGiven > 0.5 then in_p.m_sourceResistance else in_p.m_sheetResistance * in_m.m_sourceSquares;
out_c.m_lEff := in_m.m_len + (-2.0) * in_p.m_latDiff;
if abs(out_c.m_lEff) < 1e-18 then
out_c.m_lEff := 1e-06;
end if;
out_c.m_capGSovl := in_p.m_gateSourceOverlapCapFactor * in_m.m_width;
out_c.m_capGDovl := in_p.m_gateDrainOverlapCapFactor * in_m.m_width;
out_c.m_capGBovl := in_p.m_gateBulkOverlapCapFactor * out_c.m_lEff;
out_c.m_capOx := in_vp.m_oxideCapFactor * out_c.m_lEff * in_m.m_width;
out_c.m_tTransconductance := 0.0;
out_c.m_tSurfMob := 0.0;
out_c.m_tPhi := 0.7;
out_c.m_tVto := 1.0;
out_c.m_tSatCurDens := 0.0;
out_c.m_tDrainSatCur := 0.0;
out_c.m_tSourceSatCur := 0.0;
out_c.m_tCBDb := 0.0;
out_c.m_tCBDs := 0.0;
out_c.m_tCBSb := 0.0;
out_c.m_tCBSs := 0.0;
out_c.m_tCj := 0.0;
out_c.m_tCjsw := 0.0;
out_c.m_tBulkPot := 0.7;
out_c.m_tDepCap := 0.35;
out_c.m_tVbi := 1.0;
out_c.m_VBScrit := 0.7;
out_c.m_VBDcrit := 0.7;
out_c.m_f1b := 0.0;
out_c.m_f2b := 0.0;
out_c.m_f3b := 0.0;
out_c.m_f1s := 0.0;
out_c.m_f2s := 0.0;
out_c.m_f3s := 0.0;
out_c.m_dVt := 0.0;
out_c.m_capgd := 0.0;
out_c.m_capgs := 0.0;
out_c.m_capgb := 0.0;
out_c.m_qgs := 0.0;
out_c.m_qgd := 0.0;
out_c.m_qgb := 0.0;
out_c.m_vds := 0.0;
out_c.m_vgs := 0.0;
out_c.m_vbs := 0.0;
out_c.m_cbs := 0.0;
out_c.m_gbs := 0.0;
out_c.m_cbd := 0.0;
out_c.m_gbd := 0.0;
out_c.m_cdrain := 0.0;
out_c.m_gds := 0.0;
out_c.m_gm := 0.0;
out_c.m_gmbs := 0.0;
out_c.m_capbsb := 0.0;
out_c.m_chargebsb := 0.0;
out_c.m_capbss := 0.0;
out_c.m_chargebss := 0.0;
out_c.m_capbdb := 0.0;
out_c.m_chargebdb := 0.0;
out_c.m_capbds := 0.0;
out_c.m_chargebds := 0.0;
out_c.m_Beta := 0.0;
out_c.m_von := 0.0;
out_c.m_vdsat := 0.0;
out_c.m_mode := 1;
end Modelica.Electrical.Spice3.Internal.Mos.mosCalcInitEquations;
function Modelica.Electrical.Spice3.Internal.Mos.mosCalcNoBypassCode \"Calculation of currents and capacities (level 1)\"
input Modelica.Electrical.Spice3.Internal.Mosfet.Mosfet in_m \"Input record MOSFET parameters\";
input Integer in_m_type \"Type of MOS transistor\";
input Modelica.Electrical.Spice3.Internal.Mos1.Mos1Calc in_c \"Input record Mos1Calc\";
input Modelica.Electrical.Spice3.Internal.Mos1.Mos1ModelLineParams in_p \"Input record model line parameters for MOS1\";
input Modelica.Electrical.Spice3.Internal.SpiceConstants in_C \"Input record SPICE constants\";
input Modelica.Electrical.Spice3.Internal.Mos.MosModelLineVariables in_vp \"Input record model line variables\";
input Boolean in_m_bInit;
input Real[4] in_m_pVoltageValues(quantity = \"ElectricPotential\", unit = \"V\");
output Modelica.Electrical.Spice3.Internal.Mos.CurrrentsCapacitances out_cc;
protected Real vbd(quantity = \"ElectricPotential\", unit = \"V\");
protected Real vgd(quantity = \"ElectricPotential\", unit = \"V\");
protected Real vgb(quantity = \"ElectricPotential\", unit = \"V\");
protected Real cur(quantity = \"ElectricCurrent\", unit = \"A\");
protected Integer n;
protected Modelica.Electrical.Spice3.Internal.Mos.DEVqmeyer qm;
protected Modelica.Electrical.Spice3.Internal.Mos1.Mos1Calc int_c;
protected Real hlp;
algorithm
int_c := in_c;
out_cc.m_capgd := 0.0;
int_c.m_vgs := /*Real*/(in_m_type) * (in_m_pVoltageValues[1] - in_m_pVoltageValues[4]);
int_c.m_vbs := /*Real*/(in_m_type) * (in_m_pVoltageValues[2] - in_m_pVoltageValues[4]);
int_c.m_vds := /*Real*/(in_m_type) * (in_m_pVoltageValues[3] - in_m_pVoltageValues[4]);
vbd := int_c.m_vbs - int_c.m_vds;
vgd := int_c.m_vgs - int_c.m_vds;
if int_c.m_vds >= 0.0 then
vbd := int_c.m_vbs - int_c.m_vds;
else
int_c.m_vbs := vbd + int_c.m_vds;
end if;
vgb := int_c.m_vgs - int_c.m_vbs;
(int_c.m_cbd, int_c.m_gbd) := Modelica.Electrical.Spice3.Internal.Functions.junction2SPICE3MOSFET(int_c.m_cbd, int_c.m_gbd, vbd, in_m.m_dTemp, 1.0, int_c.m_tDrainSatCur);
out_cc.iBD := /*Real*/(in_m_type) * int_c.m_cbd;
(int_c.m_cbs, int_c.m_gbs) := Modelica.Electrical.Spice3.Internal.Functions.junction2SPICE3MOSFET(int_c.m_cbs, int_c.m_gbs, int_c.m_vbs, in_m.m_dTemp, 1.0, int_c.m_tSourceSatCur);
out_cc.iBS := /*Real*/(in_m_type) * int_c.m_cbs;
int_c.m_mode := if int_c.m_vds >= 0.0 then 1 else -1;
if int_c.m_mode == 1 then
int_c := Modelica.Electrical.Spice3.Internal.Mos1.drainCur(int_c.m_vbs, int_c.m_vgs, int_c.m_vds, int_c, in_p, in_C, in_vp, in_m_type);
else
int_c := Modelica.Electrical.Spice3.Internal.Mos1.drainCur(vbd, vgd, -int_c.m_vds, int_c, in_p, in_C, in_vp, in_m_type);
end if;
n := if int_c.m_mode == 1 then 6 else 5;
out_cc.idrain := /*Real*/(in_m_type) * int_c.m_cdrain * /*Real*/(int_c.m_mode);
int_c.m_capbss := 0.0;
int_c.m_chargebss := 0.0;
int_c.m_capbds := 0.0;
int_c.m_chargebds := 0.0;
(int_c.m_capbsb, int_c.m_chargebsb) := Modelica.Electrical.Spice3.Internal.Functions.junctionCap(int_c.m_tCBSb, int_c.m_vbs, int_c.m_tDepCap, in_p.m_bulkJctBotGradingCoeff, int_c.m_tBulkPot, int_c.m_f1b, int_c.m_f2b, int_c.m_f3b);
(int_c.m_capbdb, int_c.m_chargebdb) := Modelica.Electrical.Spice3.Internal.Functions.junctionCap(int_c.m_tCBDb, vbd, int_c.m_tDepCap, in_p.m_bulkJctBotGradingCoeff, int_c.m_tBulkPot, int_c.m_f1b, int_c.m_f2b, int_c.m_f3b);
if not in_p.m_capBSIsGiven > 0.5 then
(int_c.m_capbss, int_c.m_chargebss) := Modelica.Electrical.Spice3.Internal.Functions.junctionCap(int_c.m_tCBSs, int_c.m_vbs, int_c.m_tDepCap, in_p.m_bulkJctSideGradingCoeff, int_c.m_tBulkPot, int_c.m_f1s, int_c.m_f2s, int_c.m_f3s);
end if;
if not in_p.m_capBDIsGiven > 0.5 then
(int_c.m_capbds, int_c.m_chargebds) := Modelica.Electrical.Spice3.Internal.Functions.junctionCap(int_c.m_tCBDs, vbd, int_c.m_tDepCap, in_p.m_bulkJctSideGradingCoeff, int_c.m_tBulkPot, int_c.m_f1s, int_c.m_f2s, int_c.m_f3s);
end if;
out_cc.cBS := if in_m_bInit then 1e-15 else int_c.m_capbsb + int_c.m_capbss;
out_cc.cBD := if in_m_bInit then 1e-15 else int_c.m_capbdb + int_c.m_capbds;
if int_c.m_mode > 0 then
qm := Modelica.Electrical.Spice3.Internal.Mos.mosCalcDEVqmeyer(int_c.m_vgs, vgd, vgb, /*.Modelica.Electrical.Spice3.Internal.Mos.MosCalc*/(int_c));
else
qm := Modelica.Electrical.Spice3.Internal.Mos.mosCalcDEVqmeyer(vgd, int_c.m_vgs, vgb, /*.Modelica.Electrical.Spice3.Internal.Mos.MosCalc*/(int_c));
hlp := qm.qm_capgd;
qm.qm_capgd := qm.qm_capgs;
qm.qm_capgs := hlp;
end if;
int_c.m_capgd := 2.0 * qm.qm_capgd + int_c.m_capGDovl;
int_c.m_capgs := 2.0 * qm.qm_capgs + int_c.m_capGSovl;
int_c.m_capgb := 2.0 * qm.qm_capgb + int_c.m_capGBovl;
out_cc.cGB := if in_m_bInit then -1e+40 else int_c.m_capgb;
out_cc.cGD := if in_m_bInit then -1e+40 else int_c.m_capgd;
out_cc.cGS := if in_m_bInit then -1e+40 else int_c.m_capgs;
end Modelica.Electrical.Spice3.Internal.Mos.mosCalcNoBypassCode;
function Modelica.Electrical.Spice3.Internal.Mos1.Mos1Calc \"Automatically generated record constructor for Modelica.Electrical.Spice3.Internal.Mos1.Mos1Calc\"
input Real m_vds(quantity = \"ElectricPotential\", unit = \"V\");
input Real m_vgs(quantity = \"ElectricPotential\", unit = \"V\");
input Real m_vbs(quantity = \"ElectricPotential\", unit = \"V\");
input Real m_cbs(quantity = \"ElectricCurrent\", unit = \"A\");
input Real m_gbs(quantity = \"Conductance\", unit = \"S\");
input Real m_cbd(quantity = \"ElectricCurrent\", unit = \"A\");
input Real m_gbd(quantity = \"Conductance\", unit = \"S\");
input Real m_cdrain(quantity = \"ElectricCurrent\", unit = \"A\");
input Real m_gds(quantity = \"Conductance\", unit = \"S\");
input Real m_gm(quantity = \"Transconductance\", unit = \"A/V2\");
input Real m_gmbs(quantity = \"Transconductance\", unit = \"A/V2\");
input Real m_capbsb(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_chargebsb(quantity = \"ElectricCharge\", unit = \"C\");
input Real m_capbss(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_chargebss(quantity = \"ElectricCharge\", unit = \"C\");
input Real m_capbdb(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_chargebdb(quantity = \"ElectricCharge\", unit = \"C\");
input Real m_capbds(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_chargebds(quantity = \"ElectricCharge\", unit = \"C\");
input Real m_Beta;
input Real m_capGSovl(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_capGDovl(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_capGBovl(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_capOx(quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_von(quantity = \"ElectricPotential\", unit = \"V\");
input Real m_vdsat(quantity = \"ElectricPotential\", unit = \"V\");
input Integer m_mode(start = 1);
input Real m_lEff(quantity = \"Length\", unit = \"m\");
input Real m_sourceResistance(quantity = \"Resistance\", unit = \"Ohm\");
input Real m_drainResistance(quantity = \"Resistance\", unit = \"Ohm\");
input Real m_tTransconductance(start = 0.0, quantity = \"Transconductance\", unit = \"A/V2\");
input Real m_tSurfMob(start = 0.0, quantity = \"AreaPerVoltageSecond\", unit = \"cm2/(V.s)\");
input Real m_tPhi(start = 0.7, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_tVto(start = 1.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_tSatCurDens(start = 0.0, quantity = \"CurrentDensity\", unit = \"A/m2\");
input Real m_tDrainSatCur(start = 0.0, quantity = \"ElectricCurrent\", unit = \"A\");
input Real m_tSourceSatCur(start = 0.0, quantity = \"ElectricCurrent\", unit = \"A\");
input Real m_tCBDb(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_tCBDs(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_tCBSb(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_tCBSs(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_tCj(start = 0.0, quantity = \"CapacitancePerArea\", unit = \"F/m2\");
input Real m_tCjsw(start = 0.0, quantity = \"Permittivity\", unit = \"F/m\", min = 0.0);
input Real m_tBulkPot(start = 0.7, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_tDepCap(start = 0.35, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_tVbi(start = 1.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_VBScrit(start = 0.7, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_VBDcrit(start = 0.7, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_f1b(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_f2b(start = 0.0);
input Real m_f3b(start = 0.0);
input Real m_f1s(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_f2s(start = 0.0);
input Real m_f3s(start = 0.0);
input Real m_dVt(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_capgd(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_capgs(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_capgb(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_qgs(start = 0.0, quantity = \"ElectricCharge\", unit = \"C\");
input Real m_qgd(start = 0.0, quantity = \"ElectricCharge\", unit = \"C\");
input Real m_qgb(start = 0.0, quantity = \"ElectricCharge\", unit = \"C\");
output Mos1Calc res;
end Modelica.Electrical.Spice3.Internal.Mos1.Mos1Calc;
function Modelica.Electrical.Spice3.Internal.Mos1.Mos1ModelLineParams \"Automatically generated record constructor for Modelica.Electrical.Spice3.Internal.Mos1.Mos1ModelLineParams\"
input Real m_jctSatCurDensity(start = 0.0);
input Real m_sheetResistance(start = 0.0, quantity = \"Resistance\", unit = \"Ohm\");
input Real m_bulkJctPotential(start = 0.8);
input Real m_bulkJctBotGradingCoeff(start = 0.5, quantity = \"LinearTemperatureCoefficient\", unit = \"1/K\");
input Real m_bulkJctSideGradingCoeff(start = 0.5, quantity = \"LinearTemperatureCoefficient\", unit = \"1/K\");
input Real m_oxideThickness(start = 1e-07);
input Real m_oxideThicknessIsGiven;
input Real m_gateSourceOverlapCapFactor(start = 0.0);
input Real m_gateDrainOverlapCapFactor(start = 0.0);
input Real m_gateBulkOverlapCapFactor(start = 0.0);
input Real m_fNcoef(start = 0.0);
input Real m_fNexp(start = 1.0);
input Real m_mjswIsGiven;
input Real m_cgsoIsGiven;
input Real m_cgdoIsGiven;
input Real m_cgboIsGiven;
input Real m_pbIsGiven;
input Real m_oxideCapFactor(start = 0.0);
input Real m_vt0(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_vtOIsGiven;
input Real m_capBD(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_capBDIsGiven;
input Real m_capBS(start = 0.0, quantity = \"Capacitance\", unit = \"F\", min = 0.0);
input Real m_capBSIsGiven;
input Real m_bulkCapFactor(start = 0.0, quantity = \"CapacitancePerArea\", unit = \"F/m2\");
input Real m_bulkCapFactorIsGiven;
input Real m_sideWallCapFactor(start = 0.0, quantity = \"Permittivity\", unit = \"F/m\", min = 0.0);
input Real m_fwdCapDepCoeff(start = 0.5);
input Real m_phi(start = 0.6, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_phiIsGiven;
input Real m_gamma(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_gammaIsGiven;
input Real m_lambda(start = 0.0, quantity = \"InversePotential\", unit = \"1/V\");
input Real m_substrateDoping(start = 0.0);
input Real m_substrateDopingIsGiven;
input Real m_gateType(start = 1.0);
input Real m_surfaceStateDensity(start = 0.0, quantity = \"PerArea\", unit = \"1/cm2\");
input Real m_surfaceStateDensityIsGiven(start = 0.0);
input Real m_surfaceMobility(start = 600.0, quantity = \"AreaPerVoltageSecond\", unit = \"cm2/(V.s)\");
input Real m_latDiff(start = 0.0, quantity = \"Length\", unit = \"m\");
input Real m_jctSatCur(start = 1e-14, quantity = \"ElectricCurrent\", unit = \"A\");
input Real m_drainResistance(start = 0.0, quantity = \"Resistance\", unit = \"Ohm\");
input Real m_drainResistanceIsGiven;
input Real m_sourceResistance(start = 0.0, quantity = \"Resistance\", unit = \"Ohm\");
input Real m_sourceResistanceIsGiven;
input Real m_transconductance(start = 2e-05, quantity = \"Transconductance\", unit = \"A/V2\");
input Real m_transconductanceIsGiven;
input Real m_tnom(start = 300.15, quantity = \"ThermodynamicTemperature\", unit = \"K\", min = 0.0, nominal = 300.0, displayUnit = \"degC\");
output Mos1ModelLineParams res;
end Modelica.Electrical.Spice3.Internal.Mos1.Mos1ModelLineParams;
function Modelica.Electrical.Spice3.Internal.Mos1.drainCur \"Drain current calculation\"
input Real vb(quantity = \"ElectricPotential\", unit = \"V\");
input Real vg(quantity = \"ElectricPotential\", unit = \"V\");
input Real vds(quantity = \"ElectricPotential\", unit = \"V\");
input Modelica.Electrical.Spice3.Internal.Mos1.Mos1Calc in_c \"Input record Mos1Calc\";
input Modelica.Electrical.Spice3.Internal.Mos1.Mos1ModelLineParams in_p \"Input record model line parameters for MOS1\";
input Modelica.Electrical.Spice3.Internal.SpiceConstants in_C \"Spice constants\";
input Modelica.Electrical.Spice3.Internal.Mos.MosModelLineVariables in_vp \"Input record model line variables\";
input Integer in_m_type \"Type of Mos transistor\";
output Modelica.Electrical.Spice3.Internal.Mos1.Mos1Calc out_c \"Output record Mos1Calc\";
protected Real arg;
protected Real betap;
protected Real sarg;
protected Real vgst(quantity = \"ElectricPotential\", unit = \"V\");
algorithm
out_c := in_c;
if vb <= 0.0 then
sarg := sqrt(out_c.m_tPhi - vb);
else
sarg := sqrt(out_c.m_tPhi);
sarg := sarg + (-0.5) * vb / sarg;
sarg := max(0.0, sarg);
end if;
out_c.m_von := out_c.m_tVbi * /*Real*/(in_m_type) + in_vp.m_gamma * sarg;
vgst := vg - out_c.m_von;
out_c.m_vdsat := max(vgst, 0.0);
arg := if sarg <= 0.0 then 0.0 else 0.5 * in_vp.m_gamma / sarg;
if vgst <= 0.0 then
out_c.m_cdrain := 0.0;
out_c.m_gm := 0.0;
out_c.m_gds := 0.0;
out_c.m_gmbs := 0.0;
else
betap := out_c.m_Beta * (1.0 + in_p.m_lambda * vds);
if vgst <= vds then
out_c.m_cdrain := 0.5 * betap * vgst ^ 2.0;
out_c.m_gm := betap * vgst;
out_c.m_gds := 0.5 * in_p.m_lambda * out_c.m_Beta * vgst ^ 2.0;
out_c.m_gmbs := out_c.m_gm * arg;
else
out_c.m_cdrain := betap * vds * (vgst + (-0.5) * vds);
out_c.m_gm := betap * vds;
out_c.m_gds := betap * (vgst - vds) + in_p.m_lambda * out_c.m_Beta * vds * (vgst + (-0.5) * vds);
out_c.m_gmbs := out_c.m_gm * arg;
end if;
end if;
end Modelica.Electrical.Spice3.Internal.Mos1.drainCur;
function Modelica.Electrical.Spice3.Internal.Mos1.mos1ModelLineParamsInitEquations \"Initial precalculation\"
input Modelica.Electrical.Spice3.Internal.Mos1.Mos1ModelLineParams in_p \"Input record model line parameters for MOS1\";
input Modelica.Electrical.Spice3.Internal.SpiceConstants in_C \"Spice constants\";
input Integer in_m_type \"Type of MOS transistor\";
output Modelica.Electrical.Spice3.Internal.Mos.MosModelLineVariables out_v \"Output record model line variables\";
protected Real vtnom(quantity = \"ElectricPotential\", unit = \"V\");
protected Real fermis(quantity = \"ElectricPotential\", unit = \"V\");
protected Real fermig;
protected Real wkfng;
protected Real wkfngs;
protected Real egfet1;
protected Real vfb;
algorithm
out_v.m_oxideCapFactor := in_p.m_oxideCapFactor;
out_v.m_transconductance := in_p.m_transconductance;
out_v.m_phi := in_p.m_phi;
out_v.m_gamma := in_p.m_gamma;
out_v.m_vt0 := in_p.m_vt0;
vtnom := 8.61726105451295e-05 * in_p.m_tnom;
egfet1 := 1.16 + (-0.000702) * in_p.m_tnom ^ 2.0 / (1108.0 + in_p.m_tnom);
if not in_p.m_oxideThicknessIsGiven > 0.5 or in_p.m_oxideThickness == 0.0 then
if in_p.m_oxideThickness == 0.0 then
out_v.m_oxideCapFactor := 0.0;
end if;
else
out_v.m_oxideCapFactor := 3.45314379969e-11 / in_p.m_oxideThickness;
if out_v.m_oxideCapFactor <> 0.0 then
if not in_p.m_transconductanceIsGiven > 0.5 then
out_v.m_transconductance := 0.0001 * in_p.m_surfaceMobility * out_v.m_oxideCapFactor;
end if;
if in_p.m_substrateDopingIsGiven > 0.5 then
if 1000000.0 * in_p.m_substrateDoping > 1.45e+16 then
if not in_p.m_phiIsGiven > 0.5 then
out_v.m_phi := 2.0 * vtnom * log(6.896551724137932e-11 * in_p.m_substrateDoping);
out_v.m_phi := max(0.1, out_v.m_phi);
end if;
fermis := 0.5 * /*Real*/(in_m_type) * out_v.m_phi;
wkfng := 3.2;
if in_p.m_gateType <> 0.0 then
fermig := 0.5 * /*Real*/(in_m_type) * in_p.m_gateType * egfet1;
wkfng := 3.25 + 0.5 * egfet1 - fermig;
end if;
wkfngs := -3.25 + wkfng + (-0.5) * egfet1 - fermis;
if not in_p.m_gammaIsGiven > 0.5 then
out_v.m_gamma := 5.761561600860045e-12 * sqrt(in_p.m_substrateDoping / out_v.m_oxideCapFactor);
end if;
if not in_p.m_vtOIsGiven > 0.5 then
vfb := wkfngs + (-1.6021918e-15) * in_p.m_surfaceStateDensity / out_v.m_oxideCapFactor;
out_v.m_vt0 := vfb + /*Real*/(in_m_type) * (out_v.m_gamma * sqrt(out_v.m_phi) + out_v.m_phi);
end if;
end if;
end if;
end if;
end if;
end Modelica.Electrical.Spice3.Internal.Mos1.mos1ModelLineParamsInitEquations;
function Modelica.Electrical.Spice3.Internal.Mos1.mos1RenameParameters \"Parameter renaming to internal names\"
input Modelica.Electrical.Spice3.Internal.ModelcardMOS ex \"Modelcard with technologieparameters\";
input Modelica.Electrical.Spice3.Internal.SpiceConstants con \"Spice constants\";
output Modelica.Electrical.Spice3.Internal.Mos.MosModelLineParams intern \"Output record model line parameters\";
algorithm
intern.m_cgboIsGiven := 0.0;
intern.m_cgdoIsGiven := 0.0;
intern.m_cgsoIsGiven := 0.0;
intern.m_mjswIsGiven := 0.0;
intern.m_pbIsGiven := 0.0;
intern.m_surfaceStateDensityIsGiven := 0.0;
intern.m_oxideCapFactor := 0.0;
intern.m_vtOIsGiven := if ex.VTO > -1e+40 then 1.0 else 0.0;
intern.m_vt0 := if ex.VTO > -1e+40 then ex.VTO else 0.0;
intern.m_capBDIsGiven := if ex.CBD > -1e+40 then 1.0 else 0.0;
intern.m_capBD := if ex.CBD > -1e+40 then ex.CBD else 0.0;
intern.m_capBSIsGiven := if ex.CBS > -1e+40 then 1.0 else 0.0;
intern.m_capBS := if ex.CBS > -1e+40 then ex.CBS else 0.0;
intern.m_bulkCapFactorIsGiven := if ex.CJ > -1e+40 then 1.0 else 0.0;
intern.m_bulkCapFactor := if ex.CJ > -1e+40 then ex.CJ else 0.0;
intern.m_sideWallCapFactor := ex.CJSW;
intern.m_fwdCapDepCoeff := ex.FC;
intern.m_phiIsGiven := if ex.PHI > -1e+40 then 1.0 else 0.0;
intern.m_phi := if ex.PHI > -1e+40 then ex.PHI else 0.6;
intern.m_gammaIsGiven := if ex.GAMMA > -1e+40 then 1.0 else 0.0;
intern.m_gamma := if ex.GAMMA > -1e+40 then ex.GAMMA else 0.0;
intern.m_lambda := ex.LAMBDA;
intern.m_substrateDopingIsGiven := if ex.NSUB > -1e+40 then 1.0 else 0.0;
intern.m_substrateDoping := if ex.NSUB > -1e+40 then ex.NSUB else 0.0;
intern.m_gateType := ex.TPG;
intern.m_surfaceStateDensity := ex.NSS;
intern.m_surfaceMobility := ex.UO;
intern.m_latDiff := ex.LD;
intern.m_jctSatCur := ex.IS;
intern.m_drainResistanceIsGiven := if ex.RD > -1e+40 then 1.0 else 0.0;
intern.m_drainResistance := if ex.RD > -1e+40 then ex.RD else 0.0;
intern.m_sourceResistanceIsGiven := if ex.RS > -1e+40 then 1.0 else 0.0;
intern.m_sourceResistance := if ex.RS > -1e+40 then ex.RS else 0.0;
intern.m_transconductanceIsGiven := if ex.KP > -1e+40 then 1.0 else 0.0;
intern.m_transconductance := if ex.KP > -1e+40 then ex.KP else 2e-05;
intern.m_tnom := if ex.TNOM > -1e+40 then 273.15 + ex.TNOM else 300.15;
intern.m_jctSatCurDensity := ex.JS;
intern.m_sheetResistance := ex.RSH;
intern.m_bulkJctPotential := ex.PB;
intern.m_bulkJctBotGradingCoeff := ex.MJ;
intern.m_bulkJctSideGradingCoeff := ex.MJSW;
intern.m_oxideThicknessIsGiven := if ex.TOX > -1e+40 then 1.0 else 0.0;
intern.m_oxideThickness := if ex.TOX > -1e+40 then ex.TOX else 0.0;
intern.m_gateSourceOverlapCapFactor := ex.CGSO;
intern.m_gateDrainOverlapCapFactor := ex.CGDO;
intern.m_gateBulkOverlapCapFactor := ex.CGBO;
intern.m_fNcoef := ex.KF;
intern.m_fNexp := ex.AF;
end Modelica.Electrical.Spice3.Internal.Mos1.mos1RenameParameters;
function Modelica.Electrical.Spice3.Internal.Mos1.mos1RenameParametersDev \"Device parameter renaming to internal names\"
input Modelica.Electrical.Spice3.Internal.ModelcardMOS ex;
input Integer mtype;
input Real W(quantity = \"Length\", unit = \"m\") \"Channel Width\";
input Real L(quantity = \"Length\", unit = \"m\") \"Channel Length\";
input Real AD(quantity = \"Area\", unit = \"m2\") \"Area of the drain diffusion\";
input Real AS(quantity = \"Area\", unit = \"m2\") \"Area of the source diffusion\";
input Real PD(quantity = \"Length\", unit = \"m\") \"Perimeter of the drain junction\";
input Real PS(quantity = \"Length\", unit = \"m\") \"Perimeter of the source junction\";
input Real NRD \"Number of squares of the drain diffusions\";
input Real NRS \"Number of squares of the source diffusions\";
input Integer OFF \"Optional initial condition: 0 - IC not used, 1 - IC used, not implemented yet\";
input Real IC \"Initial condition values, not implemented yet\";
input Real TEMP(quantity = \"ThermodynamicTemperature\", unit = \"degC\") \"Temperature\";
output Modelica.Electrical.Spice3.Internal.Mosfet.Mosfet dev \"Output record Mosfet\";
algorithm
dev.m_len := L;
dev.m_width := W;
dev.m_drainArea := AD;
dev.m_sourceArea := AS;
dev.m_drainSquares := NRD;
dev.m_sourceSquares := NRS;
dev.m_drainPerimeter := PD;
dev.m_sourcePerimeter := PS;
dev.m_dICVDSIsGiven := if IC > -1e+40 then 1.0 else 0.0;
dev.m_dICVDS := if IC > -1e+40 then IC else 0.0;
dev.m_dICVGSIsGiven := if IC > -1e+40 then 1.0 else 0.0;
dev.m_dICVGS := if IC > -1e+40 then IC else 0.0;
dev.m_dICVBSIsGiven := if IC > -1e+40 then 1.0 else 0.0;
dev.m_dICVBS := if IC > -1e+40 then IC else 0.0;
dev.m_off := OFF;
dev.m_bPMOS := mtype;
dev.m_nLevel := 1;
dev.m_dTemp := 273.15 + TEMP;
dev.m_drainPerimiter := 0.0;
dev.m_sourcePerimiter := 0.0;
dev.m_uic := false;
end Modelica.Electrical.Spice3.Internal.Mos1.mos1RenameParametersDev;
function Modelica.Electrical.Spice3.Internal.Mosfet.Mosfet \"Automatically generated record constructor for Modelica.Electrical.Spice3.Internal.Mosfet.Mosfet\"
input Real m_dTemp(start = 300.15, quantity = \"ThermodynamicTemperature\", unit = \"K\", min = 0.0, nominal = 300.0, displayUnit = \"degC\");
input Real m_len(start = 0.0001, quantity = \"Length\", unit = \"m\");
input Real m_width(start = 0.0001, quantity = \"Length\", unit = \"m\");
input Real m_drainArea(start = 0.0, quantity = \"Area\", unit = \"m2\");
input Real m_sourceArea(start = 0.0, quantity = \"Area\", unit = \"m2\");
input Real m_drainSquares(start = 1.0);
input Real m_sourceSquares(start = 1.0);
input Real m_drainPerimeter(start = 0.0, quantity = \"Length\", unit = \"m\");
input Real m_sourcePerimeter(start = 0.0, quantity = \"Length\", unit = \"m\");
input Real m_dICVDS(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_dICVDSIsGiven;
input Real m_dICVGS(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_dICVGSIsGiven;
input Real m_dICVBS(start = 0.0, quantity = \"ElectricPotential\", unit = \"V\");
input Real m_dICVBSIsGiven;
input Integer m_off(start = 0);
input Integer m_bPMOS(start = 0);
input Integer m_nLevel(start = 1);
input Real m_drainPerimiter(start = 0.0, quantity = \"Length\", unit = \"m\");
input Real m_sourcePerimiter(start = 0.0, quantity = \"Length\", unit = \"m\");
input Boolean m_uic;
output Mosfet res;
end Modelica.Electrical.Spice3.Internal.Mosfet.Mosfet;
function Modelica.Electrical.Spice3.Internal.SpiceConstants \"Automatically generated record constructor for Modelica.Electrical.Spice3.Internal.SpiceConstants\"
protected Real EPSSIL = 1.035943139907e-10;
protected Real EPSOX = 3.453133e-11;
protected Real CHARGE(quantity = \"ElectricCharge\", unit = \"C\") = 1.6021918e-19;
protected Real CONSTCtoK(quantity = \"ThermodynamicTemperature\", unit = \"K\", min = 0.0, start = 288.15, nominal = 300.0, displayUnit = \"degC\") = 273.15;
protected Real CONSTboltz(quantity = \"HeatCapacity\", unit = \"J/K\") = 1.3806226e-23;
protected Real REFTEMP(quantity = \"ThermodynamicTemperature\", unit = \"K\", min = 0.0, start = 288.15, nominal = 300.0, displayUnit = \"degC\") = 300.15;
protected Real CONSTroot2 = 1.414213562373095;
protected Real CONSTvt0(unit = \"(J/K)/(A.s)\") = 0.02586470905512062;
protected Real CONSTKoverQ(unit = \"(J/K)/(A.s)\") = 8.61726105451295e-05;
protected Real CONSTe = 2.718281828459045;
protected Real CKTgmin(quantity = \"Conductance\", unit = \"S\") = 1e-12;
protected Real CKTnomTemp(quantity = \"ThermodynamicTemperature\", unit = \"K\", min = 0.0, start = 288.15, nominal = 300.0, displayUnit = \"degC\") = 300.15;
protected Real CKTtemp(quantity = \"ThermodynamicTemperature\", unit = \"K\", min = 0.0, start = 288.15, nominal = 300.0, displayUnit = \"degC\") = 300.15;
protected Real CKTdefaultMosAD(quantity = \"Area\", unit = \"m2\") = 0.0;
protected Real CKTdefaultMosAS(quantity = \"Area\", unit = \"m2\") = 0.0;
protected Real CKTdefaultMosL(quantity = \"Length\", unit = \"m\") = 0.0001;
protected Real CKTdefaultMosW(quantity = \"Length\", unit = \"m\") = 0.0001;
protected Real CKTreltol = 1e-10;
protected Real CKTabstol = 1e-15;
protected Real CKTvolttol = 1e-10;
protected Real CKTtemptol = 0.001;
output SpiceConstants res;
end Modelica.Electrical.Spice3.Internal.SpiceConstants;
function Modelica.Electrical.Spice3.Internal.SpiceRoot.initJunctionVoltages \"Choice of junction voltage handling, obsolete, use initJunctionVoltageRevised\"
output Boolean ret;
algorithm
ret := false;
end Modelica.Electrical.Spice3.Internal.SpiceRoot.initJunctionVoltages;
function Modelica.Electrical.Spice3.Internal.SpiceRoot.useInitialConditions \"Initial condition handling\"
output Boolean ret;
algorithm
ret := false;
end Modelica.Electrical.Spice3.Internal.SpiceRoot.useInitialConditions;
function Modelica.SIunits.Conversions.from_degC \"Inline before index reduction\" \"Convert from degCelsius to Kelvin\"
input Real Celsius(quantity = \"ThermodynamicTemperature\", unit = \"degC\") \"Celsius value\";
output Real Kelvin(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) \"Kelvin value\";
algorithm
Kelvin := 273.15 + Celsius;
end Modelica.SIunits.Conversions.from_degC;
class A
constant Real L(quantity = \"Length\", unit = \"m\") = 0.0001 \"Length\";
constant Real W(quantity = \"Length\", unit = \"m\") = 0.0001 \"Width\";
constant Real AD(quantity = \"Area\", unit = \"m2\") = 0.0 \"Area of the drain diffusion\";
constant Real AS(quantity = \"Area\", unit = \"m2\") = 0.0 \"Area of the source diffusion\";
constant Real PD(quantity = \"Length\", unit = \"m\") = 0.0 \"Perimeter of the drain junction\";
constant Real PS(quantity = \"Length\", unit = \"m\") = 0.0 \"Perimeter of the source junction\";
constant Real NRD = 1.0 \"Number of squares of the drain diffusions\";
constant Real NRS = 1.0 \"Number of squares of the source diffusions\";
constant Integer OFF = 0 \"Optional initial condition: 0 - IC not used, 1 - IC used, not implemented yet\";
constant Real IC(quantity = \"ElectricPotential\", unit = \"V\") = -1e+40 \"Initial condition values, not implemented yet\";
constant Real TEMP(quantity = \"ThermodynamicTemperature\", unit = \"degC\") = 27.0 \"Operating temperature of the device\";
constant Real modelcard.VTO(quantity = \"ElectricPotential\", unit = \"V\") = -1e+40 \"Zero-bias threshold voltage, default 0\";
constant Real modelcard.KP(quantity = \"Transconductance\", unit = \"A/V2\") = -1e+40 \"Transconductance parameter, default 2e-5\";
constant Real modelcard.GAMMA = -1e+40 \"Bulk threshold parameter, default 0\";
constant Real modelcard.PHI(quantity = \"ElectricPotential\", unit = \"V\") = -1e+40 \"Surface potential, default 0.6\";
constant Real modelcard.LAMBDA(quantity = \"InversePotential\", unit = \"1/V\") = 0.0 \"Channel-length modulation, default 0\";
constant Real modelcard.RD(quantity = \"Resistance\", unit = \"Ohm\") = -1e+40 \"Drain ohmic resistance, default 0\";
constant Real modelcard.RS(quantity = \"Resistance\", unit = \"Ohm\") = -1e+40 \"Source ohmic resistance, default 0\";
constant Real modelcard.CBD(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = -1e+40 \"Zero-bias B-D junction capacitance, default 0\";
constant Real modelcard.CBS(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = -1e+40 \"Zero-bias B-S junction capacitance, default 0\";
constant Real modelcard.IS(quantity = \"ElectricCurrent\", unit = \"A\") = 1e-14 \"Bulk junction saturation current\";
constant Real modelcard.PB(quantity = \"ElectricPotential\", unit = \"V\") = 0.8 \"Bulk junction potential\";
constant Real modelcard.CGSO(quantity = \"Permittivity\", unit = \"F/m\", min = 0.0) = 0.0 \"Gate-source overlap capacitance per meter channel width\";
constant Real modelcard.CGDO(quantity = \"Permittivity\", unit = \"F/m\", min = 0.0) = 0.0 \"Gate-drain overlap capacitance per meter channel width\";
constant Real modelcard.CGBO(quantity = \"Permittivity\", unit = \"F/m\", min = 0.0) = 0.0 \"Gate-bulk overlap capacitance per meter channel width\";
constant Real modelcard.RSH(quantity = \"Resistance\", unit = \"Ohm\") = 0.0 \"Drain and source diffusion sheet resistance\";
constant Real modelcard.CJ(quantity = \"CapacitancePerArea\", unit = \"F/m2\") = 0.0 \"Zero-bias bulk junction bottom cap. per sq-meter of junction area\";
constant Real modelcard.MJ = 0.5 \"Bulk junction bottom grading coefficient\";
constant Real modelcard.CJSW(quantity = \"Permittivity\", unit = \"F/m\", min = 0.0) = 0.0 \"Zero-bias junction sidewall cap. per meter of junction perimeter\";
constant Real modelcard.MJSW = 0.5 \"Bulk junction sidewall grading coefficient\";
constant Real modelcard.JS(quantity = \"CurrentDensity\", unit = \"A/m2\") = 0.0 \"Bulk junction saturation current per sq-meter of junction area\";
constant Real modelcard.TOX(quantity = \"Length\", unit = \"m\") = -1e+40 \"Oxide thickness, default 1e-7\";
constant Real modelcard.NSUB = -1e+40 \"Substrate doping, default 0\";
constant Real modelcard.NSS(quantity = \"PerArea\", unit = \"1/cm2\") = 0.0 \"Surface state density\";
constant Real modelcard.TPG = 1.0 \"Type of gate material: +1 opp. to substrate, -1 same as substrate, 0 Al gate\";
constant Real modelcard.LD(quantity = \"Length\", unit = \"m\") = 0.0 \"Lateral diffusion\";
constant Real modelcard.UO(quantity = \"AreaPerVoltageSecond\", unit = \"cm2/(V.s)\") = 600.0 \"Surface mobility\";
constant Real modelcard.KF = 0.0 \"Flicker noise coefficient\";
constant Real modelcard.AF = 1.0 \"Flicker noise exponent\";
constant Real modelcard.FC = 0.5 \"Coefficient for forward-bias depletion capacitance formula\";
constant Real modelcard.TNOM(quantity = \"ThermodynamicTemperature\", unit = \"degC\") = 27.0 \"Parameter measurement temperature, default 27\";
constant Integer modelcard.LEVEL = 1 \"Model level: Shichman-Hodges\";
constant Real C.EPSSIL = 1.035943139907e-10;
constant Real C.EPSOX = 3.453133e-11;
constant Real C.CHARGE(quantity = \"ElectricCharge\", unit = \"C\") = 1.6021918e-19;
constant Real C.CONSTCtoK(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) = 273.15;
constant Real C.CONSTboltz(quantity = \"HeatCapacity\", unit = \"J/K\") = 1.3806226e-23;
constant Real C.REFTEMP(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) = 300.15;
constant Real C.CONSTroot2 = 1.414213562373095;
constant Real C.CONSTvt0(unit = \"(J/K)/(A.s)\") = 0.02586470905512062;
constant Real C.CONSTKoverQ(unit = \"(J/K)/(A.s)\") = 8.61726105451295e-05;
constant Real C.CONSTe = 2.718281828459045;
constant Real C.CKTgmin(quantity = \"Conductance\", unit = \"S\") = 1e-12;
constant Real C.CKTnomTemp(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) = 300.15;
constant Real C.CKTtemp(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 288.15, nominal = 300.0) = 300.15;
constant Real C.CKTdefaultMosAD(quantity = \"Area\", unit = \"m2\") = 0.0;
constant Real C.CKTdefaultMosAS(quantity = \"Area\", unit = \"m2\") = 0.0;
constant Real C.CKTdefaultMosL(quantity = \"Length\", unit = \"m\") = 0.0001;
constant Real C.CKTdefaultMosW(quantity = \"Length\", unit = \"m\") = 0.0001;
constant Real C.CKTreltol = 1e-10;
constant Real C.CKTabstol = 1e-15;
constant Real C.CKTvolttol = 1e-10;
constant Real C.CKTtemptol = 0.001;
constant Integer m_type = 1;
constant Boolean m_bInit = false;
constant Real p.m_jctSatCurDensity(start = 0.0) = 0.0 \"JS, Bulk jct. sat. current density, input - use tSatCurDens\";
constant Real p.m_sheetResistance(quantity = \"Resistance\", unit = \"Ohm\", start = 0.0) = 0.0 \"RSH, Sheet resistance\";
constant Real p.m_bulkJctPotential(start = 0.8) = 0.8 \"PB, Bulk junction potential, input - use tBulkPot\";
constant Real p.m_bulkJctBotGradingCoeff(quantity = \"LinearTemperatureCoefficient\", unit = \"1/K\", start = 0.5) = 0.5 \"MJ, Bottom grading coefficient\";
constant Real p.m_bulkJctSideGradingCoeff(quantity = \"LinearTemperatureCoefficient\", unit = \"1/K\", start = 0.5) = 0.5 \"MJSW, Side grading coefficient\";
constant Real p.m_oxideThickness(start = 1e-07) = 0.0 \"TOX, Oxide thickness unit: micron\";
constant Real p.m_oxideThicknessIsGiven = 0.0 \"TOX, IsGiven value\";
constant Real p.m_gateSourceOverlapCapFactor(start = 0.0) = 0.0 \"CGS0, Gate-source overlap cap\";
constant Real p.m_gateDrainOverlapCapFactor(start = 0.0) = 0.0 \"CGD0, Gate-drain overlap cap\";
constant Real p.m_gateBulkOverlapCapFactor(start = 0.0) = 0.0 \"CGB0, Gate-bulk overlap cap\";
constant Real p.m_fNcoef(start = 0.0) = 0.0 \"KF, Flicker noise coefficient\";
constant Real p.m_fNexp(start = 1.0) = 1.0 \"AF, Flicker noise exponent\";
constant Real p.m_mjswIsGiven = 0.0 \"MJSW, IsGivenValue\";
constant Real p.m_cgsoIsGiven = 0.0 \"CGSO, IsGivenValue\";
constant Real p.m_cgdoIsGiven = 0.0 \"CGDO, IsGivenValue\";
constant Real p.m_cgboIsGiven = 0.0 \"CGBO, IsGivenValue\";
constant Real p.m_pbIsGiven = 0.0 \"PB, IsGivenValue\";
constant Real p.m_oxideCapFactor(start = 0.0) = 0.0;
constant Real p.m_vt0(quantity = \"ElectricPotential\", unit = \"V\", start = 0.0) = 0.0 \"VTO, Threshold voltage\";
constant Real p.m_vtOIsGiven = 0.0 \"VTO IsGivenValue\";
constant Real p.m_capBD(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0 \"CBD, B-D junction capacitance\";
constant Real p.m_capBDIsGiven = 0.0 \"CapBD IsGivenValue\";
constant Real p.m_capBS(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0 \"CBS, B-S junction capacitance\";
constant Real p.m_capBSIsGiven = 0.0 \"CapBS IsGivenValue\";
constant Real p.m_bulkCapFactor(quantity = \"CapacitancePerArea\", unit = \"F/m2\", start = 0.0) = 0.0 \"CJ, Bottom junction cap per area\";
constant Real p.m_bulkCapFactorIsGiven = 1.0 \"Bulk cap factor IsGivenValue\";
constant Real p.m_sideWallCapFactor(quantity = \"Permittivity\", unit = \"F/m\", min = 0.0, start = 0.0) = 0.0 \"CJSW, Side grading coefficient\";
constant Real p.m_fwdCapDepCoeff(start = 0.5) = 0.5 \"FC, Forward bias junction fit parameter\";
constant Real p.m_phi(quantity = \"ElectricPotential\", unit = \"V\", start = 0.6) = 0.6 \"PHI, Surface potential\";
constant Real p.m_phiIsGiven = 0.0 \"Phi IsGivenValue\";
constant Real p.m_gamma(quantity = \"ElectricPotential\", unit = \"V\", start = 0.0) = 0.0 \"GAMMA, Bulk threshold parameter\";
constant Real p.m_gammaIsGiven = 0.0 \"Gamma IsGivenValue\";
constant Real p.m_lambda(quantity = \"InversePotential\", unit = \"1/V\", start = 0.0) = 0.0 \"Channel-length modulation\";
constant Real p.m_substrateDoping(start = 0.0) = 0.0 \"NSUB, Substrate doping\";
constant Real p.m_substrateDopingIsGiven = 0.0 \"Substrate doping IsGivenValue\";
constant Real p.m_gateType(start = 1.0) = 1.0 \"TPG, Gate type\";
constant Real p.m_surfaceStateDensity(quantity = \"PerArea\", unit = \"1/cm2\", start = 0.0) = 0.0 \"NSS, Gate type\";
constant Real p.m_surfaceStateDensityIsGiven(start = 0.0) = 0.0 \"surfaceStateDensityIsGivenValue\";
constant Real p.m_surfaceMobility(quantity = \"AreaPerVoltageSecond\", unit = \"cm2/(V.s)\", start = 600.0) = 600.0 \"UO, Surface mobility\";
constant Real p.m_latDiff(quantity = \"Length\", unit = \"m\", start = 0.0) = 0.0 \"LD, Lateral diffusion\";
constant Real p.m_jctSatCur(quantity = \"ElectricCurrent\", unit = \"A\", start = 1e-14) = 1e-14 \"IS, Bulk junction sat. current\";
constant Real p.m_drainResistance(quantity = \"Resistance\", unit = \"Ohm\", start = 0.0) = 0.0 \"RD, Drain ohmic resistance\";
constant Real p.m_drainResistanceIsGiven = 0.0 \"Drain resistance IsGivenValue\";
constant Real p.m_sourceResistance(quantity = \"Resistance\", unit = \"Ohm\", start = 0.0) = 0.0 \"RS, Source ohmic resistance\";
constant Real p.m_sourceResistanceIsGiven = 0.0 \"Source resistance IsGivenValue\";
constant Real p.m_transconductance(quantity = \"Transconductance\", unit = \"A/V2\", start = 2e-05) = 2e-05 \"input - use tTransconductance\";
constant Real p.m_transconductanceIsGiven = 0.0 \"Transconductance IsGivenValue\";
constant Real p.m_tnom(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 300.15, nominal = 300.0) = 300.15 \"TNOM, Parameter measurement temperature\";
constant Real m.m_dTemp(quantity = \"ThermodynamicTemperature\", unit = \"K\", displayUnit = \"degC\", min = 0.0, start = 300.15, nominal = 300.0) = 300.15 \"TEMP, Device Temperature\";
constant Real m.m_len(quantity = \"Length\", unit = \"m\", start = 0.0001) = 0.0001 \"L, length of channel region\";
constant Real m.m_width(quantity = \"Length\", unit = \"m\", start = 0.0001) = 0.0001 \"W, width of channel region\";
constant Real m.m_drainArea(quantity = \"Area\", unit = \"m2\", start = 0.0) = 0.0 \"AD, area of drain diffusion\";
constant Real m.m_sourceArea(quantity = \"Area\", unit = \"m2\", start = 0.0) = 0.0 \"AS, area of source diffusion\";
constant Real m.m_drainSquares(start = 1.0) = 1.0 \"NRD, length of drain in squares\";
constant Real m.m_sourceSquares(start = 1.0) = 1.0 \"NRS, length of source in squares\";
constant Real m.m_drainPerimeter(quantity = \"Length\", unit = \"m\", start = 0.0) = 0.0 \"PD, Drain perimeter\";
constant Real m.m_sourcePerimeter(quantity = \"Length\", unit = \"m\", start = 0.0) = 0.0 \"PS, Source perimeter\";
constant Real m.m_dICVDS(quantity = \"ElectricPotential\", unit = \"V\", start = 0.0) = 0.0 \"IC_VDS, Initial D-S voltage\";
constant Real m.m_dICVDSIsGiven = 0.0 \"IC_VDS, IsGivenValue\";
constant Real m.m_dICVGS(quantity = \"ElectricPotential\", unit = \"V\", start = 0.0) = 0.0 \"IC_VGS, Initial G-S voltage\";
constant Real m.m_dICVGSIsGiven = 0.0 \"IC_VGS, IsGivenValue\";
constant Real m.m_dICVBS(quantity = \"ElectricPotential\", unit = \"V\", start = 0.0) = 0.0 \"IC_VBS, Initial B-S voltage\";
constant Real m.m_dICVBSIsGiven = 0.0 \"IC_VBS, IsGivenValue\";
constant Integer m.m_off(start = 0) = 0 \"Device initially off, non-zero to indicate device is off for dc analysis\";
constant Integer m.m_bPMOS(start = 0) = 1 \"P type MOSFET model\";
constant Integer m.m_nLevel(start = 1) = 1 \"MOS model level\";
constant Real m.m_drainPerimiter(quantity = \"Length\", unit = \"m\", start = 0.0) = 0.0 \"PD, Drain perimeter\";
constant Real m.m_sourcePerimiter(quantity = \"Length\", unit = \"m\", start = 0.0) = 0.0 \"PS, Source perimeter\";
constant Boolean m.m_uic = false;
constant Real vp.m_oxideCapFactor = 0.0;
constant Real vp.m_vt0(quantity = \"ElectricPotential\", unit = \"V\") = 0.0;
constant Real vp.m_phi(quantity = \"ElectricPotential\", unit = \"V\") = 0.6;
constant Real vp.m_gamma = 0.0;
constant Real vp.m_transconductance(quantity = \"Transconductance\", unit = \"A/V2\") = 2e-05;
constant Real c1.m_vds(quantity = \"ElectricPotential\", unit = \"V\") = 0.0 \"Vds, Drain-Source voltage\";
constant Real c1.m_vgs(quantity = \"ElectricPotential\", unit = \"V\") = 0.0 \"Vgs, Gate-Source voltage\";
constant Real c1.m_vbs(quantity = \"ElectricPotential\", unit = \"V\") = 0.0 \"Vbs, Bulk-Source voltage\";
constant Real c1.m_cbs(quantity = \"ElectricCurrent\", unit = \"A\") = 0.0 \"Ibs, B-S junction current\";
constant Real c1.m_gbs(quantity = \"Conductance\", unit = \"S\") = 0.0 \"Gbs, Bulk-Source conductance\";
constant Real c1.m_cbd(quantity = \"ElectricCurrent\", unit = \"A\") = 0.0 \"Ibd, B-D junction current\";
constant Real c1.m_gbd(quantity = \"Conductance\", unit = \"S\") = 0.0 \"Gbd, Bulk-Drain conductance\";
constant Real c1.m_cdrain(quantity = \"ElectricCurrent\", unit = \"A\") = 0.0 \"Ids\";
constant Real c1.m_gds(quantity = \"Conductance\", unit = \"S\") = 0.0 \"Gds, Drain-Source conductance\";
constant Real c1.m_gm(quantity = \"Transconductance\", unit = \"A/V2\") = 0.0 \"Gm, Transconductance\";
constant Real c1.m_gmbs(quantity = \"Transconductance\", unit = \"A/V2\") = 0.0 \"Gmbs, Bulk-Source transconductance\";
constant Real c1.m_capbsb(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cbsb\";
constant Real c1.m_chargebsb(quantity = \"ElectricCharge\", unit = \"C\") = 0.0 \"Qbsb\";
constant Real c1.m_capbss(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cbss\";
constant Real c1.m_chargebss(quantity = \"ElectricCharge\", unit = \"C\") = 0.0 \"Qbss\";
constant Real c1.m_capbdb(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cbdb\";
constant Real c1.m_chargebdb(quantity = \"ElectricCharge\", unit = \"C\") = 0.0 \"Qbdb\";
constant Real c1.m_capbds(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cbds\";
constant Real c1.m_chargebds(quantity = \"ElectricCharge\", unit = \"C\") = 0.0 \"Qbds\";
constant Real c1.m_Beta = 0.0 \"Beta\";
constant Real c1.m_capGSovl(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cgso, Gate-source overlap cap.\";
constant Real c1.m_capGDovl(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cgdo, Gate-drain overlap cap.\";
constant Real c1.m_capGBovl(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cgbo, Gate-bulk overlap cap.\";
constant Real c1.m_capOx(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cox\";
constant Real c1.m_von(quantity = \"ElectricPotential\", unit = \"V\") = 0.0 \"Von, Turn-on voltage\";
constant Real c1.m_vdsat(quantity = \"ElectricPotential\", unit = \"V\") = 0.0 \"Vdsat\";
constant Integer c1.m_mode(start = 1) = 1 \"Mode\";
constant Real c1.m_lEff(quantity = \"Length\", unit = \"m\") = 0.0001;
constant Real c1.m_sourceResistance(quantity = \"Resistance\", unit = \"Ohm\") = 0.0 \"Rs\";
constant Real c1.m_drainResistance(quantity = \"Resistance\", unit = \"Ohm\") = 0.0 \"Rd\";
constant Real c1.m_tTransconductance(quantity = \"Transconductance\", unit = \"A/V2\", start = 0.0) = 0.0;
constant Real c1.m_tSurfMob(quantity = \"AreaPerVoltageSecond\", unit = \"cm2/(V.s)\", start = 0.0) = 0.0;
constant Real c1.m_tPhi(quantity = \"ElectricPotential\", unit = \"V\", start = 0.7) = 0.7;
constant Real c1.m_tVto(quantity = \"ElectricPotential\", unit = \"V\", start = 1.0) = 1.0;
constant Real c1.m_tSatCurDens(quantity = \"CurrentDensity\", unit = \"A/m2\", start = 0.0) = 0.0;
constant Real c1.m_tDrainSatCur(quantity = \"ElectricCurrent\", unit = \"A\", start = 0.0) = 0.0;
constant Real c1.m_tSourceSatCur(quantity = \"ElectricCurrent\", unit = \"A\", start = 0.0) = 0.0;
constant Real c1.m_tCBDb(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real c1.m_tCBDs(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real c1.m_tCBSb(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real c1.m_tCBSs(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real c1.m_tCj(quantity = \"CapacitancePerArea\", unit = \"F/m2\", start = 0.0) = 0.0;
constant Real c1.m_tCjsw(quantity = \"Permittivity\", unit = \"F/m\", min = 0.0, start = 0.0) = 0.0;
constant Real c1.m_tBulkPot(quantity = \"ElectricPotential\", unit = \"V\", start = 0.7) = 0.7;
constant Real c1.m_tDepCap(quantity = \"ElectricPotential\", unit = \"V\", start = 0.35) = 0.35;
constant Real c1.m_tVbi(quantity = \"ElectricPotential\", unit = \"V\", start = 1.0) = 1.0;
constant Real c1.m_VBScrit(quantity = \"ElectricPotential\", unit = \"V\", start = 0.7) = 0.7;
constant Real c1.m_VBDcrit(quantity = \"ElectricPotential\", unit = \"V\", start = 0.7) = 0.7;
constant Real c1.m_f1b(quantity = \"ElectricPotential\", unit = \"V\", start = 0.0) = 0.0;
constant Real c1.m_f2b(start = 0.0) = 0.0;
constant Real c1.m_f3b(start = 0.0) = 0.0;
constant Real c1.m_f1s(quantity = \"ElectricPotential\", unit = \"V\", start = 0.0) = 0.0;
constant Real c1.m_f2s(start = 0.0) = 0.0;
constant Real c1.m_f3s(start = 0.0) = 0.0;
constant Real c1.m_dVt(quantity = \"ElectricPotential\", unit = \"V\", start = 0.0) = 0.0;
constant Real c1.m_capgd(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real c1.m_capgs(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real c1.m_capgb(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real c1.m_qgs(quantity = \"ElectricCharge\", unit = \"C\", start = 0.0) = 0.0;
constant Real c1.m_qgd(quantity = \"ElectricCharge\", unit = \"C\", start = 0.0) = 0.0;
constant Real c1.m_qgb(quantity = \"ElectricCharge\", unit = \"C\", start = 0.0) = 0.0;
constant Real c2.m_vds(quantity = \"ElectricPotential\", unit = \"V\") = 0.0 \"Vds, Drain-Source voltage\";
constant Real c2.m_vgs(quantity = \"ElectricPotential\", unit = \"V\") = 0.0 \"Vgs, Gate-Source voltage\";
constant Real c2.m_vbs(quantity = \"ElectricPotential\", unit = \"V\") = 0.0 \"Vbs, Bulk-Source voltage\";
constant Real c2.m_cbs(quantity = \"ElectricCurrent\", unit = \"A\") = 0.0 \"Ibs, B-S junction current\";
constant Real c2.m_gbs(quantity = \"Conductance\", unit = \"S\") = 0.0 \"Gbs, Bulk-Source conductance\";
constant Real c2.m_cbd(quantity = \"ElectricCurrent\", unit = \"A\") = 0.0 \"Ibd, B-D junction current\";
constant Real c2.m_gbd(quantity = \"Conductance\", unit = \"S\") = 0.0 \"Gbd, Bulk-Drain conductance\";
constant Real c2.m_cdrain(quantity = \"ElectricCurrent\", unit = \"A\") = 0.0 \"Ids\";
constant Real c2.m_gds(quantity = \"Conductance\", unit = \"S\") = 0.0 \"Gds, Drain-Source conductance\";
constant Real c2.m_gm(quantity = \"Transconductance\", unit = \"A/V2\") = 0.0 \"Gm, Transconductance\";
constant Real c2.m_gmbs(quantity = \"Transconductance\", unit = \"A/V2\") = 0.0 \"Gmbs, Bulk-Source transconductance\";
constant Real c2.m_capbsb(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cbsb\";
constant Real c2.m_chargebsb(quantity = \"ElectricCharge\", unit = \"C\") = 0.0 \"Qbsb\";
constant Real c2.m_capbss(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cbss\";
constant Real c2.m_chargebss(quantity = \"ElectricCharge\", unit = \"C\") = 0.0 \"Qbss\";
constant Real c2.m_capbdb(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cbdb\";
constant Real c2.m_chargebdb(quantity = \"ElectricCharge\", unit = \"C\") = 0.0 \"Qbdb\";
constant Real c2.m_capbds(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cbds\";
constant Real c2.m_chargebds(quantity = \"ElectricCharge\", unit = \"C\") = 0.0 \"Qbds\";
constant Real c2.m_Beta = 2e-05 \"Beta\";
constant Real c2.m_capGSovl(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cgso, Gate-source overlap cap.\";
constant Real c2.m_capGDovl(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cgdo, Gate-drain overlap cap.\";
constant Real c2.m_capGBovl(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cgbo, Gate-bulk overlap cap.\";
constant Real c2.m_capOx(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0 \"Cox\";
constant Real c2.m_von(quantity = \"ElectricPotential\", unit = \"V\") = 0.0 \"Von, Turn-on voltage\";
constant Real c2.m_vdsat(quantity = \"ElectricPotential\", unit = \"V\") = 0.0 \"Vdsat\";
constant Integer c2.m_mode(start = 1) = 1 \"Mode\";
constant Real c2.m_lEff(quantity = \"Length\", unit = \"m\") = 0.0001;
constant Real c2.m_sourceResistance(quantity = \"Resistance\", unit = \"Ohm\") = 0.0 \"Rs\";
constant Real c2.m_drainResistance(quantity = \"Resistance\", unit = \"Ohm\") = 0.0 \"Rd\";
constant Real c2.m_tTransconductance(quantity = \"Transconductance\", unit = \"A/V2\", start = 0.0) = 2e-05;
constant Real c2.m_tSurfMob(quantity = \"AreaPerVoltageSecond\", unit = \"cm2/(V.s)\", start = 0.0) = 600.0;
constant Real c2.m_tPhi(quantity = \"ElectricPotential\", unit = \"V\", start = 0.7) = 0.6;
constant Real c2.m_tVto(quantity = \"ElectricPotential\", unit = \"V\", start = 1.0) = 0.0;
constant Real c2.m_tSatCurDens(quantity = \"CurrentDensity\", unit = \"A/m2\", start = 0.0) = 0.0;
constant Real c2.m_tDrainSatCur(quantity = \"ElectricCurrent\", unit = \"A\", start = 0.0) = 1e-14;
constant Real c2.m_tSourceSatCur(quantity = \"ElectricCurrent\", unit = \"A\", start = 0.0) = 1e-14;
constant Real c2.m_tCBDb(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real c2.m_tCBDs(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real c2.m_tCBSb(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real c2.m_tCBSs(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real c2.m_tCj(quantity = \"CapacitancePerArea\", unit = \"F/m2\", start = 0.0) = 0.0;
constant Real c2.m_tCjsw(quantity = \"Permittivity\", unit = \"F/m\", min = 0.0, start = 0.0) = 0.0;
constant Real c2.m_tBulkPot(quantity = \"ElectricPotential\", unit = \"V\", start = 0.7) = 0.8;
constant Real c2.m_tDepCap(quantity = \"ElectricPotential\", unit = \"V\", start = 0.35) = 0.4;
constant Real c2.m_tVbi(quantity = \"ElectricPotential\", unit = \"V\", start = 1.0) = 0.0;
constant Real c2.m_VBScrit(quantity = \"ElectricPotential\", unit = \"V\", start = 0.7) = 0.7302833841653967;
constant Real c2.m_VBDcrit(quantity = \"ElectricPotential\", unit = \"V\", start = 0.7) = 0.7302833841653967;
constant Real c2.m_f1b(quantity = \"ElectricPotential\", unit = \"V\", start = 0.0) = 0.4686291501015239;
constant Real c2.m_f2b(start = 0.0) = 0.3535533905932738;
constant Real c2.m_f3b(start = 0.0) = 0.25;
constant Real c2.m_f1s(quantity = \"ElectricPotential\", unit = \"V\", start = 0.0) = 0.4686291501015239;
constant Real c2.m_f2s(start = 0.0) = 0.3535533905932738;
constant Real c2.m_f3s(start = 0.0) = 0.25;
constant Real c2.m_dVt(quantity = \"ElectricPotential\", unit = \"V\", start = 0.0) = 0.02586470905512062;
constant Real c2.m_capgd(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real c2.m_capgs(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real c2.m_capgb(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real c2.m_qgs(quantity = \"ElectricCharge\", unit = \"C\", start = 0.0) = 0.0;
constant Real c2.m_qgd(quantity = \"ElectricCharge\", unit = \"C\", start = 0.0) = 0.0;
constant Real c2.m_qgb(quantity = \"ElectricCharge\", unit = \"C\", start = 0.0) = 0.0;
constant Real cc.idrain(quantity = \"ElectricCurrent\", unit = \"A\", start = 0.0) = 0.0;
constant Real cc.iBD(quantity = \"ElectricCurrent\", unit = \"A\", start = 0.0) = 0.0;
constant Real cc.iBS(quantity = \"ElectricCurrent\", unit = \"A\", start = 0.0) = 0.0;
constant Real cc.cGS(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real cc.cGB(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real cc.cGD(quantity =Unexpected end of /proc/mounts line `overlay / overlay rw,relatime,lowerdir=/var/lib/docker/overlay2/l/CM3C2UP6O2ZBUJT7NNGQ3RA4O2:/var/lib/docker/overlay2/l/OFBQHWN5VWB3ZDIVLSEHB4ZZO7:/var/lib/docker/overlay2/l/XKNAMZMLHIGLUIWZN6NHS4LQOB:/var/lib/docker/overlay2/l/XDXTSPLZ4IFADJTBU5VPCFEWAO:/var/lib/docker/overlay2/l/TLE42ND4WLQ5HMCG4FABWZYYBM:/var/lib/docker/overlay2/l/N2ZO5AQSQ6RGU55LFPZO3NSFIG:/var/lib/docker/overlay2/l/AFXOGW55ZNK4NUDS4WEZ6VE76H:/var/lib/docker/overlay2/l/KJ36F2MJVNS5N45ELI4N3CNXLN:/var/lib/docker/overlay2/l/SFDLWMOUVQFPH'
Unexpected end of /proc/mounts line `overlay / overlay rw,relatime,lowerdir=/var/lib/docker/overlay2/l/CM3C2UP6O2ZBUJT7NNGQ3RA4O2:/var/lib/docker/overlay2/l/OFBQHWN5VWB3ZDIVLSEHB4ZZO7:/var/lib/docker/overlay2/l/XKNAMZMLHIGLUIWZN6NHS4LQOB:/var/lib/docker/overlay2/l/XDXTSPLZ4IFADJTBU5VPCFEWAO:/var/lib/docker/overlay2/l/TLE42ND4WLQ5HMCG4FABWZYYBM:/var/lib/docker/overlay2/l/N2ZO5AQSQ6RGU55LFPZO3NSFIG:/var/lib/docker/overlay2/l/AFXOGW55ZNK4NUDS4WEZ6VE76H:/var/lib/docker/overlay2/l/KJ36F2MJVNS5N45ELI4N3CNXLN:/var/lib/docker/overlay2/l/SFDLWMOUVQFPH'
Unexpected end of /proc/mounts line `overlay / overlay rw,relatime,lowerdir=/var/lib/docker/overlay2/l/CM3C2UP6O2ZBUJT7NNGQ3RA4O2:/var/lib/docker/overlay2/l/OFBQHWN5VWB3ZDIVLSEHB4ZZO7:/var/lib/docker/overlay2/l/XKNAMZMLHIGLUIWZN6NHS4LQOB:/var/lib/docker/overlay2/l/XDXTSPLZ4IFADJTBU5VPCFEWAO:/var/lib/docker/overlay2/l/TLE42ND4WLQ5HMCG4FABWZYYBM:/var/lib/docker/overlay2/l/N2ZO5AQSQ6RGU55LFPZO3NSFIG:/var/lib/docker/overlay2/l/AFXOGW55ZNK4NUDS4WEZ6VE76H:/var/lib/docker/overlay2/l/KJ36F2MJVNS5N45ELI4N3CNXLN:/var/lib/docker/overlay2/l/SFDLWMOUVQFPH'
\"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real cc.cBS(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real cc.cBD(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real cc.m_capgd(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0;
end A;
"
""
record SimulationResult
resultFile = "A_res.mat",
simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'A', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = ''",
messages = "LOG_SUCCESS | info | The initialization finished successfully without homotopy method.
LOG_SUCCESS | info | The simulation finished successfully.
"
end SimulationResult;
""
Equation mismatch: diff says:
--- /tmp/omc-rtest-unknown/simulation/modelica/records/ATotal.mos_temp6252/equations-expected2019-01-25 00:39:30.878828767 +0000
+++ /tmp/omc-rtest-unknown/simulation/modelica/records/ATotal.mos_temp6252/equations-got2019-01-25 00:39:34.390788403 +0000
@@ -1276,11 +1276,12 @@
constant Real cc.idrain(quantity = \"ElectricCurrent\", unit = \"A\", start = 0.0) = 0.0;
constant Real cc.iBD(quantity = \"ElectricCurrent\", unit = \"A\", start = 0.0) = 0.0;
constant Real cc.iBS(quantity = \"ElectricCurrent\", unit = \"A\", start = 0.0) = 0.0;
constant Real cc.cGS(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real cc.cGB(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
-constant Real cc.cGD(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
+constant Real cc.cGD(quantity =Unexpected end of /proc/mounts line `overlay / overlay rw,relatime,lowerdir=/var/lib/docker/overlay2/l/CM3C2UP6O2ZBUJT7NNGQ3RA4O2:/var/lib/docker/overlay2/l/OFBQHWN5VWB3ZDIVLSEHB4ZZO7:/var/lib/docker/overlay2/l/XKNAMZMLHIGLUIWZN6NHS4LQOB:/var/lib/docker/overlay2/l/XDXTSPLZ4IFADJTBU5VPCFEWAO:/var/lib/docker/overlay2/l/TLE42ND4WLQ5HMCG4FABWZYYBM:/var/lib/docker/overlay2/l/N2ZO5AQSQ6RGU55LFPZO3NSFIG:/var/lib/docker/overlay2/l/AFXOGW55ZNK4NUDS4WEZ6VE76H:/var/lib/docker/overlay2/l/KJ36F2MJVNS5N45ELI4N3CNXLN:/var/lib/docker/overlay2/l/SFDLWMOUVQFPH'
+\"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real cc.cBS(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real cc.cBD(quantity = \"Capacitance\", unit = \"F\", min = 0.0, start = 0.0) = 0.0;
constant Real cc.m_capgd(quantity = \"Capacitance\", unit = \"F\", min = 0.0) = 0.0;
end A;
"
Equation mismatch: omc-diff says:
Failed ' ' 'U'
Line 1281: Text differs:
expected: constant Real cc.cGD(quantity = \"Capacitance\", unit = \"F\", min =
got: constant Real cc.cGD(quantity =Unexpected end of /proc/mounts line `overlay / overlay rw,relatime,lowerdir=/var/lib/docker/overlay
== 1 out of 1 tests failed [simulation/modelica/records/ATotal.mos_temp6252, time: 4]