Skip to content
[Jenkins]Jenkins
log in

Failed

tests / testsuite-clang / openmodelica_interactive-API.interactive_api_calls.mos (from (result.xml))

Failing for the past 2 builds (Since #16 )
Took 1 sec.

Stacktrace

Output mismatch (see stdout for details)

Standard Output

 + API-Interactive Calls                                                             ... equation mismatch [time: 1]

==== Log /tmp/omc-rtest-unknown/openmodelica/interactive-API/interactive_api_calls.mos_temp2081/log-interactive_api_calls.mos
{true}
Evaluating: createModel(A)
true
Evaluating: getErrorString()
""
Evaluating: addComponent(x, Real, A)
true
Evaluating: getErrorString()
""
Evaluating: isModel(A)
true
Evaluating: getErrorString()
""
Evaluating: isRecord(A)
false
Evaluating: getErrorString()
""
Evaluating: isBlock(A)
false
Evaluating: getErrorString()
""
Evaluating: isType(A)
false
Evaluating: getErrorString()
""
Evaluating: isFunction(A)
false
Evaluating: getErrorString()
""
Evaluating: isPackage(A)
false
Evaluating: getErrorString()
""
Evaluating: isClass(A)
false
Evaluating: getErrorString()
""
Evaluating: isOperator(A)
false
Evaluating: getErrorString()
""
Evaluating: isOperatorRecord(A)
false
Evaluating: getErrorString()
""
Evaluating: isOperatorFunction(A)
false
Evaluating: getErrorString()
""
Evaluating: list(A)
"model A
  Real x;
end A;"
Evaluating: getErrorString()
""
Evaluating: setComponentDimensions(A, x, {10, 11, 12})
Ok
Evaluating: getErrorString()
""
Evaluating: list(A)
"model A
  Real x[10, 11, 12];
end A;"
Evaluating: getErrorString()
""
Evaluating: setComponentDimensions(A, x, {1, 2})
Ok
Evaluating: getErrorString()
""
Evaluating: list(A)
"model A
  Real x[1, 2];
end A;"
Evaluating: getErrorString()
""
Evaluating: loadFile("interactive_api_calls.mo")
true
Evaluating: getErrorString()
""
Evaluating: isType(vector3D)
true
Evaluating: getErrorString()
""
Evaluating: isShortDefinition(vector3D)
true
Evaluating: getErrorString()
""
Evaluating: isShortDefinition(C)
false
Evaluating: getErrorString()
""
Evaluating: isEnumeration(C)
false
Evaluating: getErrorString()
""
Evaluating: getEnumerationLiterals(C)
{}
Evaluating: getErrorString()
""
Evaluating: isEnumeration(sizeE)
true
Evaluating: getErrorString()
""
Evaluating: getEnumerationLiterals(sizeE)
{"Small","Medium","Large"}
Evaluating: getErrorString()
""
Evaluating: isReplaceable(ReplaceableClass, "M1")
true
Evaluating: getErrorString()
""
Evaluating: isReplaceable(RealSignal, "SignalType")
true
Evaluating: getErrorString()
""
Evaluating: isProtectedClass(RealSignal, "SignalType")
false
Evaluating: getErrorString()
""
Evaluating: isProtectedClass(ProtectedClass, "M1")
true
Evaluating: getErrorString()
""
Evaluating: getBuiltinType(Resistance)
"Real"
Evaluating: getErrorString()
""
Evaluating: getDerivedClassModifierNames(Resistance)
{"quantity","unit"}
Evaluating: getDerivedClassModifierValue(Resistance, unit)
"\"Ohm\""
Evaluating: getDerivedClassModifierValue(Resistance, quantity)
"\"Resistance\""
Evaluating: getClassInformation(vector3D)
("type","",false,false,false,"openmodelica/interactive-API/interactive_api_calls.mo",false,4,1,4,67,{"3"},false,false,"","",false,"")
Evaluating: getErrorString()
""
Evaluating: getInheritanceCount(vector3D)
1
Evaluating: getErrorString()
""
Evaluating: getNthInheritedClass(vector3D, 1)
Real
Evaluating: getErrorString()
""
Evaluating: getInheritedClasses(vector3D)
{Real}
Evaluating: getNthComponentCondition(M, 1)
""
Evaluating: getErrorString()
""
Evaluating: getNthComponentCondition(M, 2)
"if i > 0"
Evaluating: getErrorString()
""
Evaluating: getNthComponentCondition(M, 3)
Error
Evaluating: getErrorString()
""
Evaluating: getExtendsModifierNames(vector3D, Real)
{start, nominal}
Evaluating: getErrorString()
""
Evaluating: getExtendsModifierValue(vector3D, Real, start)
5
Evaluating: getErrorString()
""
Evaluating: getExtendsModifierValue(vector3D, Real, nominal)
{1, 2, 3, 4, 5}
Evaluating: getErrorString()
""
Evaluating: getClassComment(M)
"A class comment"
Evaluating: getErrorString()
""
Evaluating: getComponentComment(M, r)
"A component comment"
Evaluating: getErrorString()
""
Evaluating: getClassInformation(state1)
("model","",false,false,false,"openmodelica/interactive-API/interactive_api_calls.mo",false,44,1,46,11,{},false,false,"","",true,"")
Evaluating: getErrorString()
""
Evaluating: loadModel(Modelica, {"3.1"})
false
Evaluating: getErrorString()
"Error: Failed to load package Modelica (3.1) using MODELICAPATH /var/lib/jenkins/workspace/OpenModelica_maintenance_v1.13/build/lib/omlibrary.
"
Evaluating: getAnnotationCount(Modelica.Electrical.Analog.Basic.Resistor)
0
Evaluating: getErrorString()
""
Evaluating: getNthAnnotationString(Modelica.Electrical.Analog.Basic.Resistor, 1)
""
Evaluating: getErrorString()
""
Evaluating: getImportCount(Modelica.Mechanics.Rotational)
0
Evaluating: getErrorString()
""
Evaluating: getNthImport(Modelica.Mechanics.Rotational, 1)
{}
Evaluating: getErrorString()
""
Evaluating: getInitialAlgorithmCount(Modelica.Blocks.Sources.BooleanTable)
0
Evaluating: getErrorString()
""
Evaluating: getNthInitialAlgorithm(Modelica.Blocks.Sources.BooleanTable, 1)
""
Evaluating: getErrorString()
""
Evaluating: getAlgorithmCount(Modelica.Blocks.Sources.BooleanTable)
0
Evaluating: getErrorString()
""
Evaluating: getNthAlgorithm(Modelica.Blocks.Sources.BooleanTable, 1)
""
Evaluating: getErrorString()
""
Evaluating: getInitialEquationCount(Modelica.Mechanics.MultiBody.Parts.Body)
0
Evaluating: getErrorString()
""
Evaluating: getNthInitialEquation(Modelica.Mechanics.MultiBody.Parts.Body, 1)
""
Evaluating: getErrorString()
""
Evaluating: getEquationCount(Modelica.Mechanics.MultiBody.Parts.Body)
0
Evaluating: getErrorString()
""
Evaluating: getNthEquation(Modelica.Mechanics.MultiBody.Parts.Body, 1)
""
Evaluating: getErrorString()
""
Evaluating: getTransitions(SimpleSMwithAnnotations)
{{"state1","state2","i > 10","false","true","false","1","Line(true, {0.0, 0.0}, 0, {{-24, 58}, {-16, 50}, {-24, 11}}, {175, 175, 175}, LinePattern.Solid, 0.25, {Arrow.None, Arrow.None}, 3, Smooth.Bezier), Text(true, {0.0, 0.0}, 0, {95, 95, 95}, {0, 0, 0}, LinePattern.Solid, FillPattern.None, 0.25, {{12, -2}, {12, -8}}, \"%condition\", 10, {TextStyle.Bold}, TextAlignment.Left)"},{"state2","state1","i < 1","false","true","false","1","Line(true, {0.0, 0.0}, 0, {{-66, 11}, {-76, 42}, {-64, 58}}, {175, 175, 175}, LinePattern.Solid, 0.25, {Arrow.None, Arrow.None}, 3, Smooth.Bezier), Text(true, {0.0, 0.0}, 0, {95, 95, 95}, {0, 0, 0}, LinePattern.Solid, FillPattern.None, 0.25, {{-6, 4}, {-6, 10}}, \"%condition\", 10, {TextStyle.Bold}, TextAlignment.Right)"}}
Evaluating: getErrorString()
""
Evaluating: getShortDefinitionBaseClassInformation(RealInput)
{Real,"","","unspecified","input",{}}
Evaluating: getErrorString()
""
Evaluating: getShortDefinitionBaseClassInformation(RealInput3)
{Real,"flow","","constant","input",{3}}
Evaluating: getErrorString()
""
Evaluating: getShortDefinitionBaseClassInformation(RealConnect)
{Real,"","stream","unspecified","unspecified",{}}
Evaluating: getErrorString()
""
Evaluating: getExternalFunctionSpecification(TestPack.Ext)
{"C","u","externFunc","x, y, z","",""}
Evaluating: getErrorString()
""
Evaluating: getExternalFunctionSpecification(TestPack.NoExt)
{}
Evaluating: getErrorString()
""
Evaluating: list(TestPack.MyModel)
"model MyModel
  Modelica.Electrical.Analog.Basic.Resistor r1;
  Modelica.Electrical.Analog.Basic.Capacitor c1;
end MyModel;"
Evaluating: getErrorString()
""
Evaluating: getNthComponentModification(TestPack.MyModel, 1)
{$Code()}
Evaluating: getErrorString()
""
Evaluating: setComponentModifierValue(TestPack.MyModel, r1, $Code( = 2))
Ok
Evaluating: getErrorString()
""
Evaluating: list(TestPack.MyModel)
"model MyModel
  Modelica.Electrical.Analog.Basic.Resistor r1 = 2;
  Modelica.Electrical.Analog.Basic.Capacitor c1;
end MyModel;"
Evaluating: getErrorString()
""
Evaluating: getNthComponentModification(TestPack.MyModel, 1)
{$Code( = 2)}
Evaluating: getErrorString()
""
Evaluating: setComponentModifierValue(TestPack.MyModel, r1.start, $Code( = 2))
Ok
Evaluating: getErrorString()
""
Evaluating: list(TestPack.MyModel)
"model MyModel
  Modelica.Electrical.Analog.Basic.Resistor r1(start = 2) = 2;
  Modelica.Electrical.Analog.Basic.Capacitor c1;
end MyModel;"
Evaluating: getErrorString()
""
Evaluating: setComponentModifierValue(TestPack.MyModel, r1, $Code( = Resistor(R = 2)))
Ok
Evaluating: getErrorString()
""
Evaluating: list(TestPack.MyModel)
"model MyModel
  Modelica.Electrical.Analog.Basic.Resistor r1(start = 2) = Resistor(R = 2);
  Modelica.Electrical.Analog.Basic.Capacitor c1;
end MyModel;"
Evaluating: getErrorString()
""
Evaluating: getNthComponentModification(TestPack.MyModel, 1)
{$Code((start = 2) = Resistor(R = 2))}
Evaluating: getErrorString()
""
Evaluating: setComponentModifierValue(TestPack.MyModel, r1.min, $Code( = 10))
Ok
Evaluating: getErrorString()
""
Evaluating: list(TestPack.MyModel)
"model MyModel
  Modelica.Electrical.Analog.Basic.Resistor r1(start = 2, min = 10) = Resistor(R = 2);
  Modelica.Electrical.Analog.Basic.Capacitor c1;
end MyModel;"
Evaluating: getErrorString()
""
Evaluating: getComponentModifierNames(TestPack.MyModel, "r1")
{"start","min"}
Evaluating: getErrorString()
""
Evaluating: getNthComponentModification(TestPack.MyModel, 1)
{$Code((start = 2, min = 10) = Resistor(R = 2))}
Evaluating: getErrorString()
""
Evaluating: getComponentModifierValue(TestPack.MyModel, r1)
"Resistor(R = 2)"
Evaluating: getErrorString()
""
Evaluating: getComponentModifierValue(TestPack.MyModel, r1.start)
"2"
Evaluating: getErrorString()
""
Evaluating: getComponentModifierValue(TestPack.MyModel, r1.min)
"10"
Evaluating: getErrorString()
""
Evaluating: list(TestPack.MyModel)
"model MyModel
  Modelica.Electrical.Analog.Basic.Resistor r1(start = 2, min = 10) = Resistor(R = 2);
  Modelica.Electrical.Analog.Basic.Capacitor c1;
end MyModel;"
Evaluating: getErrorString()
""
Evaluating: setComponentModifierValue(TestPack.MyModel, r1.min, $Code())
Ok
Evaluating: getErrorString()
""
Evaluating: list(TestPack.MyModel)
"model MyModel
  Modelica.Electrical.Analog.Basic.Resistor r1(start = 2) = Resistor(R = 2);
  Modelica.Electrical.Analog.Basic.Capacitor c1;
end MyModel;"
Evaluating: getErrorString()
""
Evaluating: setComponentModifierValue(TestPack.MyModel, r1, $Code())
Ok
Evaluating: getErrorString()
""
Evaluating: list(TestPack.MyModel)
"model MyModel
  Modelica.Electrical.Analog.Basic.Resistor r1(start = 2);
  Modelica.Electrical.Analog.Basic.Capacitor c1;
end MyModel;"
Evaluating: getErrorString()
""
Evaluating: setComponentModifierValue(TestPack.MyModel, r1.start, $Code())
Ok
Evaluating: getErrorString()
""
Evaluating: list(TestPack.MyModel)
"model MyModel
  Modelica.Electrical.Analog.Basic.Resistor r1;
  Modelica.Electrical.Analog.Basic.Capacitor c1;
end MyModel;"
Evaluating: getErrorString()
""
Evaluating: codeToString($Code( = 1 + 2))
" = 1 + 2"
Evaluating: getErrorString()
""
Evaluating: deleteClass(ModelicaServices)
false
Evaluating: loadModel(Modelica, {"3.2.1"})
false
Evaluating: getErrorString()
"Error: Failed to load package Modelica (3.2.1) using MODELICAPATH /var/lib/jenkins/workspace/OpenModelica_maintenance_v1.13/build/lib/omlibrary.
"
Evaluating: getClassRestriction(Modelica.UsersGuide.Conventions.Documentation.Format.Code)
""
Evaluating: getErrorString()
""
Evaluating: getClassInformation(Modelica.UsersGuide.Conventions.Documentation.Format.Code)
("","",false,false,false,"",false,0,0,0,0,{},false,false,"","",false,"")
Evaluating: getErrorString()
""
Evaluating: list(Modelica.UsersGuide.Conventions.Documentation.Format.Code)
""
Evaluating: getErrorString()
""
Evaluating: buildModel(M1)
{"",""}
Evaluating: getMessagesStringInternal()
{record OpenModelica.Scripting.ErrorMessage
    info = record OpenModelica.Scripting.SourceInfo
    filename = "",
    readonly = false,
    lineStart = 0,
    columnStart = 0,
    lineEnd = 0,
    columnEnd = 0
end OpenModelica.Scripting.SourceInfo;,
    message = "Error occurred while flattening model M1",
    kind = .OpenModelica.Scripting.ErrorKind.translation,
    level = .OpenModelica.Scripting.ErrorLevel.error,
    id = 89
end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
    info = record OpenModelica.Scripting.SourceInfo
    filename = "openmodelica/interactive-API/interactive_api_calls.mo",
    readonly = false,
    lineStart = 41,
    columnStart = 3,
    lineEnd = 41,
    columnEnd = 70
end OpenModelica.Scripting.SourceInfo;,
    message = "Class Modelica.Electrical.Analog.Basic.Resistor not found in scope M1.",
    kind = .OpenModelica.Scripting.ErrorKind.translation,
    level = .OpenModelica.Scripting.ErrorLevel.error,
    id = 3
end OpenModelica.Scripting.ErrorMessage;}
Evaluating: clear()
true
Evaluating: loadModel(Modelica, {"3.2.1"})
false
Evaluating: getMessagesStringInternal()
{record OpenModelica.Scripting.ErrorMessage
    info = record OpenModelica.Scripting.SourceInfo
    filename = "",
    readonly = false,
    lineStart = 0,
    columnStart = 0,
    lineEnd = 0,
    columnEnd = 0
end OpenModelica.Scripting.SourceInfo;,
    message = "Failed to load package Modelica (3.2.1) using MODELICAPATH /var/lib/jenkins/workspace/OpenModelica_maintenance_v1.13/build/lib/omlibrary.",
    kind = .OpenModelica.Scripting.ErrorKind.scripting,
    level = .OpenModelica.Scripting.ErrorLevel.error,
    id = 184
end OpenModelica.Scripting.ErrorMessage;}
Evaluating: loadModel(ThermoSysPro)
false
Evaluating: getMessagesStringInternal()
{record OpenModelica.Scripting.ErrorMessage
    info = record OpenModelica.Scripting.SourceInfo
    filename = "",
    readonly = false,
    lineStart = 0,
    columnStart = 0,
    lineEnd = 0,
    columnEnd = 0
end OpenModelica.Scripting.SourceInfo;,
    message = "Failed to load package ThermoSysPro (default) using MODELICAPATH /var/lib/jenkins/workspace/OpenModelica_maintenance_v1.13/build/lib/omlibrary.",
    kind = .OpenModelica.Scripting.ErrorKind.scripting,
    level = .OpenModelica.Scripting.ErrorLevel.error,
    id = 184
end OpenModelica.Scripting.ErrorMessage;}
Evaluating: translateModel(ThermoSysPro.Examples.SimpleExamples.TestCentrifugalPumpWaterSolution)
false
Evaluating: getMessagesStringInternal()
{record OpenModelica.Scripting.ErrorMessage
    info = record OpenModelica.Scripting.SourceInfo
    filename = "",
    readonly = false,
    lineStart = 0,
    columnStart = 0,
    lineEnd = 0,
    columnEnd = 0
end OpenModelica.Scripting.SourceInfo;,
    message = "Class ThermoSysPro.Examples.SimpleExamples.TestCentrifugalPumpWaterSolution not found in scope <TOP>.",
    kind = .OpenModelica.Scripting.ErrorKind.translation,
    level = .OpenModelica.Scripting.ErrorLevel.error,
    id = 3
end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
    info = record OpenModelica.Scripting.SourceInfo
    filename = "",
    readonly = false,
    lineStart = 0,
    columnStart = 0,
    lineEnd = 0,
    columnEnd = 0
end OpenModelica.Scripting.SourceInfo;,
    message = "Failed to load package ThermoSysPro (default) using MODELICAPATH /var/lib/jenkins/workspace/OpenModelica_maintenance_v1.13/build/lib/omlibrary.",
    kind = .OpenModelica.Scripting.ErrorKind.scripting,
    level = .OpenModelica.Scripting.ErrorLevel.error,
    id = 184
end OpenModelica.Scripting.ErrorMessage;}
Evaluating: translateModel(ThermoSysPro.Examples.SimpleExamples.TestCentrifugalPumpWaterSolution)
false
Evaluating: getMessagesStringInternal(unique = false)
{record OpenModelica.Scripting.ErrorMessage
    info = record OpenModelica.Scripting.SourceInfo
    filename = "",
    readonly = false,
    lineStart = 0,
    columnStart = 0,
    lineEnd = 0,
    columnEnd = 0
end OpenModelica.Scripting.SourceInfo;,
    message = "Class ThermoSysPro.Examples.SimpleExamples.TestCentrifugalPumpWaterSolution not found in scope <TOP>.",
    kind = .OpenModelica.Scripting.ErrorKind.translation,
    level = .OpenModelica.Scripting.ErrorLevel.error,
    id = 3
end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
    info = record OpenModelica.Scripting.SourceInfo
    filename = "",
    readonly = false,
    lineStart = 0,
    columnStart = 0,
    lineEnd = 0,
    columnEnd = 0
end OpenModelica.Scripting.SourceInfo;,
    message = "Failed to load package ThermoSysPro (default) using MODELICAPATH /var/lib/jenkins/workspace/OpenModelica_maintenance_v1.13/build/lib/omlibrary.",
    kind = .OpenModelica.Scripting.ErrorKind.scripting,
    level = .OpenModelica.Scripting.ErrorLevel.error,
    id = 184
end OpenModelica.Scripting.ErrorMessage;}

Equation mismatch: diff says:
--- /tmp/omc-rtest-unknown/openmodelica/interactive-API/interactive_api_calls.mos_temp2081/equations-expected2019-01-21 18:19:13.837160903 +0000
+++ /tmp/omc-rtest-unknown/openmodelica/interactive-API/interactive_api_calls.mos_temp2081/equations-got2019-01-21 18:19:14.081158420 +0000
@@ -180,148 +180,60 @@
 Evaluating: getClassInformation(state1)
 ("model","",false,false,false,"openmodelica/interactive-API/interactive_api_calls.mo",false,44,1,46,11,{},false,false,"","",true,"")
 Evaluating: getErrorString()
 ""
 Evaluating: loadModel(Modelica, {"3.1"})
-true
+false
 Evaluating: getErrorString()
-""
+"Error: Failed to load package Modelica (3.1) using MODELICAPATH /var/lib/jenkins/workspace/OpenModelica_maintenance_v1.13/build/lib/omlibrary.
+"
 Evaluating: getAnnotationCount(Modelica.Electrical.Analog.Basic.Resistor)
-1
+0
 Evaluating: getErrorString()
 ""
 Evaluating: getNthAnnotationString(Modelica.Electrical.Analog.Basic.Resistor, 1)
-"annotation(
-Documentation(info = \"<HTML>
-<P>
-The linear resistor connects the branch voltage <i>v</i> with the
-branch current <i>i</i> by <i>i*R = v</i>.
-The Resistance <i>R</i> is allowed to be positive, zero, or negative.
-</P>
-</HTML>
-\", revisions = \"<html>
-<ul>
-<li><i> August 07, 2009   </i>
-by Anton Haumer<br> temperature dependency of resistance added<br>
-</li>
-<li><i> March 11, 2009   </i>
-by Christoph Clauss<br> conditional heat port added<br>
-</li>
-<li><i> 1998   </i>
-by Christoph Clauss<br> initially implemented<br>
-</li>
-</ul>
-</html>\"),
-Icon(coordinateSystem(preserveAspectRatio = true, extent = {{-100, -100}, {100, 100}}, grid = {2, 2}), graphics = {Rectangle(extent = {{-70, 30}, {70, -30}}, lineColor = {0, 0, 255}, fillColor = {255, 255, 255}, fillPattern = FillPattern.Solid), Line(points = {{-90, 0}, {-70, 0}}, color = {0, 0, 255}), Line(points = {{70, 0}, {90, 0}}, color = {0, 0, 255}), Text(extent = {{-144, -40}, {142, -72}}, lineColor = {0, 0, 0}, textString = \"R=%R\"), Line(visible = useHeatPort, points = {{0, -100}, {0, -30}}, color = {127, 0, 0}, smooth = Smooth.None, pattern = LinePattern.Dot), Text(extent = {{-152, 87}, {148, 47}}, textString = \"%name\", lineColor = {0, 0, 255})}),
-Diagram(coordinateSystem(preserveAspectRatio = true, extent = {{-100, -100}, {100, 100}}, grid = {2, 2}), graphics = {Rectangle(extent = {{-70, 30}, {70, -30}}, lineColor = {0, 0, 255}), Line(points = {{-96, 0}, {-70, 0}}, color = {0, 0, 255}), Line(points = {{70, 0}, {96, 0}}, color = {0, 0, 255})}));"
+""
 Evaluating: getErrorString()
 ""
 Evaluating: getImportCount(Modelica.Mechanics.Rotational)
-1
+0
 Evaluating: getErrorString()
 ""
 Evaluating: getNthImport(Modelica.Mechanics.Rotational, 1)
-{"Modelica.SIunits","SI","named"}
+{}
 Evaluating: getErrorString()
 ""
 Evaluating: getInitialAlgorithmCount(Modelica.Blocks.Sources.BooleanTable)
-1
+0
 Evaluating: getErrorString()
 ""
 Evaluating: getNthInitialAlgorithm(Modelica.Blocks.Sources.BooleanTable, 1)
-"(index, nextTime, y) := getFirstIndex(table, time, startValue);"
+""
 Evaluating: getErrorString()
 ""
 Evaluating: getAlgorithmCount(Modelica.Blocks.Sources.BooleanTable)
-1
+0
 Evaluating: getErrorString()
 ""
 Evaluating: getNthAlgorithm(Modelica.Blocks.Sources.BooleanTable, 1)
-"when time >= pre(nextTime) and n > 0 then
-if index < n then
-index := index + 1;
-nextTime := table[index];
-y := not y;
-elseif index == n then
-index := index + 1;
-y := not y;
-end if;
-end when;"
+""
 Evaluating: getErrorString()
 ""
 Evaluating: getInitialEquationCount(Modelica.Mechanics.MultiBody.Parts.Body)
-1
+0
 Evaluating: getErrorString()
 ""
 Evaluating: getNthInitialEquation(Modelica.Mechanics.MultiBody.Parts.Body, 1)
-"if angles_fixed then
-// Initialize positional variables
-if not Connections.isRoot(frame_a.R) then
-// frame_a.R is computed somewhere else
-zeros(3) = Frames.Orientation.equalityConstraint(frame_a.R, R_start);
-elseif useQuaternions then
-// frame_a.R is computed from quaternions Q
-zeros(3) = Frames.Quaternions.Orientation.equalityConstraint(Q, Q_start);
-else
-// frame_a.R is computed from the 3 angles 'phi'
-phi = phi_start;
-end if;
-end if;"
+""
 Evaluating: getErrorString()
 ""
 Evaluating: getEquationCount(Modelica.Mechanics.MultiBody.Parts.Body)
-1
+0
 Evaluating: getErrorString()
 ""
 Evaluating: getNthEquation(Modelica.Mechanics.MultiBody.Parts.Body, 1)
-"if enforceStates then
-Connections.root(frame_a.R);
-else
-Connections.potentialRoot(frame_a.R);
-end if;
-r_0 = frame_a.r_0;
-if not Connections.isRoot(frame_a.R) then
-// Body does not have states
-// Dummies
-Q = {0, 0, 0, 1};
-phi = zeros(3);
-phi_d = zeros(3);
-phi_dd = zeros(3);
-elseif useQuaternions then
-// Use Quaternions as states (with dynamic state selection)
-frame_a.R = Frames.from_Q(Q, Frames.Quaternions.angularVelocity2(Q, der(Q)));
-{0} = Frames.Quaternions.orientationConstraint(Q);
-// Dummies
-phi = zeros(3);
-phi_d = zeros(3);
-phi_dd = zeros(3);
-else
-// Use Cardan angles as states
-phi_d = der(phi);
-phi_dd = der(phi_d);
-frame_a.R = Frames.axesRotations(sequence_angleStates, phi, phi_d);
-// Dummies
-Q = {0, 0, 0, 1};
-end if;
-// gravity acceleration at center of mass resolved in world frame
-g_0 = world.gravityAcceleration(frame_a.r_0 + Frames.resolve1(frame_a.R, r_CM));
-// translational kinematic differential equations
-v_0 = der(frame_a.r_0);
-a_0 = der(v_0);
-// rotational kinematic differential equations
-w_a = Frames.angularVelocity2(frame_a.R);
-z_a = der(w_a);
-/* Newton/Euler equations with respect to center of mass
-a_CM = a_a + cross(z_a, r_CM) + cross(w_a, cross(w_a, r_CM));
-f_CM = m*(a_CM - g_a);
-t_CM = I*z_a + cross(w_a, I*w_a);
-frame_a.f = f_CM
-frame_a.t = t_CM + cross(r_CM, f_CM);
-Inserting the first three equations in the last two results in:
-*/
-frame_a.f = m * (Frames.resolve2(frame_a.R, a_0 - g_0) + cross(z_a, r_CM) + cross(w_a, cross(w_a, r_CM)));
-frame_a.t = I * z_a + cross(w_a, I * w_a) + cross(r_CM, frame_a.f);"
+""
 Evaluating: getErrorString()
 ""
 Evaluating: getTransitions(SimpleSMwithAnnotations)
 {{"state1","state2","i > 10","false","true","false","1","Line(true, {0.0, 0.0}, 0, {{-24, 58}, {-16, 50}, {-24, 11}}, {175, 175, 175}, LinePattern.Solid, 0.25, {Arrow.None, Arrow.None}, 3, Smooth.Bezier), Text(true, {0.0, 0.0}, 0, {95, 95, 95}, {0, 0, 0}, LinePattern.Solid, FillPattern.None, 0.25, {{12, -2}, {12, -8}}, \"%condition\", 10, {TextStyle.Bold}, TextAlignment.Left)"},{"state2","state1","i < 1","false","true","false","1","Line(true, {0.0, 0.0}, 0, {{-66, 11}, {-76, 42}, {-64, 58}}, {175, 175, 175}, LinePattern.Solid, 0.25, {Arrow.None, Arrow.None}, 3, Smooth.Bezier), Text(true, {0.0, 0.0}, 0, {95, 95, 95}, {0, 0, 0}, LinePattern.Solid, FillPattern.None, 0.25, {{-6, 4}, {-6, 10}}, \"%condition\", 10, {TextStyle.Bold}, TextAlignment.Right)"}}
 Evaluating: getErrorString()
@@ -472,78 +384,26 @@
 Evaluating: codeToString($Code( = 1 + 2))
 " = 1 + 2"
 Evaluating: getErrorString()
 ""
 Evaluating: deleteClass(ModelicaServices)
-true
+false
 Evaluating: loadModel(Modelica, {"3.2.1"})
-true
+false
 Evaluating: getErrorString()
-""
+"Error: Failed to load package Modelica (3.2.1) using MODELICAPATH /var/lib/jenkins/workspace/OpenModelica_maintenance_v1.13/build/lib/omlibrary.
+"
 Evaluating: getClassRestriction(Modelica.UsersGuide.Conventions.Documentation.Format.Code)
-"class"
+""
 Evaluating: getErrorString()
 ""
 Evaluating: getClassInformation(Modelica.UsersGuide.Conventions.Documentation.Format.Code)
-("class","Code",false,false,false,"Modelica 3.2.1/package.mo",false,572,9,625,17,{},false,false,"","",false,"")
+("","",false,false,false,"",false,0,0,0,0,{},false,false,"","",false,"")
 Evaluating: getErrorString()
 ""
 Evaluating: list(Modelica.UsersGuide.Conventions.Documentation.Format.Code)
-"class Code \"Code\"
-extends Modelica.Icons.Information;
-annotation(
-Documentation(info = \"<html>
-<p>
-<a href=\\\"modelica://Modelica.UsersGuide.Conventions.ModelicaCode\\\">Modelica code</a> conventions of class and instance names,
-parameters and variables are specified separately. In this section it is summarized how to refer to
-Modelica code in the HTML documentation.
-</p>
-
-<ol>
-<li> For constants, parameters and variables in code segments <code>&lt;code&gt;</code> and <code>&lt;/code&gt;</code>
-should to be used, e.g., <br>
-<code><b>parameter</b> Modelica.SIunits.Time tStart \\\"Start time\\\"</code></li>
-<li> Write multi or single line code segments using <code>&lt;pre&gt;</code> and <code>&lt;/pre&gt;</code>.</li>
-<li> Multi line or single line code shall not be indented.</li>
-<li> Inline code segments may be typeset with <code>&lt;code&gt;</code> and <code>&lt;/code&gt;</code>.</li>
-<li> In code segments use bold to emphasize Modelica keywords.</li>
-</ol>
-
-<h5>Example 1</h5>
-
-<pre>
-&lt;pre&gt;
-&lt;b&gt;connector&lt;/b&gt; Frame
-...
-&lt;b&gt;flow&lt;/b&gt; SI.Force f[Woehrnschimmel1998] &lt;b&gt;annotation&lt;/b&gt;(unassignedMessage=\\\"...\\\");
-&lt;b&gt;end&lt;/b&gt; Frame;
-&lt;/pre&gt;</pre>
-
-<p>appears as</p>
-
-<pre>
-<b>connector</b> Frame
-...
-<b>flow</b> SI.Force f[Woehrnschimmel1998] <b>annotation</b>(unassignedMessage=\\\"...\\\");
-<b>end</b> Frame;
-</pre>
-
-<h5>Example 2</h5>
-
-<pre>
-&lt;pre&gt;
-&lt;b&gt;parameter&lt;/b&gt; Modelica.SIunits.Conductance G=1 &quot;Conductance&quot;;
-&lt;/pre&gt;
-</pre>
-
-<p>appears as</p>
-
-<pre>
-<b>parameter</b> Modelica.SIunits.Conductance G=1 &quot;Conductance&quot;;
-</pre>
-</html>\"));
-end Code;"
+""
 Evaluating: getErrorString()
 ""
 Evaluating: buildModel(M1)
 {"",""}
 Evaluating: getMessagesStringInternal()
@@ -567,327 +427,106 @@
 lineStart = 41,
 columnStart = 3,
 lineEnd = 41,
 columnEnd = 70
 end OpenModelica.Scripting.SourceInfo;,
-message = "Variable resistor1: In modifier (phi(start = 1), class or component start), class or component phi not found in <Modelica.Electrical.Analog.Basic.Resistor$resistor1>.",
+message = "Class Modelica.Electrical.Analog.Basic.Resistor not found in scope M1.",
 kind = .OpenModelica.Scripting.ErrorKind.translation,
 level = .OpenModelica.Scripting.ErrorLevel.error,
-id = 515
+id = 3
 end OpenModelica.Scripting.ErrorMessage;}
 Evaluating: clear()
 true
 Evaluating: loadModel(Modelica, {"3.2.1"})
-true
-Evaluating: getMessagesStringInternal()
-{}
-Evaluating: loadModel(ThermoSysPro)
-true
-Evaluating: getMessagesStringInternal()
-{}
-Evaluating: translateModel(ThermoSysPro.Examples.SimpleExamples.TestCentrifugalPumpWaterSolution)
-true
+false
 Evaluating: getMessagesStringInternal()
 {record OpenModelica.Scripting.ErrorMessage
 info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
-readonly = false,
-lineStart = 45,
-columnStart = 3,
-lineEnd = 85,
-columnEnd = 26
-end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionOutlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
+filename = "",
 readonly = false,
-lineStart = 3,
-columnStart = 3,
-lineEnd = 43,
-columnEnd = 25
+lineStart = 0,
+columnStart = 0,
+lineEnd = 0,
+columnEnd = 0
 end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionInlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
+message = "Failed to load package Modelica (3.2.1) using MODELICAPATH /var/lib/jenkins/workspace/OpenModelica_maintenance_v1.13/build/lib/omlibrary.",
+kind = .OpenModelica.Scripting.ErrorKind.scripting,
+level = .OpenModelica.Scripting.ErrorLevel.error,
+id = 184
+end OpenModelica.Scripting.ErrorMessage;}
+Evaluating: loadModel(ThermoSysPro)
+false
+Evaluating: getMessagesStringInternal()
+{record OpenModelica.Scripting.ErrorMessage
 info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/Properties/WaterSteam/Common.mo",
+filename = "",
 readonly = false,
-lineStart = 1185,
-columnStart = 3,
-lineEnd = 1241,
-columnEnd = 26
+lineStart = 0,
+columnStart = 0,
+lineEnd = 0,
+columnEnd = 0
 end OpenModelica.Scripting.SourceInfo;,
-message = "pro.x was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 245
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
+message = "Failed to load package ThermoSysPro (default) using MODELICAPATH /var/lib/jenkins/workspace/OpenModelica_maintenance_v1.13/build/lib/omlibrary.",
+kind = .OpenModelica.Scripting.ErrorKind.scripting,
+level = .OpenModelica.Scripting.ErrorLevel.error,
+id = 184
+end OpenModelica.Scripting.ErrorMessage;}
+Evaluating: translateModel(ThermoSysPro.Examples.SimpleExamples.TestCentrifugalPumpWaterSolution)
+false
+Evaluating: getMessagesStringInternal()
+{record OpenModelica.Scripting.ErrorMessage
 info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/Properties/WaterSteam/Common.mo",
+filename = "",
 readonly = false,
-lineStart = 703,
-columnStart = 3,
-lineEnd = 754,
-columnEnd = 22
+lineStart = 0,
+columnStart = 0,
+lineEnd = 0,
+columnEnd = 0
 end OpenModelica.Scripting.SourceInfo;,
-message = "pro.x was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.",
+message = "Class ThermoSysPro.Examples.SimpleExamples.TestCentrifugalPumpWaterSolution not found in scope <TOP>.",
 kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 245
+level = .OpenModelica.Scripting.ErrorLevel.error,
+id = 3
 end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
 info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
+filename = "",
 readonly = false,
-lineStart = 45,
-columnStart = 3,
-lineEnd = 85,
-columnEnd = 26
+lineStart = 0,
+columnStart = 0,
+lineEnd = 0,
+columnEnd = 0
 end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionOutlet$pump$C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
+message = "Failed to load package ThermoSysPro (default) using MODELICAPATH /var/lib/jenkins/workspace/OpenModelica_maintenance_v1.13/build/lib/omlibrary.",
+kind = .OpenModelica.Scripting.ErrorKind.scripting,
+level = .OpenModelica.Scripting.ErrorLevel.error,
+id = 184
 end OpenModelica.Scripting.ErrorMessage;}
 Evaluating: translateModel(ThermoSysPro.Examples.SimpleExamples.TestCentrifugalPumpWaterSolution)
-true
+false
 Evaluating: getMessagesStringInternal(unique = false)
 {record OpenModelica.Scripting.ErrorMessage
 info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
-readonly = false,
-lineStart = 45,
-columnStart = 3,
-lineEnd = 85,
-columnEnd = 26
-end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionOutlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
-readonly = false,
-lineStart = 3,
-columnStart = 3,
-lineEnd = 43,
-columnEnd = 25
-end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionInlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
-readonly = false,
-lineStart = 45,
-columnStart = 3,
-lineEnd = 85,
-columnEnd = 26
-end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionOutlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
-readonly = false,
-lineStart = 3,
-columnStart = 3,
-lineEnd = 43,
-columnEnd = 25
-end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionInlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
-readonly = false,
-lineStart = 45,
-columnStart = 3,
-lineEnd = 85,
-columnEnd = 26
-end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionOutlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
-readonly = false,
-lineStart = 3,
-columnStart = 3,
-lineEnd = 43,
-columnEnd = 25
-end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionInlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
-readonly = false,
-lineStart = 45,
-columnStart = 3,
-lineEnd = 85,
-columnEnd = 26
-end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionOutlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
-readonly = false,
-lineStart = 3,
-columnStart = 3,
-lineEnd = 43,
-columnEnd = 25
-end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionInlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
-readonly = false,
-lineStart = 45,
-columnStart = 3,
-lineEnd = 85,
-columnEnd = 26
-end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionOutlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
-readonly = false,
-lineStart = 3,
-columnStart = 3,
-lineEnd = 43,
-columnEnd = 25
-end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionInlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
-readonly = false,
-lineStart = 45,
-columnStart = 3,
-lineEnd = 85,
-columnEnd = 26
-end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionOutlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
-readonly = false,
-lineStart = 3,
-columnStart = 3,
-lineEnd = 43,
-columnEnd = 25
-end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionInlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/Properties/WaterSteam/Common.mo",
-readonly = false,
-lineStart = 1185,
-columnStart = 3,
-lineEnd = 1241,
-columnEnd = 26
-end OpenModelica.Scripting.SourceInfo;,
-message = "pro.x was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 245
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/Properties/WaterSteam/Common.mo",
-readonly = false,
-lineStart = 703,
-columnStart = 3,
-lineEnd = 754,
-columnEnd = 22
-end OpenModelica.Scripting.SourceInfo;,
-message = "pro.x was used before it was defined (given a value). Additional such uses may exist for the variable, but some messages were suppressed.",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 245
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
-readonly = false,
-lineStart = 45,
-columnStart = 3,
-lineEnd = 85,
-columnEnd = 26
-end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionOutlet$pump$C2 is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
-readonly = false,
-lineStart = 3,
-columnStart = 3,
-lineEnd = 43,
-columnEnd = 25
-end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionInlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
-end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
-info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
+filename = "",
 readonly = false,
-lineStart = 45,
-columnStart = 3,
-lineEnd = 85,
-columnEnd = 26
+lineStart = 0,
+columnStart = 0,
+lineEnd = 0,
+columnEnd = 0
 end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionOutlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
+message = "Class ThermoSysPro.Examples.SimpleExamples.TestCentrifugalPumpWaterSolution not found in scope <TOP>.",
 kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
+level = .OpenModelica.Scripting.ErrorLevel.error,
+id = 3
 end OpenModelica.Scripting.ErrorMessage;,record OpenModelica.Scripting.ErrorMessage
 info = record OpenModelica.Scripting.SourceInfo
-filename = "ThermoSysPro 3.1/WaterSolution/Connectors.mo",
+filename = "",
 readonly = false,
-lineStart = 3,
-columnStart = 3,
-lineEnd = 43,
-columnEnd = 25
+lineStart = 0,
+columnStart = 0,
+lineEnd = 0,
+columnEnd = 0
 end OpenModelica.Scripting.SourceInfo;,
-message = "Connector .ThermoSysPro.WaterSolution.Connectors.WaterSolutionInlet is not balanced: The number of potential variables (4) is not equal to the number of flow variables (0).",
-kind = .OpenModelica.Scripting.ErrorKind.translation,
-level = .OpenModelica.Scripting.ErrorLevel.warning,
-id = 150
+message = "Failed to load package ThermoSysPro (default) using MODELICAPATH /var/lib/jenkins/workspace/OpenModelica_maintenance_v1.13/build/lib/omlibrary.",
+kind = .OpenModelica.Scripting.ErrorKind.scripting,
+level = .OpenModelica.Scripting.ErrorLevel.error,
+id = 184
 end OpenModelica.Scripting.ErrorMessage;}

Equation mismatch: omc-diff says:
Failed 't' 'f'
Line 185: Text differs:
expected: true
got:      false

== 1 out of 1 tests failed [openmodelica/interactive-API/interactive_api_calls.mos_temp2081, time: 1]