Recursive BuildModel Test

BuildModel Results: 4/4 succeeded

Simulation Results: 3/4 succeeded

Total time taken: 240.2

OpenModelica Version: v1.11.0-dev.73+g8c6ebff

Test started: 2016-08-29 06:26:13

Tested Library: ThermoSysPro 3.1( revision 3.1+OSR-7-g90a7907 )

BuildModel time limit: 660s

Simulation time limit: 480s

Default tolerance: 1e-06

Flags:
setCommandLineOptions("-d=nogen,initialization,backenddaeinfo,discreteinfo,stateselection,execstat");
setMatchingAlgorithm("PFPlusExt");
setIndexReductionMethod("dynamicStateSelection");

Links are provided if getErrorString() or the simulation generates output. The links are coded with red if there were errors, yellow if there were warnings, and normal links if there are only notifications.

Green cells means success. Red is bad and in general signifies a failure.

ModelSimulateTotal buildModelFrontendBackendSimCodeTemplatesCompile
ThermoSysPro.Examples.CombinedCyclePowerPlant.CombinedCycle_Load_100_50133.993.6814.9150.142.3766.70619.58
ThermoSysPro.Examples.CombinedCyclePowerPlant.CombinedCycle_TripTAC130.491.3114.4148.52.8666.16119.4
ThermoSysPro.Examples.SimpleExamples.TestDynamicWaterHeating20.3931.635.21215.80.6761.7188.236
ThermoSysPro.Examples.SimpleExamples.TestWaterHammer (sim) 9.5312.6453.0180.064680.69443.127

Offline version