Failed
simulation_modelica_parameters.parameterTest6.mos (from (result.xml))
Stacktrace
Output mismatch (see stdout for details)
Standard Output
+ parameterTest6 ... equation mismatch [time: 12] ==== Log C:\Users\OPENMO~1\AppData\Local\Temp/omc-rtest-OpenModelica/simulation/modelica/parameters/parameterTest6.mos_temp8137/log-parameterTest6.mos true "" true BEGINNING of preOptModule 'evaluateParameters' ******************************************************************************** ######################################## DAE before evaluating parameters ######################################## unknown partition ======================================== Variables (3) ======================================== 1: z:DISCRETE() type: Integer 2: y:DISCRETE() type: Integer 3: x:DISCRETE() type: Integer Equations (3, 3) ======================================== 1/1 (1): x = if b2 then e1 - p3 else f1 - p3 [dynamic |0|0|0|0|] 2/2 (1): y = f1 + p1 + p2 + p4 + p5 + f2 [dynamic |0|0|0|0|] 3/3 (1): z = a[1] + a[2] + a[3] + s [dynamic |0|0|0|0|] no matching BackendDAEType: simulation Known variables only depending on parameters and constants - globalKnownVars (15) ======================================== 1: pr1:PARAM(protected = true ) = 100 type: Integer 2: a[3]:PARAM() = 1 type: Integer [3] 3: a[2]:PARAM() = 1 type: Integer [3] 4: a[1]:PARAM() = 1 type: Integer [3] 5: s:PARAM(final = true ) = 3 type: Integer 6: e1:PARAM() = if b1 then p3 + p1 else 7 + p2 type: Integer 7: b2:PARAM() = true type: Boolean 8: b1:PARAM() = false type: Boolean 9: f2:PARAM(final = true ) = 10 type: Integer 10: f1:PARAM(final = true ) = p1 type: Integer 11: p5:PARAM() = pr1 type: Integer 12: p4:PARAM() = f1 + p1 type: Integer 13: p3:PARAM() = 5 type: Integer 14: p2:PARAM() = if b1 then e1 + p4 else if b2 then p1 - p3 else e1 - p3 type: Integer 15: p1:PARAM() = 2 type: Integer Structural parameters and parameters with annotation(Evaluate=true) will be evaluated. START evaluating parameters: ================================================================================ Number of parameters: 15 Number of parameters selected for evaluation: 7 Selected parameters for evaluation: 8,7,6,5,4,3,2 Adjacency Matrix (row: equation) ======================================== number of rows: 15 1: 2: 3: 4: 5: 6: 15 14 13 8 7: 8: 9: 10: 15 11: 1 12: 15 10 13: 14: 15 13 12 8 7 6 15: Transposed Adjacency Matrix (row: variable) ======================================== number of rows: 15 1: 11 1 2: 2 3: 3 4: 4 5: 5 6: 14 6 7: 14 7 8: 14 8 6 9: 9 10: 12 10 11: 11 12: 14 12 13: 14 13 6 14: 14 6 15: 15 14 12 10 6 After evaluating the selected parameters: ================================================================================ All replacements: Replacements: (12) ======================================== b1 -> false b2 -> true p1 -> 2 p3 -> 5 f1 -> 2 p4 -> 4 p2 -> -3 e1 -> 4 s -> 3 a[1] -> 1 a[2] -> 1 a[3] -> 1 Replacements that will be replaced in the DAE: Replacements: (12) ======================================== b1 -> false b2 -> true p1 -> 2 p3 -> 5 f1 -> 2 p4 -> 4 p2 -> -3 e1 -> 4 s -> 3 a[1] -> 1 a[2] -> 1 a[3] -> 1 globalKnownVars (15) ======================================== 1: pr1:PARAM(protected = true ) = 100 type: Integer 2: a[3]:PARAM(final = true ) = 1 type: Integer [3] 3: a[2]:PARAM(final = true ) = 1 type: Integer [3] 4: a[1]:PARAM(final = true ) = 1 type: Integer [3] 5: s:PARAM(final = true ) = 3 type: Integer 6: e1:PARAM(final = true ) = 4 type: Integer 7: b2:PARAM(final = true ) = true type: Boolean 8: b1:PARAM(final = true ) = false type: Boolean 9: f2:PARAM(final = true ) = 10 type: Integer 10: f1:PARAM(final = true ) = p1 type: Integer 11: p5:PARAM() = pr1 type: Integer 12: p4:PARAM(final = true ) = f1 + p1 type: Integer 13: p3:PARAM(final = true ) = 5 type: Integer 14: p2:PARAM(final = true ) = if b1 then e1 + p4 else if b2 then p1 - p3 else e1 - p3 type: Integer 15: p1:PARAM(final = true ) = 2 type: Integer mark: 1 markarr: -1,1,1,1,1,1,1,1,-1,1,-1,1,1,1,1 After sorting parameters: ================================================================================ Order: 15 13 10 12 9 8 7 14,6 5 4 3 2 1 11 After replacing the evaluated parameters in parameter bindings: ================================================================================ All replacements: Replacements: (13) ======================================== b1 -> false b2 -> true p1 -> 2 p3 -> 5 f1 -> 2 p4 -> 4 p2 -> -3 e1 -> 4 s -> 3 a[1] -> 1 a[2] -> 1 a[3] -> 1 f2 -> 10 Replacements that will be replaced in the DAE: Replacements: (13) ======================================== b1 -> false b2 -> true p1 -> 2 p3 -> 5 f1 -> 2 p4 -> 4 p2 -> -3 e1 -> 4 s -> 3 a[1] -> 1 a[2] -> 1 a[3] -> 1 f2 -> 10 globalKnownVars (15) ======================================== 1: pr1:PARAM(protected = true ) = 100 type: Integer 2: a[3]:PARAM(final = true ) = 1 type: Integer [3] 3: a[2]:PARAM(final = true ) = 1 type: Integer [3] 4: a[1]:PARAM(final = true ) = 1 type: Integer [3] 5: s:PARAM(final = true ) = 3 type: Integer 6: e1:PARAM(final = true ) = 4 type: Integer 7: b2:PARAM(final = true ) = true type: Boolean 8: b1:PARAM(final = true ) = false type: Boolean 9: f2:PARAM(final = true ) = 10 type: Integer 10: f1:PARAM(final = true ) = 2 type: Integer 11: p5:PARAM() = pr1 type: Integer 12: p4:PARAM(final = true ) = 4 type: Integer 13: p3:PARAM(final = true ) = 5 type: Integer 14: p2:PARAM(final = true ) = -3 type: Integer 15: p1:PARAM(final = true ) = 2 type: Integer mark: 1 markarr: -1,1,1,1,1,1,1,1,-1,1,-1,1,1,1,1 After replacing the evaluated parameters in variable bindings and start attributes: ================================================================================ All replacements: Replacements: (13) ======================================== b1 -> false b2 -> true p1 -> 2 p3 -> 5 f1 -> 2 p4 -> 4 p2 -> -3 e1 -> 4 s -> 3 a[1] -> 1 a[2] -> 1 a[3] -> 1 f2 -> 10 Replacements that will be replaced in the DAE: Replacements: (13) ======================================== b1 -> false b2 -> true p1 -> 2 p3 -> 5 f1 -> 2 p4 -> 4 p2 -> -3 e1 -> 4 s -> 3 a[1] -> 1 a[2] -> 1 a[3] -> 1 f2 -> 10 globalKnownVars (15) ======================================== 1: pr1:PARAM(protected = true ) = 100 type: Integer 2: a[3]:PARAM(final = true ) = 1 type: Integer [3] 3: a[2]:PARAM(final = true ) = 1 type: Integer [3] 4: a[1]:PARAM(final = true ) = 1 type: Integer [3] 5: s:PARAM(final = true ) = 3 type: Integer 6: e1:PARAM(final = true ) = 4 type: Integer 7: b2:PARAM(final = true ) = true type: Boolean 8: b1:PARAM(final = true ) = false type: Boolean 9: f2:PARAM(final = true ) = 10 type: Integer 10: f1:PARAM(final = true ) = 2 type: Integer 11: p5:PARAM() = pr1 type: Integer 12: p4:PARAM(final = true ) = 4 type: Integer 13: p3:PARAM(final = true ) = 5 type: Integer 14: p2:PARAM(final = true ) = -3 type: Integer 15: p1:PARAM(final = true ) = 2 type: Integer mark: 1 markarr: -1,1,1,1,1,1,1,1,-1,1,-1,1,1,1,1 ######################################## DAE after replacing the evaluated parameters ######################################## unknown partition ======================================== Variables (3) ======================================== 1: z:DISCRETE() type: Integer 2: y:DISCRETE() type: Integer 3: x:DISCRETE() type: Integer Equations (3, 3) ======================================== 1/1 (1): x = -1 [dynamic |0|0|0|0|] 2/2 (1): y = 15 + p5 [dynamic |0|0|0|0|] 3/3 (1): z = 6 [dynamic |0|0|0|0|] no matching BackendDAEType: simulation Known variables only depending on parameters and constants - globalKnownVars (15) ======================================== 1: pr1:PARAM(protected = true ) = 100 type: Integer 2: a[3]:PARAM(final = true ) = 1 type: Integer [3] 3: a[2]:PARAM(final = true ) = 1 type: Integer [3] 4: a[1]:PARAM(final = true ) = 1 type: Integer [3] 5: s:PARAM(final = true ) = 3 type: Integer 6: e1:PARAM(final = true ) = 4 type: Integer 7: b2:PARAM(final = true ) = true type: Boolean 8: b1:PARAM(final = true ) = false type: Boolean 9: f2:PARAM(final = true ) = 10 type: Integer 10: f1:PARAM(final = true ) = 2 type: Integer 11: p5:PARAM() = pr1 type: Integer 12: p4:PARAM(final = true ) = 4 type: Integer 13: p3:PARAM(final = true ) = 5 type: Integer 14: p2:PARAM(final = true ) = -3 type: Integer 15: p1:PARAM(final = true ) = 2 type: Integer END of preOptModule 'evaluateParameters' ******************************************************************************** record SimulationResult resultFile = "parameterTest6_res.mat", simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-6, method = 'dassl', fileNamePrefix = 'parameterTest6', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = '-output=p1,p2,p3,p4,p5,f1,f2,b1,b2,e1,s,a[1],a[2],a[3],pr1,x,y,z'", messages = "LOG_SUCCESS | info | The initialization finished successfully without homotopy method. time=1,p1=2,p2=-3,p3=5,p4=4,p5=100,f1=2,f2=10,b1=0,b2=1,e1=4,s=3,a[1]=1,a[2]=1,a[3]=1,pr1=100,x=-1,y=115,z=6 LOG_SUCCESS | info | The simulation finished successfully. " end SimulationResult; "" 1 "" '' Equation mismatch: diff says: --- "C:\\Users\\OPENMO~1\\AppData\\Local\\Temp/omc-rtest-OpenModelica/simulation/modelica/parameters/parameterTest6.mos_temp8137/equations-expected"2024-09-23 17:05:00.143080800 +0200 +++ "C:\\Users\\OPENMO~1\\AppData\\Local\\Temp/omc-rtest-OpenModelica/simulation/modelica/parameters/parameterTest6.mos_temp8137/equations-got"2024-09-23 17:05:12.666079800 +0200 @@ -350,21 +350,14 @@ END of preOptModule 'evaluateParameters' ******************************************************************************** record SimulationResult resultFile = "parameterTest6_res.mat", -simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'parameterTest6', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = '-output=p1,p2,p3,p4,p5,f1,f2,b1,b2,e1,s,a[1],a[2],a[3],pr1,x,y,z'", +simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-6, method = 'dassl', fileNamePrefix = 'parameterTest6', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = '-output=p1,p2,p3,p4,p5,f1,f2,b1,b2,e1,s,a[1],a[2],a[3],pr1,x,y,z'", messages = "LOG_SUCCESS | info | The initialization finished successfully without homotopy method. time=1,p1=2,p2=-3,p3=5,p4=4,p5=100,f1=2,f2=10,b1=0,b2=1,e1=4,s=3,a[1]=1,a[2]=1,a[3]=1,pr1=100,x=-1,y=115,z=6 LOG_SUCCESS | info | The simulation finished successfully. " end SimulationResult; "" -LOG_STDOUT | warning | It is not possible to override the following quantity: f2 -| | | | It seems to be structural, final, protected or evaluated or has a non-constant binding. -LOG_STDOUT | warning | It is not possible to override the following quantity: s -| | | | It seems to be structural, final, protected or evaluated or has a non-constant binding. -LOG_SUCCESS | info | The initialization finished successfully without homotopy method. -time=1,p1=2,p2=-3,p3=5,p4=4,p5=100,f1=2,f2=10,b1=0,b2=1,e1=4,s=3,a[1]=1,a[2]=1,a[3]=1,pr1=100,x=-1,y=115,z=6 -LOG_SUCCESS | info | The simulation finished successfully. -0 +1 "" '' Equation mismatch: omc-diff says: Line 362: Lexical token differs: expected: LOG_STDOUT | warning | It is not possible to override the following quantity: f got: 1 == 1 out of 1 tests failed [simulation/modelica/parameters/parameterTest6.mos_temp8137, time: 12]