OMEdit – OpenModelica Connection Editor¶
OMEdit – OpenModelica Connection Editor is the new Graphical User Interface for graphical model editing in OpenModelica. It is implemented in C++ using the Qt graphical user interface library and supports the Modelica Standard Library that is included in the latest OpenModelica installation. This chapter gives a brief introduction to OMEdit and also demonstrates how to create a DCMotor model using the editor.
OMEdit provides several user friendly features for creating, browsing, editing, and simulating models:
Modeling – Easy model creation for Modelica models.
Pre-defined models – Browsing the Modelica Standard library to access the provided models.
User defined models – Users can create their own models for immediate usage and later reuse.
Component interfaces – Smart connection editing for drawing and editing connections between model interfaces.
Simulation – Subsystem for running simulations and specifying simulation parameters start and stop time, etc.
Plotting – Interface to plot variables from simulated models.
Starting OMEdit¶
A splash screen similar to the one shown in Figure 5 will appear indicating that it is starting OMEdit. The executable is found in different places depending on the platform (see below).
Figure 5 OMEdit Splash Screen.¶
Microsoft Windows¶
OMEdit can be launched using the executable placed in OpenModelicaInstallationDirectory/bin/OMEdit/OMEdit.exe. Alternately, choose OpenModelica > OpenModelica Connection Editor from the start menu in Windows.
Linux¶
Start OMEdit by either selecting the corresponding menu application item or typing “OMEdit” at the shell or command prompt.
Mac OS X¶
The default installation is /Application/MacPorts/OMEdit.app.
MainWindow & Browsers¶
The MainWindow contains several dockable browsers,
Libraries Browser
Documentation Browser
Variables Browser
Messages Browser
Figure 6 shows the MainWindow and browsers.
Figure 6 OMEdit MainWindow and Browsers.¶
The default location of the browsers are shown in Figure 6. All browsers except for Message Browser can be docked into left or right column. The Messages Browser can be docked into top or bottom areas. If you want OMEdit to remember the new docked position of the browsers then you must enable Preserve User's GUI Customizations option, see section General.
Filter Classes¶
To filter a class click Edit > Filter Classes or press keyboard shortcut Ctrl+Shift+F. The loaded Modelica classes can be filtered by typing any part of the class name.
Libraries Browser¶
To view the Libraries Browser click View > Windows > Libraries Browser. Shows the list of loaded Modelica classes. Each item of the Libraries Browser has right click menu for easy manipulation and usage of the class. The classes are shown in a tree structure with name and icon. The protected classes are not shown by default. If you want to see the protected classes then you must enable the Show Protected Classes option, see section General.
Figure 7 Libraries Browser.¶
Documentation Browser¶
Displays the HTML documentation of Modelica classes. It contains the navigation buttons for moving forward and backward. It also contains a WYSIWYG editor which allows writing class documentation in HTML format. To see documentation of any class, right click the Modelica class in Libraries Browser and choose View Documentation.
Figure 8 Documentation Browser.¶
Variables Browser¶
The class variables are structured in the form of the tree and are displayed in the Variables Browser. Each variable has a checkbox. Ticking the checkbox will plot the variable values. There is a find box on the top for filtering the variable in the tree. The filtering can be done using Regular Expression, Wildcard and Fixed String. The complete Variables Browser can be collapsed and expanded using the Collapse All and Expand All buttons.
The browser allows manipulation of changeable parameters for Re-simulating a Model. It also displays the unit and description of the variable.
The browser also contains the slider and animation buttons. These controls are used for variable graphics and schematic animation of models i.e., DynamicSelect annotation. They are also used for debugging of state machines. Open the Diagram Window for animation. It is only possible to animate one model at a time. This is achieved by marking the result file active in the Variables Browser. The animation only read the values from the active result file. It is possible to simulate several models. In that case, the user will see a list of result files in the Variables Browser. The user can switch between different result files by right clicking on the result file and selecting Set Active in the context menu.
Figure 9 Variables Browser.¶
Perspectives¶
The perspective tabs are loacted at the bottom right of the MainWindow:
Welcome Perspective
Modeling Perspective
Plotting Perspective
Debugging Perspective
Welcome Perspective¶
Figure 10 OMEdit Welcome Perspective.¶
The Welcome Perspective shows the list of recent files and the list of latest news from https://www.openmodelica.org/. See Figure 10. The orientation of recent files and latest news can be horizontal or vertical. User is allowed to show/hide the latest news. See section General.
Modeling Perspective¶
The Modeling Perpective provides the interface where user can create and design their models. See Figure 11.
Figure 11 OMEdit Modeling Perspective.¶
The Modeling Perspective interface can be viewed in two different modes, the tabbed view and subwindow view, see section General.
Plotting Perspective¶
The Plotting Perspective shows the simulation results of the models. Plotting Perspective will automatically become active when the simulation of the model is finished successfully. It will also become active when user opens any of the OpenModelica’s supported result file. Similar to Modeling Perspective this perspective can also be viewed in two different modes, the tabbed view and subwindow view, see section General.
Figure 12 OMEdit Plotting Perspective.¶
Modeling a Model¶
Creating a New Modelica Class¶
Creating a new Modelica class in OMEdit is rather straightforward. Choose any of the following methods,
Select File > New Modelica Class from the menu.
Click on New Modelica Class toolbar button.
Click on the Create New Modelica Class button available at the left bottom of Welcome Perspective.
Press Ctrl+N.
Opening a Modelica File¶
Choose any of the following methods to open a Modelica file,
Select File > Open Model/Library File(s) from the menu.
Click on Open Model/Library File(s) toolbar button.
Click on the Open Model/Library File(s) button available at the right bottom of Welcome Perspective.
Press Ctrl+O.
(Note, for editing Modelica system files like MSL (not recommended), see Editing Modelica Standard Library)
Opening a Modelica File with Encoding¶
Select File > Open/Convert Modelica File(s) With Encoding from the menu. It is also possible to convert files to UTF-8.
Model Widget¶
For each Modelica class one Model Widget is created. It has a statusbar and a view area. The statusbar contains buttons for navigation between the views and labels for information. The view area is used to display the icon, diagram and text layers of Modelica class. See Figure 14.
Figure 14 Model Widget showing the Diagram View.¶
Adding Component Models¶
Drag the models from the Libraries Browser and drop them on either Diagram or Icon View of Model Widget.
Making Connections¶
In order to connect one component model to another the user first needs
to enable the connect mode (
) from the toolbar.
Move the mouse over the connector. The mouse cursor will change from arrow cursor to cross cursor. To start the connection press left button and move while keeping the button pressed. Now release the left button. Move towards the end connector and click when cursor changes to cross cursor.
Simulating a Model¶
The simulation options for each model are stored inside the OMEdit data structure. They have the following sequence,
Each model has its own simulation options.
If the model is opened for the first time then the simulation options are set to default.
experimentand__OpenModelica_simulationFlagsannotations are applied if the model contains them.After that all the changes done via Simulation Setup window are preserved for the whole session. If you want to use the same settings in the future sessions then you should store them inside
experimentand__OpenModelica_simulationFlags.
The OMEdit Simulation Setup can be launched by,
Selecting Simulation > Simulation Setup from the menu. (requires a model to be active in ModelWidget)
Clicking on the Simulation Setup toolbar button. (requires a model to be active in ModelWidget)
Right clicking the model from the Libraries Browser and choosing Simulation Setup.
General Tab¶
Simulation Interval
Start Time – the simulation start time.
Stop Time – the simulation stop time.
Number of Intervals – the simulation number of intervals.
Interval – the length of one interval (i.e., stepsize)
Simulate with steps (makes the interactive simulation synchronous; plots nicer curves at the expense of performance)
Simulation server port
Integration
Method – the simulation solver. See section Integration Methods for solver details.
Tolerance – the simulation tolerance.
Jacobian - the jacobain method to use.
DASSL/IDA Options
Root Finding - Activates the internal root finding procedure of dassl.
Restart After Event - Activates the restart of dassl after an event is performed.
Initial Step Size
Maximum Step Size
Maximum Integration Order
C/C++ Compiler Flags (Optional) – the optional C/C++ compiler flags.
Number of Processors – the number of processors used to build the simulation.
Build Only – only builds the class.
Launch Transformational Debugger – launches the transformational debugger.
Launch Algorithmic Debugger – launches the algorithmic debugger.
Launch Animation – launches the 3d animation window.
Output Tab¶
Output Format – the simulation result file output format.
Single Precision - Output results in single precision (only for mat output format).
File Name Prefix (Optional) – the name is used as a prefix for the output files.
Result File (Optional) - the simulation result file name.
Variable Filter (Optional)
Protected Variables – adds the protected variables in result file.
Equidistant Time Grid – output the internal steps given by dassl instead of interpolating results into an equidistant time grid as given by stepSize or numberOfIntervals
Store Variables at Events – adds the variables at time events.
Show Generated File – displays the generated files in a dialog box.
Simulation Flags Tab¶
Model Setup File (Optional) – specifies a new setup XML file to the generated simulation code.
Initialization Method (Optional) – specifies the initialization method.
Equation System Initialization File (Optional) – specifies an external file for the initialization of the model.
Equation System Initialization Time (Optional) – specifies a time for the initialization of the model.
Clock (Optional) – the type of clock to use.
Linear Solver (Optional) – specifies the linear solver method.
Non Linear Solver (Optional) – specifies the nonlinear solver.
Linearization Time (Optional) – specifies a time where the linearization of the model should be performed.
Output Variables (Optional) – outputs the variables a, b and c at the end of the simulation to the standard output.
Profiling – creates a profiling HTML file.
CPU Time – dumps the cpu-time into the result file.
Enable All Warnings – outputs all warnings.
Logging (Optional)
stdout - standard output stream. This stream is always active, can be disabled with -lv=-stdout
assert - This stream is always active, can be disabled with -lv=-assert
LOG_DASSL - additional information about dassl solver.
LOG_DASSL_STATES - outputs the states at every dassl call.
LOG_DEBUG - additional debug information.
LOG_DSS - outputs information about dynamic state selection.
LOG_DSS_JAC - outputs jacobian of the dynamic state selection.
LOG_DT - additional information about dynamic tearing.
LOG_DT_CONS - additional information about dynamic tearing (local and global constraints).
LOG_EVENTS - additional information during event iteration.
LOG_EVENTS_V - verbose logging of event system.
LOG_INIT - additional information during initialization.
LOG_IPOPT - information from Ipopt.
LOG_IPOPT_FULL - more information from Ipopt.
LOG_IPOPT_JAC - check jacobian matrix with Ipopt.
LOG_IPOPT_HESSE - check hessian matrix with Ipopt.
LOG_IPOPT_ERROR - print max error in the optimization.
LOG_JAC - outputs the jacobian matrix used by dassl.
LOG_LS - logging for linear systems.
LOG_LS_V - verbose logging of linear systems.
LOG_NLS - logging for nonlinear systems.
LOG_NLS_V - verbose logging of nonlinear systems.
LOG_NLS_HOMOTOPY - logging of homotopy solver for nonlinear systems.
LOG_NLS_JAC - outputs the jacobian of nonlinear systems.
LOG_NLS_JAC_TEST - tests the analytical jacobian of nonlinear systems.
LOG_NLS_RES - outputs every evaluation of the residual function.
LOG_NLS_EXTRAPOLATE - outputs debug information about extrapolate process.
LOG_RES_INIT - outputs residuals of the initialization.
LOG_RT - additional information regarding real-time processes.
LOG_SIMULATION - additional information about simulation process.
LOG_SOLVER - additional information about solver process.
LOG_SOLVER_V - verbose information about the integration process.
LOG_SOLVER_CONTEXT - context information during the solver process.
LOG_SOTI - final solution of the initialization.
LOG_STATS - additional statistics about timer/events/solver.
LOG_STATS_V - additional statistics for LOG_STATS.
LOG_SUCCESS - This stream is always active, can be disabled with -lv=-LOG_SUCCESS.
LOG_UTIL.
LOG_ZEROCROSSINGS - additional information about the zerocrossings.
Additional Simulation Flags (Optional) – specify any other simulation flag.
Archived Simulations Tab¶
Shows the list of simulations already finished or running. Double clicking on any of them opens the simulation output window.
Plotting the Simulation Results¶
Successful simulation of model produces the result file which contains the instance variables that are candidate for plotting. Variables Browser will show the list of such instance variables. Each variable has a checkbox, checking it will plot the variable. See Figure 12.
Types of Plotting¶
The plotting type depends on the active Plot Window. By default the plotting type is Time Plot.
Time Plot¶
Plots the variable over the simulation time. You can have multiple Time
Plot windows by clicking on New Plot Window toolbar button (
).
Plot Parametric¶
Draws a two-dimensional parametric diagram, between variables x and y,
with y as a function of x. You can have multiple Plot Parametric
windows by clicking on the New Plot Parametric toolbar button (
).
Array Plot¶
Plots an array variable so that the array elements' indexes are on the x-axis and corresponding
elements' values are on the y-axis. The time is controlled by the slider above the variable tree.
When an array is present in the model, it has a principal array node in the variable tree.
To plot this array as an Array Plot, match the principal node. The principal node may be expanded
into particular array elements. To plot a single element in the Time Plot, match the element.
A new Array Plot window is opened using the New Array Plot Window toolbar button (
).
Array Parametric Plot¶
Plots the first array elements' values on the x-axis versus the second array elements' values on the y-axis. The time
is controlled by the slider above the variable tree. To create a new Array Parametric Plot, press
the New Array Parametric Plot Window toolbar button (
), then match the principle
array node in the variable tree view to be plotted on the x-axis and match the principle array node to be plotted
on the y-axis.
Diagram Window¶
Shows the active ModelWidget as a read only diagram. You can only have one
Diagram Window. To show it click on Diagram Window toolbar button (
).
Re-simulating a Model¶
The Variables Browser allows manipulation of changeable
parameters for re-simulation.
After changing the parameter values user can click on the re-simulate
toolbar button (
), or right click the model in Variables Browser and choose
re-simulate from the menu.
3D Visualization¶
Since OpenModelica 1.11 , OMEdit has built-in 3D visualization, which replaces third-party libraries (such as Modelica3D) for 3D visualization.
Running a Visualization¶
The 3d visualization is based on OpenSceneGraph. In order to run the visualization simply right click the class in Libraries Browser an choose “Simulate with Animation” as shown in Figure 15.
Figure 15 OMEdit Simulate with Animation.¶
One can also run the visualization via Simulation > Simulate with Animation from the menu.
When simulating a model in animation mode, the flag +d=visxml is set. Hence, the compiler will generate a scene description file _visual.xml which stores all information on the multibody shapes. This scene description references all variables which are needed for the animation of the multibody system. When simulating with +d=visxml, the compiler will always generate results for these variables.
Viewing a Visualization¶
After the successful simulation of the model, the visualization window will show up automatically as shown in Figure 16.
Figure 16 OMEdit 3D Visualization.¶
The animation starts with pushing the play button. The animation is played until stopTime or until the pause button is pushed. By pushing the previous button, the animation jumps to the initial point of time. Points of time can be selected by moving the time slider or by inserting a simulation time in the Time-box. The speed factor of animation in relation to realtime can be set in the Speed-dialog. Other animations can be openend by using the open file button and selecting a result file with a corresping scene description file.
The 3D camera view can be manipulated as follows:
Operation |
Key |
Mouse Action |
|---|---|---|
Move Closer/Further |
none |
Wheel |
Move Closer/Further |
Right Mouse Hold |
Up/Down |
Move Up/Down/Left/Right |
Middle Mouse Hold |
Move Mouse |
Move Up/Down/Left/Right |
Left and Right Mouse Hold |
Move Mouse |
Rotate |
Left Mouse Hold |
Move Mouse |
Shape context menu |
Right Mouse + Shift |
Predefined views (Isometric, Side, Front, Top) can be selected and the scene can be tilted by 90° either clock or anticlockwise with the rotation buttons.
Additional Visualization Features¶
The shapes that are displayed in the viewer can be selected with shift + right click. If a shape is selected, a context menu pops up that offers additional visualization features
The following features can be selected:
Menu |
Description |
|---|---|
Change Transparency |
The shape becomes either transparent or intransparent. |
Make Shape Invisible |
The shape becomes invisible. |
Change Color |
A color dialog pops up and the color of the shape can be set. |
Apply Check Texture |
A checked texture is applied to the shape. |
Apply Custom Texture |
A file selection dialog pops up and an image file can be selected as a texture. |
Remove Texture |
Removes the current texture of the shape. |
Animation of Realtime FMUs¶
Instead of a result file, OMEdit can load Functional Mock-up Units to retrieve the data for the animation of multibody systems. Just like opening a mat-file from the animation-plotting view, one can open an FMU-file. Necessarily, the FMU has to be generated with the +d=visxml flag activated, so that a scene description file is generated in the same directory as the FMU. Currently, only FMU 1.0 and FMU 2.0 model exchange are supported. When choosing an FMU, the simulation settings window pops up to choose solver and step size. Afterwards, the model initializes and can be simulated by pressing the play button.
Interactive Realtime Animation of FMUs¶
FMUs can be simulated with realtime user interaction. A possible solution is to equip the model with an interaction model from the Modelica_DeviceDrivers library (https://github.com/modelica/Modelica_DeviceDrivers). The realtime synchronization is done by OMEdit so no additional time synchronization model is necessary.
Interactive Simulation¶
Warning
Interactive simulation is an experimental feature.
Interactive simulation is enabled by selecting interactive simulation in the General tab of the simulation setup.
There are two main modes of execution: asynchronous and synchronous (simulate with steps). The difference is that in synchronous (step mode), OMEdit sends a command to the simulation for each step that the simulation should take. The asynchronous mode simply tells the simulation to run and samples variables values in real-time; if the simulation runs very fast, fewer values will be sampled.
When running in asynchronous mode, it is possible to simulate the model in real-time (with a scaling factor just like simulation flag -rt, but with the ability to change the scaling factor during the interactive simulation). In the synchronous mode, the speed of the simulation does not directly correspond to real-time.
How to Create User Defined Shapes – Icons¶
Users can create shapes of their own by using the shape creation tools available in OMEdit.
Line Tool – Draws a line. A line is created with a minimum of two points. In order to create a line, the user first selects the line tool from the toolbar and then click on the Icon/Diagram View; this will start creating a line. If a user clicks again on the Icon/Diagram View a new line point is created. In order to finish the line creation, user has to double click on the Icon/Diagram View.
Polygon Tool – Draws a polygon. A polygon is created in a similar fashion as a line is created. The only difference between a line and a polygon is that, if a polygon contains two points it will look like a line and if a polygon contains more than two points it will become a closed polygon shape.
Rectangle Tool – Draws a rectangle. The rectangle only contains two points where first point indicates the starting point and the second point indicates the ending the point. In order to create rectangle, the user has to select the rectangle tool from the toolbar and then click on the Icon/Diagram View, this click will become the first point of rectangle. In order to finish the rectangle creation, the user has to click again on the Icon/Diagram View where he/she wants to finish the rectangle. The second click will become the second point of rectangle.
Ellipse Tool – Draws an ellipse. The ellipse is created in a similar way as a rectangle is created.
Text Tool – Draws a text label.
Bitmap Tool – Draws a bitmap container.
The shape tools are located in the toolbar. See Figure 20.
Figure 20 User defined shapes.¶
The user can select any of the shape tools and start drawing on the Icon/Diagram View. The shapes created on the Diagram View of Model Widget are part of the diagram and the shapes created on the Icon View will become the icon representation of the model.
For example, if a user creates a model with name testModel and add a rectangle using the rectangle tool and a polygon using the polygon tool, in the Icon View of the model. The model’s Modelica Text will appear as follows:
model testModel
annotation(Icon(graphics = {Rectangle(rotation = 0, lineColor = {0,0,255}, fillColor = {0,0,255}, pattern = LinePattern.Solid, fillPattern = FillPattern.None, lineThickness = 0.25, extent = {{ -64.5,88},{63, -22.5}}),Polygon(points = {{ -47.5, -29.5},{52.5, -29.5},{4.5, -86},{ -47.5, -29.5}}, rotation = 0, lineColor = {0,0,255}, fillColor = {0,0,255}, pattern = LinePattern.Solid, fillPattern = FillPattern.None, lineThickness = 0.25)}));
end testModel;
In the above code snippet of testModel, the rectangle and a polygon are added to the icon annotation of the model. Similarly, any user defined shape drawn on a Diagram View of the model will be added to the diagram annotation of the model.
Global head section in documentation¶
If you want to use same styles or same JavaScript for the classes contained inside a package then
you can define __OpenModelica_infoHeader annotation inside the Documentation annotation of a package.
For example,
package P
model M
annotation(Documentation(info="<html>
<a href=\"javascript:HelloWorld()\">Click here</a>
</html>"));
end M;
annotation(Documentation(__OpenModelica_infoHeader="
<script type=\"text/javascript\">
function HelloWorld() {
alert(\"Hello World!\");
}
</script>"));
end P;
In the above example model M does not need to define the javascript function HelloWorld.
It is only defined once at the package level using the __OpenModelica_infoHeader and then all classes
contained in the package can use it.
In addition styles and JavaScript can be added from file locations using Modelica URIs. Example:
package P
model M
annotation(Documentation(info="<html>
<a href=\"javascript:HelloWorld()\">Click here</a>
</html>"));
end M;
annotation(Documentation(__OpenModelica_infoHeader="
<script type=\"text/javascript\">
src=\"modelica://P/Resources/hello.js\">
}
</script>"));
end P;
Where the file Resources/hello.js then contains:
function HelloWorld() {
alert("Hello World!");
}
Options¶
OMEdit allows users to save several options which will be remembered across different sessions of OMEdit. The Options Dialog can be used for reading and writing the options.
General¶
General
Language – Sets the application language.
Working Directory – Sets the application working directory. All files are generated in this directory.
Toolbar Icon Size – Sets the size for toolbar icons.
Preserve User’s GUI Customizations – If true then OMEdit will remember its windows and toolbars positions and sizes.
Terminal Command – Sets the terminal command. When user clicks on Tools > Open Terminal then this command is executed.
Terminal Command Arguments – Sets the terminal command arguments.
Hide Variables Browser – Hides the variable browser when switching away from plotting perspective.
Activate Access Annotations – Activates the access annotations for the non-encrypted libraries. Access annotations are always active for encrypted libraries.
Libraries Browser
Library Icon Size – Sets the size for library icons.
Show Protected Classes – If enabled then Libraries Browser will also list the protected classes.
Modeling View Mode
Tabbed View/SubWindow View – Sets the view mode for modeling.
Default View
Icon View/DiagramView/Modelica Text View/Documentation View – If no preferredView annotation is defined then this setting is used to show the respective view when user double clicks on the class in the Libraries Browser.
Enable Auto Save
Auto Save interval – Sets the auto save interval value. The minimum possible interval value is 60 seconds.
Enable Auto Save for single classes – Enables the auto save for one class saved in one file.
Enable Auto Save for one file packages – Enables the auto save for packages saved in one file.
Welcome Page
Horizontal View/Vertical View – Sets the view mode for welcome page.
Show Latest News – if true then displays the latest news.
Libraries¶
System Libraries – The list of system libraries that should be loaded every time OMEdit starts.
Force loading of Modelica Standard Library – If true then Modelica and ModelicaReference will always load even if user has removed them from the list of system libraries.
Load OpenModelica library on startup – If true then OpenModelica package will be loaded when OMEdit is started.
User Libraries – The list of user libraries/files that should be loaded every time OMEdit starts.
Text Editor¶
Format
Line Ending - Sets the file line ending.
Byte Order Mark (BOM) - Sets the file BOM.
Tabs and Indentation
Tab Policy – Sets the tab policy to either spaces or tabs only.
Tab Size – Sets the tab size.
Indent Size – Sets the indent size.
Syntax Highlight and Text Wrapping
Enable Syntax Highlighting – Enable/Disable the syntax highlighting.
Enable Code Folding - Enable/Disable the code folding. When code folding is enabled multi-line annotations are collapsed into a compact icon (a rectangle containing "...)"). A marker containing a "+" sign becomes available at the left-side of the involved line, allowing the code to be expanded/re-collapsed at will.
Match Parentheses within Comments and Quotes – Enable/Disable the matching of parentheses within comments and quotes.
Enable Line Wrapping – Enable/Disable the line wrapping.
Autocomplete
Enable Autocomplete – Enable/Disable the autocomplete.
Font
Font Family – Shows the names list of available fonts. Sets the font for the editor.
Font Size – Sets the font size for the editor.
Modelica Editor¶
Preserve Text Indentation – If true then uses diffModelicaFileListings API call otherwise uses the OMC pretty-printing.
Colors
Items – List of categories used of syntax highlighting the code.
Item Color – Sets the color for the selected item.
Preview – Shows the demo of the syntax highlighting.
MetaModelica Editor¶
Colors
Items – List of categories used of syntax highlighting the code.
Item Color – Sets the color for the selected item.
Preview – Shows the demo of the syntax highlighting.
CompositeModel Editor¶
Colors
Items – List of categories used of syntax highlighting the code.
Item Color – Sets the color for the selected item.
Preview – Shows the demo of the syntax highlighting.
C/C++ Editor¶
Colors
Items – List of categories used of syntax highlighting the code.
Item Color – Sets the color for the selected item.
Preview – Shows the demo of the syntax highlighting.
Graphical Views¶
Extent
Left – Defines the left extent point for the view.
Bottom – Defines the bottom extent point for the view.
Right – Defines the right extent point for the view.
Top – Defines the top extent point for the view.
Grid
Horizontal – Defines the horizontal size of the view grid.
Vertical – Defines the vertical size of the view grid.
Component
Scale factor – Defines the initial scale factor for the component dragged on the view.
Preserve aspect ratio – If true then the component’s aspect ratio is preserved while scaling.
Simulation¶
Simulation
Translation Flags
Matching Algorithm – sets the matching algorithm for simulation.
Index Reduction Method – sets the index reduction method for simulation.
Show additional information from the initialization process - prints the information from the initialization process
Evaluate all parameters (faster simulation, cannot change them at runtime) - makes the simulation more efficient but you have to recompile the model if you want to change the parameter instead of re-simulate.
Enable analytical jacobian for non-linear strong components - enables analytical jacobian for non-linear strong components without user-defined function calls.
Enable pedantic debug-mode, to get much more feedback
Enable parallelization of independent systems of equations (Experimental)
Enable experimental new instantiation phase
Additional Translation Flags – sets the translation flags see Options
Target Language – sets the target language in which the code is generated.
Target Build – sets the target build that is used to compile the generated code.
C Compiler – sets the C compiler for compiling the generated code.
CXX Compiler – sets the CXX compiler for compiling the generated code.
Ignore __OpenModelica_commandLineOptions annotation – if true then ignores the __OpenModelica_commandLineOptions annotation while running the simulation.
Ignore __OpenModelica_simulationFlags annotation – if true then ignores the __OpenModelica_simulationFlags annotation while running the simulation.
Save class before simulation – if true then always saves the class before running the simulation.
Switch to plotting perspective after simulation – if true then GUI always switches to plotting perspective after the simulation.
Close completed simulation output windows before simulation – if true then the completed simulation output windows are closed before starting a new simulation.
Delete intermediate compilation files – if true then the files generated during the compilation are deleted automatically.
Delete entire simulation directory of the model when OMEdit is closed – if true then the entire simulation directory is deleted on quit.
Output
Structured – Shows the simulation output in the form of tree structure.
Formatted Text – Shows the simulation output in the form of formatted text.
Messages¶
General
Output Size - Specifies the maximum number of rows the Messages Browser may have. If there are more rows then the rows are removed from the beginning.
Reset messages number before simulation – Resets the messages counter before starting the simulation.
Font and Colors
Font Family – Sets the font for the messages.
Font Size – Sets the font size for the messages.
Notification Color – Sets the text color for notification messages.
Warning Color – Sets the text color for warning messages.
Error Color – Sets the text color for error messages.
Notifications¶
Notifications
Always quit without prompt – If true then OMEdit will quit without prompting the user.
Show item dropped on itself message – If true then a message will pop-up when a class is dragged and dropped on itself.
Show model is defined as partial and component will be added as replaceable message – If true then a message will pop-up when a partial class is added to another class.
Show component is declared as inner message – If true then a message will pop-up when an inner component is added to another class.
Show save model for bitmap insertion message – If true then a message will pop-up when user tries to insert a bitmap from a local directory to an unsaved class.
Always ask for the dragged component name – If true then a message will pop-up when user drag & drop the component on the graphical view.
Always ask for what to do with the text editor error – If true then a message will always pop-up when there is an error in the text editor.
Line Style¶
Line Style
Color – Sets the line color.
Pattern – Sets the line pattern.
Thickness – Sets the line thickness.
Start Arrow – Sets the line start arrow.
End Arrow – Sets the line end arrow.
Arrow Size – Sets the start and end arrow size.
Smooth – If true then the line is drawn as a Bezier curve.
Plotting¶
General
Auto Scale – sets whether to auto scale the plots or not.
Plotting View Mode
Tabbed View/SubWindow View – Sets the view mode for plotting.
Curve Style
Pattern – Sets the curve pattern.
Thickness – Sets the curve thickness.
Variable filter
Filter Interval - Delay in filtering the variables. Set the value to 0 if you don't want any delay.
Figaro¶
Figaro
Figaro Library – the Figaro library file path.
Tree generation options – the Figaro tree generation options file path.
Figaro Processor – the Figaro processor location.
Debugger¶
Algorithmic Debugger
GDB Path – the gnu debugger path
GDB Command Timeout – timeout for gdb commands.
GDB Output Limit – limits the GDB output to N characters.
Display C frames – if true then shows the C stack frames.
Display unknown frames – if true then shows the unknown stack frames. Unknown stack frames means frames whose file path is unknown.
Clear old output on a new run – if true then clears the output window on new run.
Clear old log on new run – if true then clears the log window on new run.
Transformational Debugger
Always show Transformational Debugger after compilation – if true then always open the Transformational Debugger window after model compilation.
Generate operations in the info xml – if true then adds the operations information in the info xml file.
FMI¶
Export
Version
1.0 – Sets the FMI export version to 1.0
2.0 – Sets the FMI export version to 2.0
Type
Model Exchange – Sets the FMI export type to Model Exchange.
Co-Simulation – Sets the FMI export type to Co-Simulation.
Model Exchange and Co-Simulation – Sets the FMI export type to Model Exchange and Co-Simulation.
FMU Name – Sets a prefix for generated FMU file.
Platforms - list of platforms to generate FMU binaries.
Import
Delete FMU directory and generated model when OMEdit is closed - If true then the temporary FMU directory that is created for importing the FMU will be deleted.
OMTLMSimulator¶
General
Path - path to OMTLMSimulator bin directory.
Manager Process - path to OMTLMSimulator managar process.
Monitor Process - path to OMTLMSimulator monitor process.
OMSimulator¶
General
Working Directory - working directory for OMSimulator files.
Logging Level - OMSimulator logging level.
__OpenModelica_commandLineOptions Annotation¶
OpenModelica specific annotation to define the command line options needed to simulate the model. For example if you always want to simulate the model with a specific matching algorithm and index reduction method instead of the default ones then you can write the following code,
model Test
annotation(__OpenModelica_commandLineOptions = "--matchingAlgorithm=BFSB --indexReductionMethod=dynamicStateSelection");
end Test;
The annotation is a space separated list of options where each option is either just a command line flag or a flag with a value.
In OMEdit open the Simulation Setup and set the Translation Flags then in the bottom check Save translation flags inside model i.e., __OpenModelica_commandLineOptions annotation and click on OK.
If you want to ignore this annotation then use setCommandLineOptions("--ignoreCommandLineOptionsAnnotation=true"). In OMEdit Tools > Options > Simulation check Ignore __OpenModelica_commandLineOptions annotation.
__OpenModelica_simulationFlags Annotation¶
OpenModelica specific annotation to define the simulation options needed to simulate the model. For example if you always want to simulate the model with a specific solver instead of the default DASSL and would also like to see the cpu time then you can write the following code,
model Test
annotation(__OpenModelica_simulationFlags(s = "heun", cpu = "()"));
end Test;
The annotation is a comma separated list of options where each option is a simulation flag with a value. For flags that doesn't have any value use () (See the above code example).
In OMEdit open the Simulation Setup and set the Simulation Flags then in the bottom check Save simulation flags inside model i.e., __OpenModelica_simulationFlags annotation and click on OK.
If you want to ignore this annotation then use setCommandLineOptions("--ignoreSimulationFlagsAnnotation=true"). In OMEdit Tools > Options > Simulation check Ignore __OpenModelica_simulationFlags annotation.
Editing Modelica Standard Library¶
By default OMEdit loads the Modelica Standard Library (MSL) as a system library. System libraries are read-only. If you want to edit MSL you need to load it as user library instead of system library. We don't recommend editing MSL but if you really need to and understand the consequences then follow these steps,
Go to Tools > Options > Libraries.
Remove Modelica & ModelicaReference from list of system libraries.
Uncheck force loading of Modelica Standard Library.
Add $OPENMODELICAHOME/lib/omlibrary/Modelica X.X/package.mo under user libraries.
Restart OMEdit.
State Machines¶
Creating a New Modelica State Class¶
Follow the same steps as defined in Creating a New Modelica Class. Additionally make sure you check the State checkbox.
Figure 21 Creating a new Modelica state.¶
Making Transitions¶
In order to make a transition from one state to another the user first needs
to enable the transition mode (
) from the toolbar.
Move the mouse over the state. The mouse cursor will change from arrow cursor to cross cursor. To start the transition press left button and move while keeping the button pressed. Now release the left button. Move towards the end state and click when cursor changes to cross cursor.
A Create Transition dialog box will appear which allows you to set the transition attributes. Cancelling the dialog will cancel the transition.
Double click the transition or right click and choose Edit Transition to modify the transition attributes.
State Machine Simulation¶
Support for Modelica state machines was added in the Modelica Language Specification v3.3. A subtle problem can occur if Modelica v3.2 libraries are loaded, e.g., the Modelica Standard Library v3.2.2, because in this case OMC automatically switches into Modelica v3.2 compatibility mode. Trying to simulate a state machine in Modelica v3.2 compatibility mode results in an error. It is possible to use the OMC flag --std=latest in order to ensure (at least) Modelica v3.3 support. In OMEdit this can be achieved by setting that flag in the Tools > Options > Simulation dialog.
Figure 22 Ensure (at least) Modelica v3.3 support.¶
Using OMEdit as Text Editor¶
OMEdit can be be used as a Text editor. Currently support for editing MetaModelica,Modelica and C/C++ are available with syntax highlighting and autocompletion of keywords and types. Additionaly the Modelica and MetaModelica files are provided with autocompletion of code-snippets along with keywords and types. The users can load the directory from file menu File > Open Directory. which opens the Directory structure in the Libraries-browser.
Figure 23 open-directory¶
After the directory is opened in the Libraries-browser, the users can expand the directory structure and click the file which opens in the texteditor.
Figure 24 openfile in texteditor¶
Advanced Search¶
Support to search in OMEdit texteditor is available. The search browser can be enabled by selecting View > Windows > Search browser or through shortcut keys (ctrl+h).
Figure 25 Enable omedit search browser¶
The users can start the search by loading the directory they want to search and fill in the text to be searched for and file pattern if needed and click the search button.
Figure 26 Start search in search browser¶
After the search is completed the results are presented to the users in a separate window, The search results contains the following
The name of the files where the searched word is matched
The line number and text of the matched word.
The users can click the line number or the matched text and it will automatically open the file in the texteditor and move the cursor to matched line number of the text.
Figure 27 Search Results¶
The users can perform multiple searches and go back to old search results using search histroy option.
Figure 28 Search History¶
