Hudson logo

Failed

simulation_modelica_parameters.parameterTest6.mos (from (result.xml))

Failing for the past 3,185 builds (Since #8079 )

Stacktrace

Output mismatch (see stdout for details)

Standard Output

 + parameterTest6                                                                    ... equation mismatch [time: 15]

==== Log /tmp/omc-rtest-adrpo33/simulation/modelica/parameters/parameterTest6.mos_temp2796/log-parameterTest6.mos
true
""
true

BEGINNING of preOptModule 'evaluateParameters'
********************************************************************************


########################################
DAE before evaluating parameters
########################################


unknown partition
========================================

Variables (3)
========================================
1: z:DISCRETE()  type: Integer 
2: y:DISCRETE()  type: Integer 
3: x:DISCRETE()  type: Integer 


Equations (3, 3)
========================================
1/1 (1): x = if b2 then e1 - p3 else f1 - p3   [dynamic |0|0|0|0|]
2/2 (1): y = f1 + p1 + p2 + p4 + p5 + f2   [dynamic |0|0|0|0|]
3/3 (1): z = a[1] + a[2] + a[3] + s   [dynamic |0|0|0|0|]


no matching



BackendDAEType: simulation


Known variables only depending on parameters and constants - globalKnownVars (15)
========================================
1: pr1:PARAM(protected = true )  = 100  type: Integer 
2: a[3]:PARAM()  = 1  type: Integer  [3]
3: a[2]:PARAM()  = 1  type: Integer  [3]
4: a[1]:PARAM()  = 1  type: Integer  [3]
5: s:PARAM(final = true )  = 3  type: Integer 
6: e1:PARAM()  = if b1 then p3 + p1 else 7 + p2  type: Integer 
7: b2:PARAM()  = true  type: Boolean 
8: b1:PARAM()  = false  type: Boolean 
9: f2:PARAM(final = true )  = 10  type: Integer 
10: f1:PARAM(final = true )  = p1  type: Integer 
11: p5:PARAM()  = pr1  type: Integer 
12: p4:PARAM()  = f1 + p1  type: Integer 
13: p3:PARAM()  = 5  type: Integer 
14: p2:PARAM()  = if b1 then e1 + p4 else if b2 then p1 - p3 else e1 - p3  type: Integer 
15: p1:PARAM()  = 2  type: Integer 



Structural parameters and parameters with annotation(Evaluate=true) will be evaluated.

START evaluating parameters:
================================================================================
Number of parameters: 15
Number of parameters selected for evaluation: 7
Selected parameters for evaluation:
8,7,6,5,4,3,2

Incidence Matrix (row: equation)
========================================
number of rows: 15
1:
2:
3:
4:
5:
6: 15 14 13 8
7:
8:
9:
10: 15
11: 1
12: 15 10
13:
14: 15 13 12 8 7 6
15:

Transposed Incidence Matrix (row: variable)
========================================
number of rows: 15
1: 11 1
2: 2
3: 3
4: 4
5: 5
6: 14 6
7: 14 7
8: 14 8 6
9: 9
10: 12 10
11: 11
12: 14 12
13: 14 13 6
14: 14 6
15: 15 14 12 10 6


After evaluating the selected parameters:
================================================================================

All replacements:
Replacements: (12)
========================================
b1 -> false
b2 -> true
p1 -> 2
p3 -> 5
f1 -> 2
p4 -> 4
p2 -> -3
e1 -> 4
s -> 3
a[1] -> 1
a[2] -> 1
a[3] -> 1

Replacements that will be replaced in the DAE:
Replacements: (12)
========================================
b1 -> false
b2 -> true
p1 -> 2
p3 -> 5
f1 -> 2
p4 -> 4
p2 -> -3
e1 -> 4
s -> 3
a[1] -> 1
a[2] -> 1
a[3] -> 1

globalKnownVars (15)
========================================
1: pr1:PARAM(protected = true )  = 100  type: Integer 
2: a[3]:PARAM(final = true )  = 1  type: Integer  [3]
3: a[2]:PARAM(final = true )  = 1  type: Integer  [3]
4: a[1]:PARAM(final = true )  = 1  type: Integer  [3]
5: s:PARAM(final = true )  = 3  type: Integer 
6: e1:PARAM(final = true )  = 4  type: Integer 
7: b2:PARAM(final = true )  = true  type: Boolean 
8: b1:PARAM(final = true )  = false  type: Boolean 
9: f2:PARAM(final = true )  = 10  type: Integer 
10: f1:PARAM(final = true )  = p1  type: Integer 
11: p5:PARAM()  = pr1  type: Integer 
12: p4:PARAM(final = true )  = f1 + p1  type: Integer 
13: p3:PARAM(final = true )  = 5  type: Integer 
14: p2:PARAM(final = true )  = if b1 then e1 + p4 else if b2 then p1 - p3 else e1 - p3  type: Integer 
15: p1:PARAM(final = true )  = 2  type: Integer 


mark: 1
markarr: -1,1,1,1,1,1,1,1,-1,1,-1,1,1,1,1


After sorting parameters:
================================================================================
Order:
15
13
10
12
9
8
7
14,6
5
4
3
2
1
11


After replacing the evaluated parameters in parameter bindings:
================================================================================
All replacements:
Replacements: (13)
========================================
b1 -> false
b2 -> true
p1 -> 2
p3 -> 5
f1 -> 2
p4 -> 4
p2 -> -3
e1 -> 4
s -> 3
a[1] -> 1
a[2] -> 1
a[3] -> 1
f2 -> 10

Replacements that will be replaced in the DAE:
Replacements: (13)
========================================
b1 -> false
b2 -> true
p1 -> 2
p3 -> 5
f1 -> 2
p4 -> 4
p2 -> -3
e1 -> 4
s -> 3
a[1] -> 1
a[2] -> 1
a[3] -> 1
f2 -> 10

globalKnownVars (15)
========================================
1: pr1:PARAM(protected = true )  = 100  type: Integer 
2: a[3]:PARAM(final = true )  = 1  type: Integer  [3]
3: a[2]:PARAM(final = true )  = 1  type: Integer  [3]
4: a[1]:PARAM(final = true )  = 1  type: Integer  [3]
5: s:PARAM(final = true )  = 3  type: Integer 
6: e1:PARAM(final = true )  = 4  type: Integer 
7: b2:PARAM(final = true )  = true  type: Boolean 
8: b1:PARAM(final = true )  = false  type: Boolean 
9: f2:PARAM(final = true )  = 10  type: Integer 
10: f1:PARAM(final = true )  = 2  type: Integer 
11: p5:PARAM()  = pr1  type: Integer 
12: p4:PARAM(final = true )  = 4  type: Integer 
13: p3:PARAM(final = true )  = 5  type: Integer 
14: p2:PARAM(final = true )  = -3  type: Integer 
15: p1:PARAM(final = true )  = 2  type: Integer 


mark: 1
markarr: -1,1,1,1,1,1,1,1,-1,1,-1,1,1,1,1


After replacing the evaluated parameters in variable bindings and start attributes:
================================================================================
All replacements:
Replacements: (13)
========================================
b1 -> false
b2 -> true
p1 -> 2
p3 -> 5
f1 -> 2
p4 -> 4
p2 -> -3
e1 -> 4
s -> 3
a[1] -> 1
a[2] -> 1
a[3] -> 1
f2 -> 10

Replacements that will be replaced in the DAE:
Replacements: (13)
========================================
b1 -> false
b2 -> true
p1 -> 2
p3 -> 5
f1 -> 2
p4 -> 4
p2 -> -3
e1 -> 4
s -> 3
a[1] -> 1
a[2] -> 1
a[3] -> 1
f2 -> 10

globalKnownVars (15)
========================================
1: pr1:PARAM(protected = true )  = 100  type: Integer 
2: a[3]:PARAM(final = true )  = 1  type: Integer  [3]
3: a[2]:PARAM(final = true )  = 1  type: Integer  [3]
4: a[1]:PARAM(final = true )  = 1  type: Integer  [3]
5: s:PARAM(final = true )  = 3  type: Integer 
6: e1:PARAM(final = true )  = 4  type: Integer 
7: b2:PARAM(final = true )  = true  type: Boolean 
8: b1:PARAM(final = true )  = false  type: Boolean 
9: f2:PARAM(final = true )  = 10  type: Integer 
10: f1:PARAM(final = true )  = 2  type: Integer 
11: p5:PARAM()  = pr1  type: Integer 
12: p4:PARAM(final = true )  = 4  type: Integer 
13: p3:PARAM(final = true )  = 5  type: Integer 
14: p2:PARAM(final = true )  = -3  type: Integer 
15: p1:PARAM(final = true )  = 2  type: Integer 


mark: 1
markarr: -1,1,1,1,1,1,1,1,-1,1,-1,1,1,1,1


########################################
DAE after replacing the evaluated parameters
########################################


unknown partition
========================================

Variables (3)
========================================
1: z:DISCRETE()  type: Integer 
2: y:DISCRETE()  type: Integer 
3: x:DISCRETE()  type: Integer 


Equations (3, 3)
========================================
1/1 (1): x = -1   [dynamic |0|0|0|0|]
2/2 (1): y = 15 + p5   [dynamic |0|0|0|0|]
3/3 (1): z = 6   [dynamic |0|0|0|0|]


no matching



BackendDAEType: simulation


Known variables only depending on parameters and constants - globalKnownVars (15)
========================================
1: pr1:PARAM(protected = true )  = 100  type: Integer 
2: a[3]:PARAM(final = true )  = 1  type: Integer  [3]
3: a[2]:PARAM(final = true )  = 1  type: Integer  [3]
4: a[1]:PARAM(final = true )  = 1  type: Integer  [3]
5: s:PARAM(final = true )  = 3  type: Integer 
6: e1:PARAM(final = true )  = 4  type: Integer 
7: b2:PARAM(final = true )  = true  type: Boolean 
8: b1:PARAM(final = true )  = false  type: Boolean 
9: f2:PARAM(final = true )  = 10  type: Integer 
10: f1:PARAM(final = true )  = 2  type: Integer 
11: p5:PARAM()  = pr1  type: Integer 
12: p4:PARAM(final = true )  = 4  type: Integer 
13: p3:PARAM(final = true )  = 5  type: Integer 
14: p2:PARAM(final = true )  = -3  type: Integer 
15: p1:PARAM(final = true )  = 2  type: Integer 



END of preOptModule 'evaluateParameters'
********************************************************************************

record SimulationResult
    resultFile = "parameterTest6_res.mat",
    simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-006, method = 'dassl', fileNamePrefix = 'parameterTest6', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = '-output=p1,p2,p3,p4,p5,f1,f2,b1,b2,e1,s,a[1],a[2],a[3],pr1,x,y,z'",
    messages = "LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
time=1,p1=2,p2=-3,p3=5,p4=4,p5=100,f1=2,f2=10,b1=0,b2=1,e1=4,s=3,a[1]=1,a[2]=1,a[3]=1,pr1=100,x=-1,y=115,z=6
LOG_SUCCESS       | info    | The simulation finished successfully.
"
end SimulationResult;
""
1
""

Equation mismatch: diff says:
--- /tmp/omc-rtest-adrpo33/simulation/modelica/parameters/parameterTest6.mos_temp2796/equations-expected2019-05-07 13:41:22.950091800 +0200
+++ /tmp/omc-rtest-adrpo33/simulation/modelica/parameters/parameterTest6.mos_temp2796/equations-got2019-05-07 13:41:37.493111700 +0200
@@ -350,21 +350,14 @@
 END of preOptModule 'evaluateParameters'
 ********************************************************************************
 
 record SimulationResult
 resultFile = "parameterTest6_res.mat",
-simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'parameterTest6', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = '-output=p1,p2,p3,p4,p5,f1,f2,b1,b2,e1,s,a[1],a[2],a[3],pr1,x,y,z'",
+simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-006, method = 'dassl', fileNamePrefix = 'parameterTest6', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = '-output=p1,p2,p3,p4,p5,f1,f2,b1,b2,e1,s,a[1],a[2],a[3],pr1,x,y,z'",
 messages = "LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
 time=1,p1=2,p2=-3,p3=5,p4=4,p5=100,f1=2,f2=10,b1=0,b2=1,e1=4,s=3,a[1]=1,a[2]=1,a[3]=1,pr1=100,x=-1,y=115,z=6
 LOG_SUCCESS       | info    | The simulation finished successfully.
 "
 end SimulationResult;
 ""
-stdout            | warning | It is not possible to override the following quantity: f2
-|                 | |       | It seems to be structural, final, protected or evaluated or has a non-constant binding.
-stdout            | warning | It is not possible to override the following quantity: s
-|                 | |       | It seems to be structural, final, protected or evaluated or has a non-constant binding.
-LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
-time=1,p1=2,p2=-3,p3=5,p4=4,p5=100,f1=2,f2=10,b1=0,b2=1,e1=4,s=3,a[1]=1,a[2]=1,a[3]=1,pr1=100,x=-1,y=115,z=6
-LOG_SUCCESS       | info    | The simulation finished successfully.
-0
+1
 ""

Equation mismatch: omc-diff says:
Line 362: Lexical token differs:
expected: stdout            | warning | It is not possible to override the following quantity: f
got:      1

== 1 out of 1 tests failed [simulation/modelica/parameters/parameterTest6.mos_temp2796, time: 16]

Powered by Hudson Open Source Continuous Integration Server from the Eclipse Foundation