Hudson logo

Failed

simulation_modelica_parameters.parameterTest15.mos (from (result.xml))

Failing for the past 3,117 builds (Since #8147 )

Stacktrace

Output mismatch (see stdout for details)

Standard Output

 + parameterTest15                                                                   ... equation mismatch [time: 15]

==== Log /tmp/omc-rtest-adrpo33/simulation/modelica/parameters/parameterTest15.mos_temp8626/log-parameterTest15.mos
true
""
true

BEGINNING of preOptModule 'evaluateParameters'
********************************************************************************


########################################
DAE before evaluating parameters
########################################


unknown partition
========================================

no matching



BackendDAEType: simulation


Known variables only depending on parameters and constants - globalKnownVars (12)
========================================
1: pr2:PARAM(protected = true )  = pr1  type: Integer 
2: pr1:PARAM(protected = true )  = 5  type: Integer 
3: p8:PARAM(start = 2 * p3 )  type: Integer 
4: p7:PARAM(start = 1 final = true )  type: Integer 
5: p6:PARAM(final = true )  = p5  type: Integer 
6: p5:PARAM(final = true )  = 1  type: Integer 
7: p4:PARAM(fixed = false )  type: Integer 
8: p3:PARAM()  = 5  type: Integer 
9: c2:CONST()  = 5  type: Integer 
10: c1:CONST()  = 5  type: Integer 
11: p2:PARAM()  = p1  type: Integer 
12: p1:PARAM()  = 1  type: Integer 



Structural parameters and parameters with annotation(Evaluate=true) will be evaluated.

START evaluating parameters:
================================================================================
Number of parameters: 12
Number of parameters selected for evaluation: 0
Selected parameters for evaluation:


Incidence Matrix (row: equation)
========================================
number of rows: 12
1: 2
2:
3: 8
4:
5: 6
6:
7:
8:
9:
10:
11: 12
12:

Transposed Incidence Matrix (row: variable)
========================================
number of rows: 12
1: 1
2: 2 1
3: 3
4: 4
5: 5
6: 6 5
7: 7
8: 8 3
9: 9
10: 10
11: 11
12: 12 11


After evaluating the selected parameters:
================================================================================

All replacements:
Replacements: (0)
========================================


Replacements that will be replaced in the DAE:
Replacements: (0)
========================================


globalKnownVars (12)
========================================
1: pr2:PARAM(protected = true )  = pr1  type: Integer 
2: pr1:PARAM(protected = true )  = 5  type: Integer 
3: p8:PARAM(start = 2 * p3 )  type: Integer 
4: p7:PARAM(start = 1 final = true )  type: Integer 
5: p6:PARAM(final = true )  = p5  type: Integer 
6: p5:PARAM(final = true )  = 1  type: Integer 
7: p4:PARAM(fixed = false )  type: Integer 
8: p3:PARAM()  = 5  type: Integer 
9: c2:CONST()  = 5  type: Integer 
10: c1:CONST()  = 5  type: Integer 
11: p2:PARAM()  = p1  type: Integer 
12: p1:PARAM()  = 1  type: Integer 


mark: 1
markarr: -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1


After sorting parameters:
================================================================================
Order:
12
11
10
9
8
7
6
5
4
3
2
1


After replacing the evaluated parameters in parameter bindings:
================================================================================
All replacements:
Replacements: (2)
========================================
p5 -> 1
p6 -> 1

Replacements that will be replaced in the DAE:
Replacements: (2)
========================================
p5 -> 1
p6 -> 1

globalKnownVars (12)
========================================
1: pr2:PARAM(protected = true )  = pr1  type: Integer 
2: pr1:PARAM(protected = true )  = 5  type: Integer 
3: p8:PARAM(start = 2 * p3 )  type: Integer 
4: p7:PARAM(start = 1 final = true )  type: Integer 
5: p6:PARAM(final = true )  = 1  type: Integer 
6: p5:PARAM(final = true )  = 1  type: Integer 
7: p4:PARAM(fixed = false )  type: Integer 
8: p3:PARAM()  = 5  type: Integer 
9: c2:CONST()  = 5  type: Integer 
10: c1:CONST()  = 5  type: Integer 
11: p2:PARAM()  = p1  type: Integer 
12: p1:PARAM()  = 1  type: Integer 


mark: 1
markarr: -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1


After replacing the evaluated parameters in variable bindings and start attributes:
================================================================================
All replacements:
Replacements: (2)
========================================
p5 -> 1
p6 -> 1

Replacements that will be replaced in the DAE:
Replacements: (2)
========================================
p5 -> 1
p6 -> 1

globalKnownVars (12)
========================================
1: pr2:PARAM(protected = true )  = pr1  type: Integer 
2: pr1:PARAM(protected = true )  = 5  type: Integer 
3: p8:PARAM(start = 2 * p3 )  type: Integer 
4: p7:PARAM(start = 1 final = true )  type: Integer 
5: p6:PARAM(final = true )  = 1  type: Integer 
6: p5:PARAM(final = true )  = 1  type: Integer 
7: p4:PARAM(fixed = false )  type: Integer 
8: p3:PARAM()  = 5  type: Integer 
9: c2:CONST()  = 5  type: Integer 
10: c1:CONST()  = 5  type: Integer 
11: p2:PARAM()  = p1  type: Integer 
12: p1:PARAM()  = 1  type: Integer 


mark: 1
markarr: -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1


########################################
DAE after replacing the evaluated parameters
########################################


unknown partition
========================================

no matching



BackendDAEType: simulation


Known variables only depending on parameters and constants - globalKnownVars (12)
========================================
1: pr2:PARAM(protected = true )  = pr1  type: Integer 
2: pr1:PARAM(protected = true )  = 5  type: Integer 
3: p8:PARAM(start = 2 * p3 )  type: Integer 
4: p7:PARAM(start = 1 final = true )  type: Integer 
5: p6:PARAM(final = true )  = 1  type: Integer 
6: p5:PARAM(final = true )  = 1  type: Integer 
7: p4:PARAM(fixed = false )  type: Integer 
8: p3:PARAM()  = 5  type: Integer 
9: c2:CONST()  = 5  type: Integer 
10: c1:CONST()  = 5  type: Integer 
11: p2:PARAM()  = p1  type: Integer 
12: p1:PARAM()  = 1  type: Integer 



END of preOptModule 'evaluateParameters'
********************************************************************************

record SimulationResult
    resultFile = "parameterTest15_res.mat",
    simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-006, method = 'dassl', fileNamePrefix = 'parameterTest15', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = '-output=p1,p2,p3'",
    messages = "LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
time=1,p1=1,p2=1,p3=5
LOG_SUCCESS       | info    | The simulation finished successfully.
"
end SimulationResult;
"[<interactive>:12:3-12:36:writable] Warning: Parameter p8 has no value, and is fixed during initialization (fixed=true), using available start value (start=2 * p3) as default value.
[<interactive>:11:3-11:39:writable] Warning: Parameter p7 has no value, and is fixed during initialization (fixed=true), using available start value (start=1) as default value.
Warning: The initial conditions are not fully specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
"
1
""

Equation mismatch: diff says:
--- /tmp/omc-rtest-adrpo33/simulation/modelica/parameters/parameterTest15.mos_temp8626/equations-expected2019-05-07 13:45:37.785926900 +0200
+++ /tmp/omc-rtest-adrpo33/simulation/modelica/parameters/parameterTest15.mos_temp8626/equations-got2019-05-07 13:45:52.675944700 +0200
@@ -233,22 +233,17 @@
 END of preOptModule 'evaluateParameters'
 ********************************************************************************
 
 record SimulationResult
 resultFile = "parameterTest15_res.mat",
-simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-06, method = 'dassl', fileNamePrefix = 'parameterTest15', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = '-output=p1,p2,p3'",
+simulationOptions = "startTime = 0.0, stopTime = 1.0, numberOfIntervals = 500, tolerance = 1e-006, method = 'dassl', fileNamePrefix = 'parameterTest15', options = '', outputFormat = 'mat', variableFilter = '.*', cflags = '', simflags = '-output=p1,p2,p3'",
 messages = "LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
 time=1,p1=1,p2=1,p3=5
 LOG_SUCCESS       | info    | The simulation finished successfully.
 "
 end SimulationResult;
 "[<interactive>:12:3-12:36:writable] Warning: Parameter p8 has no value, and is fixed during initialization (fixed=true), using available start value (start=2 * p3) as default value.
 [<interactive>:11:3-11:39:writable] Warning: Parameter p7 has no value, and is fixed during initialization (fixed=true), using available start value (start=1) as default value.
 Warning: The initial conditions are not fully specified. For more information set -d=initialization. In OMEdit Tools->Options->Simulation->OMCFlags, in OMNotebook call setCommandLineOptions("-d=initialization").
 "
-stdout            | warning | It is not possible to override the following quantity: p2
-|                 | |       | It seems to be structural, final, protected or evaluated or has a non-constant binding.
-LOG_SUCCESS       | info    | The initialization finished successfully without homotopy method.
-time=1,p1=2,p2=2,p3=10
-LOG_SUCCESS       | info    | The simulation finished successfully.
-0
+1
 ""

Equation mismatch: omc-diff says:
Line 248: Lexical token differs:
expected: stdout            | warning | It is not possible to override the following quantity: p
got:      1

== 1 out of 1 tests failed [simulation/modelica/parameters/parameterTest15.mos_temp8626, time: 16]

Powered by Hudson Open Source Continuous Integration Server from the Eclipse Foundation